Design an intelligent controller for full vehicle nonlinear active suspension systems

The main objective of designed the controller for a vehicle suspension system is to reduce the discomfort sensed by passengers which arises from road roughness and to increase the ride handling associated with the pitching and rolling movements. This necessitates a very fast and accurate controller to meet as much control objectives, as possible. Therefore, this paper deals with an artificial intelligence Neuro-Fuzzy (NF) technique to design a robust controller to meet the control objectives. The advantage of this controller is that it can handle the nonlinearities faster than other conventional controllers. The approach of the proposed controller is to minimize the vibrations on each corner of vehicle by supplying control forces to suspension system when travelling on rough road. The other purpose for using the NF controller for vehicle model is to reduce the body inclinations that are made during intensive manoeuvres including braking and cornering. A full vehicle nonlinear active suspension system is introduced and tested. The robustness of the proposed controller is being assessed by comparing with an optimal Fractional Order (FOPID) controller. The results show that the intelligent NF controller has improved the dynamic response measured by decreasing the cost function

Navigation of Mobile Robot using Fuzzy Logic

In this paper research has been carried out to develop a navigation technique for an autonomous robot to work in a real world environment, which should be capable of identifying and avoiding obstacles, specifically in a very busy a demanding environment. In this paper better technique is develop in navigating mobile robot in above mention environment. The action and reaction of the robot is addressed by fuzzy logic control system. The input fuzzy members are turn angle between the robot head and the target, distance of the obstacles present all around the robot (left, right, front, back).The above mention input members are senses by series of infrared sensors. The presented FLC for navigation of robot has been applied in all complex and adverse environment. The results are hold good for all the above mention conditions

Diseño de un controlador neuro difuzo para controlar la velocidad de un motor de corriente continua

Las Redes Neuronales Artificiales (RNA) son aquellas que emulan el comportamiento de las redes neuronales biológicas y se han estado utilizando desde hace más de 30 años para aprender estrategias de solución basadas en ejemplos de comportamiento típico de patrones. Estos sistemas no requieren que la tarea a ejecutar se programe, ellos generalizan y aprenden de la experiencia. Las redes neuronales biológicas están constituidas por tres partes principales: dendritas, cuerpo de la célula o soma y axón. Las dendritas son fibras nerviosas que se encargan de la recepción de señales eléctricas y llevan dichas señales al soma, este último cumple la función de acumular estas señales de entrada y las transfiere al axón el cual las entrega a las neuronas adyacentes. El punto de contacto entre el axón de una neurona y una dendrita de otra es conocido como sinapsis

Evolutionary and Reinforcement Fuzzy Control

Many modern and classical techniques exist for the design of control systems. However, many real world applications are inherently complex and the application of traditional design and control techniques is limited. In addition, no single design method exists which can be applied to all types of system. Due to this 'deficiency', recent years have seen an exponential increase in the use of methods loosely termed 'computational intelligent techniques' or 'soft- computing techniques'. Such techniques tend to solve problems using a population of individual elements or potential solutions or the flexibility of a network as opposed to using a rigid, single point of computing. Through use of computational redundancies, soft-computing allows unmatched tractability in practical problem solving. The intelligent paradigm most successfully applied to control engineering, is that of fuzzy logic in the form of fuzzy control. The motivation of using fuzzy control is twofold. First, it allows one to incorporate heuristics into the control strategy, such as the model operator actions. Second, it allows nonlinearities to be defined in an intuitive way using rules and interpolations. Although it is an attractive tool, there still exist many problems to be solved in fuzzy control. To date most applications have been limited to relatively simple problems of low dimensionality. This is primarily due to the fact that the design process is very much a trial and error one and is heavily dependent on the quality of expert knowledge provided by the operator. In addition, fuzzy control design is virtually ad hoc, lacking a systematic design procedure. Other problems include those associated with the curse of dimensionality and the inability to learn and improve from experience. While much work has been carried out to alleviate most of these difficulties, there exists a lack of drive and exploration in the last of these points. The objective of this thesis is to develop an automated, systematic procedure for optimally learning fuzzy logic controllers (FLCs), which provides for autonomous and simple implementations. In pursuit of this goal, a hybrid method is to combine the advantages artificial neural networks (ANNs), evolutionary algorithms (EA) and reinforcement learning (RL). This overcomes the deficiencies of conventional EAs that may omit representation of the region within a variable's operating range and that do not in practice achieve fine learning. This method also allows backpropagation when necessary or feasible. It is termed an Evolutionary NeuroFuzzy Learning Intelligent Control technique (ENFLICT) model. Unlike other hybrids, ENFLICT permits globally structural learning and local offline or online learning. The global EA and local neural learning processes should not be separated. Here, the EA learns and optimises the ENFLICT structure while ENFLICT learns the network parameters. The EA used here is an improved version of a technique known as the messy genetic algorithm (mGA), which utilises flexible cellular chromosomes for structural optimisation. The properties of the mGA as compared with other flexible length EAs, are that it enables the addressing of issues such as the curse of dimensionality and redundant genetic information. Enhancements to the algorithm are in the coding and decoding of the genetic information to represent a growing and shrinking network; the defining of the network properties such as neuron activation type and network connectivity; and that all of this information is represented in a single gene. Another step forward taken in this thesis on neurofuzzy learning is that of learning online. Online in this case refers to learning unsupervised and adapting to real time system parameter changes. It is much more attractive because the alternative (supervised offline learning) demands quality learning data which is often expensive to obtain, and unrepresentative of and inaccurate about the real environment. First, the learning algorithm is developed for the case of a given model of the system where the system dynamics are available or can be obtained through, for example, system identification. This naturally leads to the development of a method for learning by directly interacting with the environment. The motivation for this is that usually real world applications tend to be large and complex, and obtaining a mathematical model of the plant is not always possible. For this purpose the reinforcement learning paradigm is utilised, which is the primary learning method of biological systems, systems that can adapt to their environment and experiences, in this thesis, the reinforcement learning algorithm is based on the advantage learning method and has been extended to deal with continuous time systems and online implementations, and which does not use a lookup table. This means that large databases containing the system behaviour need not be constructed, and the procedure can work online where the information available is that of the immediate situation. For complex systems of higher order dimensions, and where identifying the system model is difficult, a hierarchical method has been developed and is based on a hybrid of all the other methods developed. In particular, the procedure makes use of a method developed to work directly with plant step response, thus avoiding the need for mathematical model fitting which may be time-consuming and inaccurate. All techniques developed and contributions in the thesis are illustrated by several case studies, and are validated through simulations

Neuro-fuzzy modelling and control of robotic manipulators

The work reported in this thesis aims to design and develop a new neuro-fuzzy control system for robotic manipulators using Machine Learning Techniques, Fuzzy Logic Controllers, and Fuzzy Neural Networks. The main idea is to integrate these intelligent techniques to develop an adaptive position controller for robotic manipulators. This will finally lead to utilising one or two coordinated manipulators to perform upper-limb rehabilitation. The main target is to benefit from these intelligent techniques in a systematic way that leads to an efficient control and coordination system. The suggested control system possesses self-learning features so that it can maintain acceptable performance in the presence of uncertain loads. Simulation and modelling stages were performed using dynamical virtual reality programs to demonstrate the ideas of the control and coordination techniques. The first part of the thesis focuses on the development of neuro-fuzzy models that meet the above requirement of mimicking both kinematics and dynamics behaviour of the manipulator. For this purpose, an initial stage for data collection from the motion of the manipulator along random trajectories was performed. These data were then compacted with the help of inductive learning techniques into two sets of if-then rules that form approximation for both of the inverse kinematics and inverse dynamics of the manipulator. These rules were then used in fuzzy neural networks with differentiation characteristics to achieve online tuning of the network adjustable parameters. The second part of the thesis introduces the proposed adaptive neuro-fuzzy joint-based controller. To achieve this target, a feedback Fuzzy-Proportional-Integral-Derivative incremental controller was developed. This controller was then applied as a joint servo-controller for each robot link in addition to the main neuro-fuzzy feedforward controller used to compensate for the dynamics interactions between robot links. A feedback error learning scheme was applied to tune the feedforward neuro-fuzzy controller online using the error back-propagation algorithm. The third part of the thesis presents a neuro-fuzzy Cartesian internal model control system for robotic manipulators. The neuro-fuzzy inverse kinematics model of the manipulator was used in addition to the joint-based controller proposed and the forward mathematical model of the manipulator in an adaptive internal model controller structure. Feedback-error learning scheme was extended to tune both of the joint-based neuro-fuzzy controller and the neuro-fuzzy internal model controller online. The fourth part of the thesis suggests a simple fuzzy hysteresis coordination scheme for two position-controlled robot manipulators. The coordination scheme is based on maintaining certain kinematic relationships between the two manipulators using reference motion synchronisation without explicitly involving the hybrid position/force control or modifying the existing controller structure for either of the manipulators. The key to the success of the new method is to ensure that each manipulator is capable of tracking its own desired trajectory using its own position controller, while synchronizing its motion with the other manipulator motion so that the differential position error between the two manipulators is reduced to zero or kept within acceptable limits. A simplified test-bench emulating upper-limb rehabilitation was used to test the proposed coordination technique experimentally