Design of a fault tolerant airborne digital computer. Volume 1: Architecture

This volume is concerned with the architecture of a fault tolerant digital computer for an advanced commercial aircraft. All of the computations of the aircraft, including those presently carried out by analogue techniques, are to be carried out in this digital computer. Among the important qualities of the computer are the following: (1) The capacity is to be matched to the aircraft environment. (2) The reliability is to be selectively matched to the criticality and deadline requirements of each of the computations. (3) The system is to be readily expandable. contractible, and (4) The design is to appropriate to post 1975 technology. Three candidate architectures are discussed and assessed in terms of the above qualities. Of the three candidates, a newly conceived architecture, Software Implemented Fault Tolerance (SIFT), provides the best match to the above qualities. In addition SIFT is particularly simple and believable. The other candidates, Bus Checker System (BUCS), also newly conceived in this project, and the Hopkins multiprocessor are potentially more efficient than SIFT in the use of redundancy, but otherwise are not as attractive

Concepts for on-board satellite image registration. Volume 3: Impact of VLSI/VHSIC on satellite on-board signal processing

Anticipated major advances in integrated circuit technology in the near future are described as well as their impact on satellite onboard signal processing systems. Dramatic improvements in chip density, speed, power consumption, and system reliability are expected from very large scale integration. Improvements are expected from very large scale integration enable more intelligence to be placed on remote sensing platforms in space, meeting the goals of NASA's information adaptive system concept, a major component of the NASA End-to-End Data System program. A forecast of VLSI technological advances is presented, including a description of the Defense Department's very high speed integrated circuit program, a seven-year research and development effort

X-Rel: Energy-Efficient and Low-Overhead Approximate Reliability Framework for Error-Tolerant Applications Deployed in Critical Systems

Triple Modular Redundancy (TMR) is one of the most common techniques in fault-tolerant systems, in which the output is determined by a majority voter. However, the design diversity of replicated modules and/or soft errors that are more likely to happen in the nanoscale era may affect the majority voting scheme. Besides, the significant overheads of the TMR scheme may limit its usage in energy consumption and area-constrained critical systems. However, for most inherently error-resilient applications such as image processing and vision deployed in critical systems (like autonomous vehicles and robotics), achieving a given level of reliability has more priority than precise results. Therefore, these applications can benefit from the approximate computing paradigm to achieve higher energy efficiency and a lower area. This paper proposes an energy-efficient approximate reliability (X-Rel) framework to overcome the aforementioned challenges of the TMR systems and get the full potential of approximate computing without sacrificing the desired reliability constraint and output quality. The X-Rel framework relies on relaxing the precision of the voter based on a systematical error bounding method that leverages user-defined quality and reliability constraints. Afterward, the size of the achieved voter is used to approximate the TMR modules such that the overall area and energy consumption are minimized. The effectiveness of employing the proposed X-Rel technique in a TMR structure, for different quality constraints as well as with various reliability bounds are evaluated in a 15-nm FinFET technology. The results of the X-Rel voter show delay, area, and energy consumption reductions of up to 86%, 87%, and 98%, respectively, when compared to those of the state-of-the-art approximate TMR voters.Comment: This paper has been published in IEEE Transactions on Very Large Scale Integration (VLSI) System

Airborne Advanced Reconfigurable Computer System (ARCS)

A digital computer subsystem fault-tolerant concept was defined, and the potential benefits and costs of such a subsystem were assessed when used as the central element of a new transport's flight control system. The derived advanced reconfigurable computer system (ARCS) is a triple-redundant computer subsystem that automatically reconfigures, under multiple fault conditions, from triplex to duplex to simplex operation, with redundancy recovery if the fault condition is transient. The study included criteria development covering factors at the aircraft's operation level that would influence the design of a fault-tolerant system for commercial airline use. A new reliability analysis tool was developed for evaluating redundant, fault-tolerant system availability and survivability; and a stringent digital system software design methodology was used to achieve design/implementation visibility

A dependable anisotropic magnetoresistance sensor system for automotive applications

The increasing usage of electronic systems in automotive applications aims to enhance passenger safety as well as the performance of the cars. In modern vehicles, the mechanical and hydraulic systems traditionally used have been replaced by X-by-wire systems in which the functions are performed by electronic components. However, the components required should be reliable, have a high-performance, low-cost and capable of operating for a long time in a highly dependable manner despite the harsh operating conditions in automotive applications. Dependability represents the reliance that a user justifiably poses on the service offered by a system, being this especially important in safety-critical applications in which a failure can constitute a threat to people or the environment. An Anisotropic Magnetoresistance (AMR) sensor is a type of magnetic sensor often used for angle measurements in cars. This sensor is affected by performance degradation and catastrophic faults that in principle cause the sensor to stop working suddenly. Therefore, the sensor dependability should be improved in order to guarantee that it will satisfy the continuous increasing dependability as well as accuracy requirements demanded by automotive applications. This research proposes an AMR sensor system that includes a fault-tolerant approach to handle catastrophic faults and self-X properties to maintain the performance of the sensor during its lifetime. Additionally, an interface with the IEEE 1687 standard has been considered, so the sensor is able to communicate with other components of the system in which it is integrated

Study of fault-tolerant software technology

Presented is an overview of the current state of the art of fault-tolerant software and an analysis of quantitative techniques and models developed to assess its impact. It examines research efforts as well as experience gained from commercial application of these techniques. The paper also addresses the computer architecture and design implications on hardware, operating systems and programming languages (including Ada) of using fault-tolerant software in real-time aerospace applications. It concludes that fault-tolerant software has progressed beyond the pure research state. The paper also finds that, although not perfectly matched, newer architectural and language capabilities provide many of the notations and functions needed to effectively and efficiently implement software fault-tolerance

Fault tolerant programmable digital attitude control electronics study

The attitude control electronics mechanization study to develop a fault tolerant autonomous concept for a three axis system is reported. Programmable digital electronics are compared to general purpose digital computers. The requirements, constraints, and tradeoffs are discussed. It is concluded that: (1) general fault tolerance can be achieved relatively economically, (2) recovery times of less than one second can be obtained, (3) the number of faulty behavior patterns must be limited, and (4) adjoined processes are the best indicators of faulty operation

Fault-tolerant computer study

A set of building block circuits is described which can be used with commercially available microprocessors and memories to implement fault tolerant distributed computer systems. Each building block circuit is intended for VLSI implementation as a single chip. Several building blocks and associated processor and memory chips form a self checking computer module with self contained input output and interfaces to redundant communications buses. Fault tolerance is achieved by connecting self checking computer modules into a redundant network in which backup buses and computer modules are provided to circumvent failures. The requirements and design methodology which led to the definition of the building block circuits are discussed

On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast