8,998 research outputs found

    Pilot Decontamination Through Pilot Sequence Hopping in Massive MIMO Systems

    Get PDF
    This work concerns wireless cellular networks applying massive multiple-input multiple-output (MIMO) technology. In such a system, the base station in a given cell is equipped with a very large number (hundreds or even thousands) of antennas and serves multiple users. Estimation of the channel from the base station to each user is performed at the base station using an uplink pilot sequence. Such a channel estimation procedure suffers from pilot contamination. Orthogonal pilot sequences are used in a given cell but, due to the shortage of orthogonal sequences, the same pilot sequences must be reused in neighboring cells, causing pilot contamination. The solution presented in this paper suppresses pilot contamination, without the need for coordination among cells. Pilot sequence hopping is performed at each transmission slot, which provides a randomization of the pilot contamination. Using a modified Kalman filter, it is shown that such randomized contamination can be significantly suppressed. Comparisons with conventional estimation methods show that the mean squared error can be lowered as much as an order of magnitude at low mobility

    MIMO Radar Ambiguity Properties and Optimization Using Frequency-Hopping Waveforms

    Get PDF
    The concept of multiple-input multiple-output (MIMO) radars has drawn considerable attention recently. Unlike the traditional single-input multiple-output (SIMO) radar which emits coherent waveforms to form a focused beam, the MIMO radar can transmit orthogonal (or incoherent) waveforms. These waveforms can be used to increase the system spatial resolution. The waveforms also affect the range and Doppler resolution. In traditional (SIMO) radars, the ambiguity function of the transmitted pulse characterizes the compromise between range and Doppler resolutions. It is a major tool for studying and analyzing radar signals. Recently, the idea of ambiguity function has been extended to the case of MIMO radar. In this paper, some mathematical properties of the MIMO radar ambiguity function are first derived. These properties provide some insights into the MIMO radar waveform design. Then a new algorithm for designing the orthogonal frequency-hopping waveforms is proposed. This algorithm reduces the sidelobes in the corresponding MIMO radar ambiguity function and makes the energy of the ambiguity function spread evenly in the range and angular dimensions

    Multiple Signal Classification for Determining Direction of Arrival of Frequency Hopping Spread Spectrum Signals

    Get PDF
    This research extends a MUSIC algorithm to determine DOA of FHSS signals. All incident FHSS signals have unknown DOA and use PSK. Conventional MUSIC algorithm involves multiple MUSIC estimation for all frequency bins. On the other hand, the extended development is meant to execute a single MUSIC algorithm of observations on multiple frequency bins or hops. The new extension shows better performance compared to the conventional MUSIC execution at different SNR levels. Both have the same power accumulation at the true angles of arrival. However, the new development has lower side lobes and hence helps avoid false detections. In addition, the new development has lower side lobes variance resulting in lower error of false detections compared to the normal execution. Simulation results show that the new extension is sensitive to the SNR values and number of samples taken at each frequency bin. However, it is less sensitive to the possible number of frequency hops or hop set and number of array sensors

    Time-Hopping Multicarrier Code-Division Multiple-Access

    No full text
    A time-hopping multicarrier code-division multiple-access (TH/MC-CDMA) scheme is proposed and investigated. In the proposed TH/MC-CDMA each information symbol is transmitted by a number of time-domain pulses with each time-domain pulse modulating a subcarrier. The transmitted information at the receiver is extracted from one of the, say MM, possible time-slot positions, i.e., assuming that MM-ary pulse position modulation is employed. Specifically, in this contribution we concentrate on the scenarios such as system design, power spectral density (PSD) and single-user based signal detection. The error performance of the TH/MC-CDMA system is investigated, when each subcarrier signal experiences flat Nakagami-mm fading in addition to additive white Gaussian noise (AWGN). According to our analysis and results, it can be shown that the TH/MC-CDMA signal is capable of providing a near ideal PSD, which is flat over the system bandwidth available, while decreases rapidly beyond that bandwidth. Explicitly, signals having this type of PSD is beneficial to both broadband and ultra-wide bandwidth (UWB) communications. Furthermore, our results show that, when optimum user address codes are employed, the single-user detector considered is near-far resistant, provided that the number of users supported by the system is lower than the number of subcarriers used for conveying an information symbol

    Identification of Radar Signals Based on Time-Frequency Agility using Short-Time Fourier Transform

    Get PDF
    With modern advances in radar technologies and increased complexity in aerial battle, there is need for knowledge acquisition on the abilities and operating characteristics of intercepted hostile systems. The required knowledge obtained through advanced signal processing is necessary for either real time-warning or in order to determine Electronic Order of Battle (EOB) of these systems. An algorithm was therefore developed in this paper based on a joint Time-Frequency Distribution (TFD) in order to identify the time-frequency agility of radar signals based on its changing pulse characteristics. The joint TFD used in this paper was the square magnitude of the Short-Time Fourier Transform (STFT), where power and frequency obtained at instants of time from its Time-Frequency Representation (TFR) was used to estimate the time and frequency parameters of the radar signals respectively. Identification was thereafter done through classification of the signals using a rule-based classifier formed from the estimated time and frequency parameters. The signals considered in this paper were the simple pulsed, pulse repetition interval modulated, frequency hopping and the agile pulsed radar signals, which represent cases of various forms of agility associated with modern radar technologies. Classification accuracy was verified using the Monte Carlo simulation performed at various ranges of Signal-to-Noise Ratios (SNRs) in the presence of noise modelled by the Additive White Gaussian Noise (AWGN). Results obtained showed identification accuracy of 99% irrespective of the signal at a minimum SNR of 0dB where signal and noise power were the same. The obtained minimum SNR at this classification accuracy showed that the developed algorithm can be deployed practically in the electronic warfare field for accurate agility classification of airborne radar signals
    corecore