13,363 research outputs found
State-of-the-art in aerodynamic shape optimisation methods
Aerodynamic optimisation has become an indispensable component for any aerodynamic design over the past 60 years, with applications to aircraft, cars, trains, bridges, wind turbines, internal pipe flows, and cavities, among others, and is thus relevant in many facets of technology. With advancements in computational power, automated design optimisation procedures have become more competent, however, there is an ambiguity and bias throughout the literature with regards to relative performance of optimisation architectures and employed algorithms. This paper provides a well-balanced critical review of the dominant optimisation approaches that have been integrated with aerodynamic theory for the purpose of shape optimisation. A total of 229 papers, published in more than 120 journals and conference proceedings, have been classified into 6 different optimisation algorithm approaches. The material cited includes some of the most well-established authors and publications in the field of aerodynamic optimisation. This paper aims to eliminate bias toward certain algorithms by analysing the limitations, drawbacks, and the benefits of the most utilised optimisation approaches. This review provides comprehensive but straightforward insight for non-specialists and reference detailing the current state for specialist practitioners
Algorithm Portfolio for Individual-based Surrogate-Assisted Evolutionary Algorithms
Surrogate-assisted evolutionary algorithms (SAEAs) are powerful optimisation
tools for computationally expensive problems (CEPs). However, a randomly
selected algorithm may fail in solving unknown problems due to no free lunch
theorems, and it will cause more computational resource if we re-run the
algorithm or try other algorithms to get a much solution, which is more serious
in CEPs. In this paper, we consider an algorithm portfolio for SAEAs to reduce
the risk of choosing an inappropriate algorithm for CEPs. We propose two
portfolio frameworks for very expensive problems in which the maximal number of
fitness evaluations is only 5 times of the problem's dimension. One framework
named Par-IBSAEA runs all algorithm candidates in parallel and a more
sophisticated framework named UCB-IBSAEA employs the Upper Confidence Bound
(UCB) policy from reinforcement learning to help select the most appropriate
algorithm at each iteration. An effective reward definition is proposed for the
UCB policy. We consider three state-of-the-art individual-based SAEAs on
different problems and compare them to the portfolios built from their
instances on several benchmark problems given limited computation budgets. Our
experimental studies demonstrate that our proposed portfolio frameworks
significantly outperform any single algorithm on the set of benchmark problems
Self-Adaptive Surrogate-Assisted Covariance Matrix Adaptation Evolution Strategy
This paper presents a novel mechanism to adapt surrogate-assisted
population-based algorithms. This mechanism is applied to ACM-ES, a recently
proposed surrogate-assisted variant of CMA-ES. The resulting algorithm,
saACM-ES, adjusts online the lifelength of the current surrogate model (the
number of CMA-ES generations before learning a new surrogate) and the surrogate
hyper-parameters. Both heuristics significantly improve the quality of the
surrogate model, yielding a significant speed-up of saACM-ES compared to the
ACM-ES and CMA-ES baselines. The empirical validation of saACM-ES on the
BBOB-2012 noiseless testbed demonstrates the efficiency and the scalability
w.r.t the problem dimension and the population size of the proposed approach,
that reaches new best results on some of the benchmark problems.Comment: Genetic and Evolutionary Computation Conference (GECCO 2012) (2012
Towards the Evolution of Novel Vertical-Axis Wind Turbines
Renewable and sustainable energy is one of the most important challenges
currently facing mankind. Wind has made an increasing contribution to the
world's energy supply mix, but still remains a long way from reaching its full
potential. In this paper, we investigate the use of artificial evolution to
design vertical-axis wind turbine prototypes that are physically instantiated
and evaluated under approximated wind tunnel conditions. An artificial neural
network is used as a surrogate model to assist learning and found to reduce the
number of fabrications required to reach a higher aerodynamic efficiency,
resulting in an important cost reduction. Unlike in other approaches, such as
computational fluid dynamics simulations, no mathematical formulations are used
and no model assumptions are made.Comment: 14 pages, 11 figure
mfEGRA: Multifidelity Efficient Global Reliability Analysis through Active Learning for Failure Boundary Location
This paper develops mfEGRA, a multifidelity active learning method using
data-driven adaptively refined surrogates for failure boundary location in
reliability analysis. This work addresses the issue of prohibitive cost of
reliability analysis using Monte Carlo sampling for expensive-to-evaluate
high-fidelity models by using cheaper-to-evaluate approximations of the
high-fidelity model. The method builds on the Efficient Global Reliability
Analysis (EGRA) method, which is a surrogate-based method that uses adaptive
sampling for refining Gaussian process surrogates for failure boundary location
using a single-fidelity model. Our method introduces a two-stage adaptive
sampling criterion that uses a multifidelity Gaussian process surrogate to
leverage multiple information sources with different fidelities. The method
combines expected feasibility criterion from EGRA with one-step lookahead
information gain to refine the surrogate around the failure boundary. The
computational savings from mfEGRA depends on the discrepancy between the
different models, and the relative cost of evaluating the different models as
compared to the high-fidelity model. We show that accurate estimation of
reliability using mfEGRA leads to computational savings of 46% for an
analytic multimodal test problem and 24% for a three-dimensional acoustic horn
problem, when compared to single-fidelity EGRA. We also show the effect of
using a priori drawn Monte Carlo samples in the implementation for the acoustic
horn problem, where mfEGRA leads to computational savings of 45% for the
three-dimensional case and 48% for a rarer event four-dimensional case as
compared to single-fidelity EGRA
Scalarizing Functions in Bayesian Multiobjective Optimization
Scalarizing functions have been widely used to convert a multiobjective
optimization problem into a single objective optimization problem. However,
their use in solving (computationally) expensive multi- and many-objective
optimization problems in Bayesian multiobjective optimization is scarce.
Scalarizing functions can play a crucial role on the quality and number of
evaluations required when doing the optimization. In this article, we study and
review 15 different scalarizing functions in the framework of Bayesian
multiobjective optimization and build Gaussian process models (as surrogates,
metamodels or emulators) on them. We use expected improvement as infill
criterion (or acquisition function) to update the models. In particular, we
compare different scalarizing functions and analyze their performance on
several benchmark problems with different number of objectives to be optimized.
The review and experiments on different functions provide useful insights when
using and selecting a scalarizing function when using a Bayesian multiobjective
optimization method
Flux Weakening Strategy Optimization for Five-Phase PM Machine with Concentrated Windings
The paper applies an Efficient Global Optimization method (EGO) to improve the efficiency, in flux weakening region, of a given 5-phase Permanent Magnet (PM) machine. An optimal control for the four independent currents is thus defined. Moreover, a modification proposal of the machine geometry is added to the optimization process of the global drive. The effectiveness of the method allows solving the challenge which consists in taking into account inside the control strategy the eddy-current losses in magnets and iron. In fact, magnet losses are a critical point to protect the machine from demagnetization in flux-weakening region. But these losses, which highly depend on magnetic state of the machine, must be calculated by Finite Element Method (FEM) to be accurate. The FEM has the drawback to be time consuming. It is why a direct optimization using FEM is critical. EGO method, using sparingly FEM, allows to find a feasible solution to this hard optimization problem of control and design of multi-phase drive
- âŠ