5,142 research outputs found
Design Aspects of An Energy-Efficient, Lightweight Medium Access Control Protocol for Wireless Sensor Networks
This document gives an overview of the most relevant design aspects of the lightweight medium access control (LMAC) protocol [16] for wireless sensor networks (WSNs). These aspects include selfconfiguring and localized operation of the protocol, time synchronization in multi-hop networks, network setup and strategies to reduce latency.\ud
The main goal in designing a MAC protocol for WSNs is to minimize energy waste - due to collisions of messages and idle listening - , while limiting latency and loss of data throughput. It is shown that the LMAC protocol performs well on energy-efficiency and delivery ratio [19] and can\ud
ensure a long-lived, self-configuring network of battery-powered wireless sensors.\ud
The protocol is based upon scheduled access, in which each node periodically gets a time slot, during which it is allowed to transmit. The protocol does not depend on central managers to assign time slots to nodes.\ud
WSNs are assumed to be multi-hop networks, which allows for spatial reuse of time slots, just like frequency reuse in GSM cells. In this document, we present a distributed algorithm that allows nodes to find unoccupied time slots, which can be used without causing collision or interference to other nodes. Each node takes one time slot in control to\ud
carry out its data transmissions. Latency is affected by the actual choice of controlled time slot. We present time slot choosing strategies, which ensure a low latency for the most common data traffic in WSNs: reporting of sensor readings to central sinks
RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks
Protocols developed during the last years for Wireless Sensor Networks (WSNs)
are mainly focused on energy efficiency and autonomous mechanisms (e.g.
self-organization, self-configuration, etc). Nevertheless, with new WSN
applications, appear new QoS requirements such as time constraints. Real-time
applications require the packets to be delivered before a known time bound
which depends on the application requirements. We particularly focus on
applications which consist in alarms sent to the sink node. We propose
Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the
best of our knowledge, RTXP is the first MAC and routing real-time
communication protocol that is not centralized, but instead relies only on
local information. The solution is cross-layer (X-layer) because it allows to
control the delays due to MAC and Routing layers interactions. RTXP uses a
suited hop-count-based Virtual Coordinate System which allows deterministic
medium access and forwarder selection. In this paper we describe the protocol
mechanisms. We give theoretical bound on the end-to-end delay and the capacity
of the protocol. Intensive simulation results confirm the theoretical
predictions and allow to compare with a real-time centralized solution. RTXP is
also simulated under harsh radio channel, in this case the radio link
introduces probabilistic behavior. Nevertheless, we show that RTXP it performs
better than a non-deterministic solution. It thus advocates for the usefulness
of designing real-time (deterministic) protocols even for highly unreliable
networks such as WSNs
Analyzing Delay in Wireless Multi-hop Heterogeneous Body Area Networks
With increase in ageing population, health care market keeps growing. There
is a need for monitoring of health issues. Wireless Body Area Network (WBAN)
consists of wireless sensors attached on or inside human body for monitoring
vital health related problems e.g, Electro Cardiogram (ECG), Electro
Encephalogram (EEG), ElectronyStagmography (ENG) etc. Due to life threatening
situations, timely sending of data is essential. For data to reach health care
center, there must be a proper way of sending data through reliable connection
and with minimum delay. In this paper transmission delay of different paths,
through which data is sent from sensor to health care center over heterogeneous
multi-hop wireless channel is analyzed. Data of medical related diseases is
sent through three different paths. In all three paths, data from sensors first
reaches ZigBee, which is the common link in all three paths. Wireless Local
Area Network (WLAN), Worldwide Interoperability for Microwave Access (WiMAX),
Universal Mobile Telecommunication System (UMTS) are connected with ZigBee.
Each network (WLAN, WiMAX, UMTS) is setup according to environmental
conditions, suitability of device and availability of structure for that
device. Data from these networks is sent to IP-Cloud, which is further
connected to health care center. Delay of data reaching each device is
calculated and represented graphically. Main aim of this paper is to calculate
delay of each link in each path over multi-hop wireless channel.Comment: arXiv admin note: substantial text overlap with arXiv:1208.240
Maximum Multipath Routing Throughput in Multirate Wireless Mesh Networks
In this paper, we consider the problem of finding the maximum routing
throughput between any pair of nodes in an arbitrary multirate wireless mesh
network (WMN) using multiple paths. Multipath routing is an efficient technique
to maximize routing throughput in WMN, however maximizing multipath routing
throughput is a NP-complete problem due to the shared medium for
electromagnetic wave transmission in wireless channel, inducing collision-free
scheduling as part of the optimization problem. In this work, we first provide
problem formulation that incorporates collision-free schedule, and then based
on this formulation we design an algorithm with search pruning that jointly
optimizes paths and transmission schedule. Though suboptimal, compared to the
known optimal single path flow, we demonstrate that an efficient multipath
routing scheme can increase the routing throughput by up to 100% for simple
WMNs.Comment: This paper has been accepted for publication in IEEE 80th Vehicular
Technology Conference, VTC-Fall 201
Recommended from our members
Common security issues and challenges in wireless sensor networks and IEEE 802.11 wireless mesh networks
Both Wireless Mesh Network (WMN) and Wireless Sensor Network (WSN) are multi-hop wireless networks. WMN is an emerging community based integrated broadband wireless network which ensures high bandwidth ubiquitous internet provision to users, while, WSN is application specific and ensures large scale real-time data processing in complex environment. Both these wireless networks have some common vulnerable features which may increase the chances of different sorts of security attacks. Wireless sensor nodes have computation, memory and power limitations, which do not allow for implementation of complex security mechanism. In this paper, we discuss the common limitations and vulnerable features of WMN and WSN, along with the associated security threats and possible countermeasures. We also propose security mechanisms keeping in view the architecture and limitations of both. This article will serve as a baseline guide for the new researchers who are concern with the security aspects of WMN and WSN
A Case for Time Slotted Channel Hopping for ICN in the IoT
Recent proposals to simplify the operation of the IoT include the use of
Information Centric Networking (ICN) paradigms. While this is promising,
several challenges remain. In this paper, our core contributions (a) leverage
ICN communication patterns to dynamically optimize the use of TSCH (Time
Slotted Channel Hopping), a wireless link layer technology increasingly popular
in the IoT, and (b) make IoT-style routing adaptive to names, resources, and
traffic patterns throughout the network--both without cross-layering. Through a
series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware,
we find that our approach is fully robust against wireless interference, and
almost halves the energy consumed for transmission when compared to CSMA. Most
importantly, our adaptive scheduling prevents the time-slotted MAC layer from
sacrificing throughput and delay
The Bus Goes Wireless: Routing-Free Data Collection with QoS Guarantees in Sensor Networks
Abstract—We present the low-power wireless bus (LWB), a new communication paradigm for QoS-aware data collection in lowpower sensor networks. The LWB maps all communication onto network floods by using Glossy, an efficient flooding architecture for wireless sensor networks. Therefore, unlike current solutions, the LWB requires no information of the network topology, and inherently supports networks with mobile nodes and multiple data sinks. A LWB prototype implemented in Contiki guarantees bounded end-to-end communication delay and duplicate-free, inorder packet delivery—key QoS requirements in many control and mission-critical applications. Experiments on two testbeds demonstrate that the LWB prototype outperforms state-of-theart data collection and link layer protocols, in terms of reliability and energy efficiency. For instance, we measure an average radio duty cycle of 1.69 % and an overall data yield of 99.97 % in a typical data collection scenario with 85 sensor nodes on Twist. I
- …