26 research outputs found
A low-area reference-free power supply sensor
Power supply unpredictable uctuations jeopardize the functioning of several types of current electronic systems. This work presents a power supply sensor based on a voltage divider followed by buffer-comparator cells employing just MOSFET transistors and provides a digital output. The divider outputs are designed to change more slowly than the thresholds of the comparators, in this way the sensor is able to detect voltage droops. The sensor is implemented in a 65nm technology node occupying an area of 2700?m2 and displaying a power consumption of 50?W. It is designed to work with no voltage reference and with no clock and aiming to obtain a fast response
Measuring Code Optimization Impact on Voltage Noise
In this paper, we characterize the impact of compiler optimizations on voltage noise. While intuition may suggest that the better processor utilization ensured by optimizing compilers results in a small amount of voltage variation, our measurements on a Intel® Core™2 Due Processor show the opposite - the majority of SPEC 2006 benchmarks exhibit more voltage droops when aggressively optimized. We show that this increase in noise could be sufficient for a net performance decrease in a typical case, resilient design.Engineering and Applied Science
Recommended from our members
Characterization of voltage noise in big, small and single-ISA heterogeneous systems
Sensitivity of the microprocessor to voltage fluctuations is becoming a major concern with growing emphasis on designing power-efficient microprocessors. Voltage fluctuations that exceed a certain threshold cause "emergencies" that can lead to timing errors in the processor, thus risking reliability. To guarantee correctness under such conditions, large voltage guardbands are employed, at the cost of reduced performance and wastage of power. Trends in microprocessor technology indicate that worst-case operating voltage margins are not sustainable. Since voltage emergencies occur only infrequently, resilient architectures with aggressive guardbands are needed. However, to enable the exploration of the design space of resilient processors, it is important to have a deep understanding of the characteristics of voltage noise in different system configurations. Prior research in this area has mostly focused on systems with very few cores. Given the increasing relevance of large multi-core systems, this thesis presents a detailed characterization of voltage noise on chip multi-processors, consisting of large number of cores. The data indicates that while the worst case voltage droop increases with increase in the number of cores, the frequency of occurrence of the droops is not greatly impacted, emphasizing the feasibility of employing resilient microarchitectures with aggressive voltage margins. The thesis also presents a comparative study of voltage noise in CMPs consisting of either high-performant out-of-order cores and power-efficient in-order cores. The study highlights that the out-of-order cores experience much larger voltage variations when compared to the in-order cores, but offer a clear advantage in terms of performance. Experiments indicate that in-order configurations that offer equivalent performance to the out-of-order cores result in large energy-delay product, indicating the trade-offs involved in designing for performance, power and reliability. The thesis also presents a study of voltage noise in single-ISA heterogeneous configurations, to highlight the benefits of such systems towards lowering the worst-case voltage margins, which improve both performance and power. The experimental results indicate that the worst-case voltage droop in such heterogeneous systems lies in between the out-of-order and in-order cores and provide reasonable power-efficiency and performance. Further, the work highlights the importance of exploring the design-space of heterogeneous systems considering reliability as an important design criteria.Computer Science
Design methodology and productivity improvement in high speed VLSI circuits
2017 Spring.Includes bibliographical references.To view the abstract, please see the full text of the document
Recommended from our members
Characterization and management of voltage noise in multi-core, multi-threaded processors
textReliability is one of the important issues of recent microprocessor design. Processors must provide correct behavior as users expect, and must not fail at any time. However, unreliable operation can be caused by excessive supply voltage fluctuations due to an inductive part in a microprocessor power distribution network. This voltage fluctuation issue is referred to as inductive or di/dt noise, and requires thorough analysis and sophisticated design solutions. This dissertation proposes an automated stressmark generation framework to characterize di/dt noise effect, and suggests a practical solution for management of di/dt effects while achieving performance and energy goals. First, the di/dt noise issue is analyzed from theory to a practical view. Inductance is a parasitic part in power distribution network for microprocessor, and its characteristics such as resonant frequencies are reviewed. Then, it is shown that supply voltage fluctuation from resonant behavior is much harmful than single event voltage fluctuations. Voltage fluctuations caused by standard benchmarks such as SPEC CPU2006, PARSEC, Linpack, etc. are studied. Next, an AUtomated DI/dT stressmark generation framework, referred to as AUDIT, is proposed to identify maximum voltage droop in a microprocessor power distribution network. The di/dt stressmark generated from AUDIT framework is an instruction sequence, which draws periodic high and low current pulses that maximize voltage fluctuations including voltage droops. AUDIT uses a Genetic Algorithm in scheduling and optimizing candidate instruction sequences to create a maximum voltage droop. In addition, AUDIT provides with both simulation and hardware measurement methods for finding maximum voltage droops in different design and verification stages of a processor. Failure points in hardware due to voltage droops are analyzed. Finally, a hardware technique, floating-point (FP) issue throttling, is examined, which provides a reduction in worst case voltage droop. This dissertation shows the impact of floating point throttling on voltage droop, and translates this reduction in voltage droop to an increase in operating frequency because additional guardband is no longer required to guard against droops resulting from heavy floating point usage. This dissertation presents two techniques to dynamically determine when to tradeoff FP throughput for reduced voltage margin and increased frequency. These techniques can work in software level without any modification of existing hardware.Electrical and Computer Engineerin
Recommended from our members
Active timing margin management to improve microprocessor power efficiency
Improving power/performance efficiency is critical for today’s micro- processors. From edge devices to datacenters, lower power or higher performance always produces better systems, measured by lower cost of ownership or longer battery time. This thesis studies improving microprocessor power/performance efficiency by optimizing the pipeline timing margin. In particular, this thesis focuses on improving the efficacy of Active Timing Margin, a young technology that dynamically adjusts the margin.
Active timing margin trims down the pipeline timing margin with a control loop that adjusts voltage and frequency based on real-time chip environment monitoring. The key insight of this thesis is that in order to maximize active timing margin’s efficiency enhancement benefits, synergistic management from processor architecture design and system software scheduling are needed. To that end, this thesis covers the major consumers of pipeline timing margin, including temperature, voltage, and process variation. For temperature variation, the thesis proposes a table-lookup based active timing margin mechanism, and an associated temperature management scheme to minimize power consumption. For voltage variation, the thesis characterizes the limiting factors of adaptive clocking’s power saving and proposes application scheduling to maximize total system power reduction. For process variation, the thesis proposes core-level adaptive clocking reconfiguration to automatically expose inter-core variation and discusses workload scheduling and throttling management to control critical application performance.
The author believes the optimization presented in this thesis can potentially benefit a variety of processor architectures as the conclusions are based on the solid measurement on state-of-the-art processors, and the research objective, active timing margin, already has wide applicability in the latest microprocessors by the time this thesis is written.Electrical and Computer Engineerin
Architecture Independent Timing Speculation Techniques in VLSI Circuits.
Conventional digital circuits must ensure correct operation throughout a wide range of operating conditions including process, voltage, and temperature variation. These conditions have an effect on circuit delays, and safety margins must be put in place which come at a power and performance cost. The Razor system proposed eliminating these timing margins by running a circuit with occasional timing errors and correcting the errors when they occur. Several existing Razor style designs have been proposed, however prior to this work, Razor could not be applied blindly or automatically to designs, as the various error correction schemes modified the architecture of the target design. Because of the architectural invasiveness and design complexities of these techniques, no published Razor style system had been applied to a complete existing commercial processor. Additionally, in all prior Razor-style systems, there is a fundamental tradeoff between speculation window and short path, or minimum delay, constraints, limiting the technique’s effectiveness.
This thesis introduces the concept of Razor using two-phase latch based timing. By identifying and utilizing time borrowing as an error correction mechanism, it allows for Razor to be applied without the need to reload data or replay instructions. This allows for Razor to be blindly and automatically applied to existing designs without detailed knowledge of internal architecture. Additionally, latch based Razor allows for large speculation windows, up to 100% of nominal circuit delay, because it breaks the connection between minimum delay constraints and speculation window. By demonstrating how to transform conventional flip-flop based designs, including those which make use of clock gating, to two-phase latch based timing, Razor can be automatically added to a large set of existing digital designs.
Two forms of latch based Razor are proposed. First, Bubble Razor involves rippling stall cycles throughout a circuit in response to timing errors and is applied to the ARM Cortex-M3 processor, the first ever application of a Razor technique to a complete, existing processor design. Additional work applies Bubble Razor to the ARM Cortex-R4 processor. The second latch based Razor technique, Voltage Razor, uses voltage boosting to correct for timing errors.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/102461/1/mfojtik_1.pd
Modeling the Interdependences between Voltage Fluctuation and BTI Aging
With technology scaling, the susceptibility of circuits to different reliability degradations is steadily increasing. Aging in transistors due to bias temperature instability (BTI) and voltage fluctuation in the power delivery network of circuits due to IR-drops are the most prominent. In this paper, we are reporting for the first time that there are interdependences between voltage fluctuation and BTI aging that are nonnegligible. Modeling and investigating the joint impact of voltage fluctuation and BTI aging on the delay of circuits, while remaining compatible with the existing standard design flow, is indispensable in order to answer the vital question, “what is an efficient (i.e., small, yet sufficient) timing guardband to sustain the reliability of circuit for the projected lifetime?” This is, concisely, the key goal of this paper. Achieving that would not be possible without employing a physics-based BTI model that precisely describes the underlying generation and recovery mechanisms of defects under arbitrary stress waveforms. For this purpose, our model is validated against varied semiconductor measurements covering a wide range of voltage, temperature, frequency, and duty cycle conditions. To bring reliability awareness to existing EDA tool flows, we create standard cell libraries that contain the delay information of cells under the joint impact of aging and IR-drop. Our libraries can be directly deployed within the standard design flow because they are compatible with existing commercial tools (e.g., Synopsys and Cadence). Hence, designers can leverage the mature algorithms of these tools to accurately estimate the required timing guardbands for any circuit despite its complexity. Our investigation demonstrates that considering aging and IR-drop effects independently, as done in the state of the art, leads to employing insufficient and thus unreliable guardbands because of the nonnegligible (on average 15% and up to 25%) underestimations. Importantly, considering interdependences between aging and IR-drop does not only allow correct guardband estimations, but it also results in employing more efficient guardbands