743 research outputs found
Balancing experiments on a torque-controlled humanoid with hierarchical inverse dynamics
Recently several hierarchical inverse dynamics controllers based on cascades
of quadratic programs have been proposed for application on torque controlled
robots. They have important theoretical benefits but have never been
implemented on a torque controlled robot where model inaccuracies and real-time
computation requirements can be problematic. In this contribution we present an
experimental evaluation of these algorithms in the context of balance control
for a humanoid robot. The presented experiments demonstrate the applicability
of the approach under real robot conditions (i.e. model uncertainty, estimation
errors, etc). We propose a simplification of the optimization problem that
allows us to decrease computation time enough to implement it in a fast torque
control loop. We implement a momentum-based balance controller which shows
robust performance in face of unknown disturbances, even when the robot is
standing on only one foot. In a second experiment, a tracking task is evaluated
to demonstrate the performance of the controller with more complicated
hierarchies. Our results show that hierarchical inverse dynamics controllers
can be used for feedback control of humanoid robots and that momentum-based
balance control can be efficiently implemented on a real robot.Comment: appears in IEEE/RSJ International Conference on Intelligent Robots
and Systems (IROS), 201
Straight-Leg Walking Through Underconstrained Whole-Body Control
We present an approach for achieving a natural, efficient gait on bipedal
robots using straightened legs and toe-off. Our algorithm avoids complex height
planning by allowing a whole-body controller to determine the straightest
possible leg configuration at run-time. The controller solutions are biased
towards a straight leg configuration by projecting leg joint angle objectives
into the null-space of the other quadratic program motion objectives. To allow
the legs to remain straight throughout the gait, toe-off was utilized to
increase the kinematic reachability of the legs. The toe-off motion is achieved
through underconstraining the foot position, allowing it to emerge naturally.
We applied this approach of under-specifying the motion objectives to the Atlas
humanoid, allowing it to walk over a variety of terrain. We present both
experimental and simulation results and discuss performance limitations and
potential improvements.Comment: Submitted to 2018 IEEE International Conference on Robotics and
Automatio
Recommended from our members
High-performance series elastic actuation
textMobile legged robots have the potential to restructure many aspects of our lives in the near future. Whether for applications in household care, entertainment, or disaster response, these systems depend on high-performance actuators to improve their basic capabilities. The work presented here focuses on developing new high-performance actuators, specifically series elastic actuators, to address this need. We adopt a system-wide optimization approach, dealing with factors which influence performance at the levels of mechanical design, electrical system design, and control. Using this approach and based on a set of performance metrics, we produce an actuator, the UT-SEA, which achieves leading empirical results in terms of power-to-weight, force control, size, and system efficiency. We also develop general high-performance control techniques for both force- and position-controlled actuators, some of which were adopted for use on NASA-JSC's Valkyrie Humanoid robot and were used during DARPA's DRC Trials 2013 robotics competition.Electrical and Computer Engineerin
Momentum Control with Hierarchical Inverse Dynamics on a Torque-Controlled Humanoid
Hierarchical inverse dynamics based on cascades of quadratic programs have
been proposed for the control of legged robots. They have important benefits
but to the best of our knowledge have never been implemented on a torque
controlled humanoid where model inaccuracies, sensor noise and real-time
computation requirements can be problematic. Using a reformulation of existing
algorithms, we propose a simplification of the problem that allows to achieve
real-time control. Momentum-based control is integrated in the task hierarchy
and a LQR design approach is used to compute the desired associated closed-loop
behavior and improve performance. Extensive experiments on various balancing
and tracking tasks show very robust performance in the face of unknown
disturbances, even when the humanoid is standing on one foot. Our results
demonstrate that hierarchical inverse dynamics together with momentum control
can be efficiently used for feedback control under real robot conditions.Comment: 21 pages, 11 figures, 4 tables in Autonomous Robots (2015
Robot Impedance Control and Passivity Analysis with Inner Torque and Velocity Feedback Loops
Impedance control is a well-established technique to control interaction
forces in robotics. However, real implementations of impedance control with an
inner loop may suffer from several limitations. Although common practice in
designing nested control systems is to maximize the bandwidth of the inner loop
to improve tracking performance, it may not be the most suitable approach when
a certain range of impedance parameters has to be rendered. In particular, it
turns out that the viable range of stable stiffness and damping values can be
strongly affected by the bandwidth of the inner control loops (e.g. a torque
loop) as well as by the filtering and sampling frequency. This paper provides
an extensive analysis on how these aspects influence the stability region of
impedance parameters as well as the passivity of the system. This will be
supported by both simulations and experimental data. Moreover, a methodology
for designing joint impedance controllers based on an inner torque loop and a
positive velocity feedback loop will be presented. The goal of the velocity
feedback is to increase (given the constraints to preserve stability) the
bandwidth of the torque loop without the need of a complex controller.Comment: 14 pages in Control Theory and Technology (2016
Recommended from our members
Control Implementation of Dynamic Locomotion on Compliant, Underactuated, Force-Controlled Legged Robots with Non-Anthropomorphic Design
The control of locomotion on legged robots traditionally involves a robot that takes a standard legged form, such as the anthropomorphic humanoid, the dog-like quadruped, or the bird-like biped. Additionally, these systems will often be actuated with position-controlled servos or series-elastic actuators that are connected through rigid links. This work investigates the control implementation of dynamic, force-controlled locomotion on a family of legged systems that significantly deviate from these classic paradigms by incorporating modern, state-of-the-art proprioceptive actuators on uniquely configured compliant legs that do not closely resemble those found in nature. The results of this work can be used to better inform how to implement controllers on legged systems without stiff, position-controlled actuators, and also provide insight on how intelligently designed mechanical features can potentially simplify the control of complex, nonlinear dynamical systems like legged robots. To this end, this work presents the approach to control for a family of non-anthropomorphic bipedal robotic systems which are developed both in simulation and with physical hardware. The first is the Non-Anthropomorphic Biped, Version 1 (NABi-1) that features position-controlled joints along with a compliant foot element on a minimally actuated leg, and is controlled using simple open-loop trajectories based on the Zero Moment Point. The second system is the second version of the non-anthropomorphic biped (NABi-2) which utilizes the proprioceptive Back-drivable Electromagnetic Actuator for Robotics (BEAR) modules for actuation and fully realizes feedback-based force controlled locomotion. These systems are used to highlight both the strengths and weaknesses of utilizing proprioceptive actuation in systems, and suggest the tradeoffs that are made when using force control for dynamic locomotion. These systems also present case studies for different approaches to system design when it comes to bipedal legged robots
Robust Whole-Body Motion Control of Legged Robots
We introduce a robust control architecture for the whole-body motion control
of torque controlled robots with arms and legs. The method is based on the
robust control of contact forces in order to track a planned Center of Mass
trajectory. Its appeal lies in the ability to guarantee robust stability and
performance despite rigid body model mismatch, actuator dynamics, delays,
contact surface stiffness, and unobserved ground profiles. Furthermore, we
introduce a task space decomposition approach which removes the coupling
effects between contact force controller and the other non-contact controllers.
Finally, we verify our control performance on a quadruped robot and compare its
performance to a standard inverse dynamics approach on hardware.Comment: 8 Page
- …