Radio wave propagation and single-cell coverage prediction of broadband radio access systems including passive reflectors, Journal of Telecommunications and Information Technology, 2001, nr 2

This paper presents the scheme of a software planing tool for single microcells of broadband radio access systems operating at millimeter waves, providing local multi- point distribution services (LMDS), particularly in urban or suburban areas. The aim of this planing tool is to provide operators with information, which supports the assessment of the profitability by calculating link budgets and the area coverage and by roughly estimating the maximum number of potential customers, i.e. the total number of households in a certain area, as well as the number of customers (house-holds) which will actually be covered from a site. A house-hold is here considered as a single apartment or flat, thus a building usually consists of several households. This novel household-estimation model is able to estimate the number of households based only on the 3D-data of buildings, without using residential data. Besides the optimization of line-of-sight (LOS) coverage, also the possibility is considered to enhance the coverage into shadowed areas by using optimized reflectors as passive repeaters up to distances of 1 km from the base station, depending on the system margin and the rain climate zone. All calculations are based on 3D-databases of both, buildings and vegetation

Journal of Telecommunications and Information Technology, 2001, nr 2

kwartalni

Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks

MmWave communications are expected to play a major role in the Fifth generation of mobile networks. They offer a potential multi-gigabit throughput and an ultra-low radio latency, but at the same time suffer from high isotropic pathloss, and a coverage area much smaller than the one of LTE macrocells. In order to address these issues, highly directional beamforming and a very high-density deployment of mmWave base stations were proposed. This Thesis aims to improve the reliability and performance of the 5G network by studying its tight and seamless integration with the current LTE cellular network. In particular, the LTE base stations can provide a coverage layer for 5G mobile terminals, because they operate on microWave frequencies, which are less sensitive to blockage and have a lower pathloss. This document is a copy of the Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight integration architecture, based on mobile terminals' dual connectivity to LTE and 5G radio access networks, and will evaluate which are the new network procedures that will be needed to support it. Moreover, this new architecture will be implemented in the ns-3 simulator, and a thorough simulation campaign will be conducted in order to evaluate its performance, with respect to the baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz

5G Outlook – Innovations and Applications

5G Outlook - Innovations and Applications is a collection of the recent research and development in the area of the Fifth Generation Mobile Technology (5G), the future of wireless communications. Plenty of novel ideas and knowledge of the 5G are presented in this book as well as divers applications from health science to business modeling. The authors of different chapters contributed from various countries and organizations. The chapters have also been presented at the 5th IEEE 5G Summit held in Aalborg on July 1, 2016. The book starts with a comprehensive introduction on 5G and its need and requirement. Then millimeter waves as a promising spectrum to 5G technology is discussed. The book continues with the novel and inspiring ideas for the future wireless communication usage and network. Further, some technical issues in signal processing and network design for 5G are presented. Finally, the book ends up with different applications of 5G in distinct areas. Topics widely covered in this book are: • 5G technology from past to present to the future• Millimeter- waves and their characteristics• Signal processing and network design issues for 5G• Applications, business modeling and several novel ideas for the future of 5

5G Outlook – Innovations and Applications

5G Outlook - Innovations and Applications is a collection of the recent research and development in the area of the Fifth Generation Mobile Technology (5G), the future of wireless communications. Plenty of novel ideas and knowledge of the 5G are presented in this book as well as divers applications from health science to business modeling. The authors of different chapters contributed from various countries and organizations. The chapters have also been presented at the 5th IEEE 5G Summit held in Aalborg on July 1, 2016. The book starts with a comprehensive introduction on 5G and its need and requirement. Then millimeter waves as a promising spectrum to 5G technology is discussed. The book continues with the novel and inspiring ideas for the future wireless communication usage and network. Further, some technical issues in signal processing and network design for 5G are presented. Finally, the book ends up with different applications of 5G in distinct areas. Topics widely covered in this book are: • 5G technology from past to present to the future• Millimeter- waves and their characteristics• Signal processing and network design issues for 5G• Applications, business modeling and several novel ideas for the future of 5

Space-Based Information Infrastructure Architecture for Broadband Services

This study addressed four tasks: (1) identify satellite-addressable information infrastructure markets; (2) perform network analysis for space-based information infrastructure; (3) develop conceptual architectures; and (4) economic assessment of architectures. The report concludes that satellites will have a major role in the national and global information infrastructure, requiring seamless integration between terrestrial and satellite networks. The proposed LEO, MEO, and GEO satellite systems have satellite characteristics that vary widely. They include delay, delay variations, poorer link quality and beam/satellite handover. The barriers against seamless interoperability between satellite and terrestrial networks are discussed. These barriers are the lack of compatible parameters, standards and protocols, which are presently being evaluated and reduced

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Human Body Scattering Effects at Millimeter Waves Frequencies for Future 5G Systems and Beyond

[ES] Se espera que las futuras comunicaciones móviles experimenten una revolución técnica que vaya más allá de las velocidades de datos de Gbps y reduzca las latencias de las velocidades de datos a niveles muy cercanos al milisegundo. Se han investigado nuevas tecnologías habilitadoras para lograr estas exigentes especificaciones. Y la utilización de las bandas de ondas milimétricas, donde hay mucho espectro disponible, es una de ellas. Debido a las numerosas dificultades técnicas asociadas a la utilización de esta banda de frecuencias, se necesitan complicados modelos de canal para anticipar las características del canal de radio y evaluar con precisión el rendimiento de los sistemas celulares en milimétricas. En concreto, los modelos de propagación más precisos son los basados en técnicas de trazado de rayos deterministas. Pero estas técnicas tienen el estigma de ser computacionalmente exigentes, y esto dificulta su uso para caracterizar el canal de radio en escenarios interiores complejos y dinámicos. La complejidad de la caracterización de estos escenarios depende en gran medida de la interacción del cuerpo humano con el entorno radioeléctrico, que en las ondas milimétricas suele ser destructiva y muy impredecible. Por otro lado, en los últimos años, la industria de los videojuegos ha desarrollado potentes herramientas para entornos hiperrealistas, donde la mayor parte de los avances en esta emulación de la realidad tienen que ver con el manejo de la luz. Así, los motores gráficos de estas plataformas se han vuelto cada vez más eficientes para manejar grandes volúmenes de información, por lo que son ideales para emular el comportamiento de la propagación de las ondas de radio, así como para reconstruir un escenario interior complejo. Por ello, en esta Tesis se ha aprovechado la capacidad computacional de este tipo de herramientas para evaluar el canal radioeléctrico milimétricas de la forma más eficiente posible. Esta Tesis ofrece unas pautas para optimizar la propagación de la señal en milimétricas en un entorno interior dinámico y complejo, para lo cual se proponen tres objetivos principales. El primer objetivo es evaluar los efectos de dispersión del cuerpo humano cuando interactúa con el canal de propagación. Una vez evaluado, se propuso un modelo matemático y geométrico simplificado para calcular este efecto de forma fiable y rápida. Otro objetivo fue el diseño de un reflector pasivo modular en milimétricas, que optimiza la cobertura en entornos de interior, evitando la interferencia del ser humano en la propagación. Y, por último, se diseñó un sistema de apuntamiento del haz predictivo en tiempo real, para que opere con el sistema de radiación en milimétricas, cuyo objetivo es evitar las pérdidas de propagación causadas por el cuerpo humano en entornos interiores dinámicos y complejos.[CA] S'espera que les futures comunicacions mòbils experimenten una revolució tècnica que vaja més enllà de les velocitats de dades de Gbps i reduïsca les latències de les velocitats de dades a nivells molt pròxims al milisegundo. S'han investigat noves tecnologies habilitadoras per a aconseguir estes exigents especificacions. I la utilització de les bandes d'ones millimètriques, on hi ha molt espectre disponible, és una d'elles. A causa de les nombroses dificultats tècniques associades a la utilització d'esta banda de freqüències, es necessiten complicats models de canal per a anticipar les característiques del canal de ràdio i avaluar amb precisió el rendiment dels sistemes cellulars en millimètriques. En concret, els models de propagació més precisos són els basats en tècniques de traçat de rajos deterministes. Però estes tècniques tenen l'estigma de ser computacionalment exigents, i açò dificulta el seu ús per a caracteritzar el canal de ràdio en escenaris interiors complexos i dinàmics. La complexitat de la caracterització d'estos escenaris depén en gran manera de la interacció del cos humà amb l'entorn radioelèctric, que en les ones millimètriques sol ser destructiva i molt impredicible. D'altra banda, en els últims anys, la indústria dels videojocs ha desenrotllat potents ferramentes per a entorns hiperrealistes, on la major part dels avanços en esta emulació de la realitat tenen a veure amb el maneig de la llum. Així, els motors gràfics d'estes plataformes s'han tornat cada vegada més eficients per a manejar grans volums d'informació, per la qual cosa són ideals per a emular el comportament de la propagació de les ones de ràdio, així com per a reconstruir un escenari interior complex. Per això, en esta Tesi s'ha aprofitat la capacitat computacional d'este tipus de ferramentes per a avaluar el canal radioelèctric millimètriques de la manera més eficient possible. Esta Tesi oferix unes pautes per a optimitzar la propagació del senyal en millimètriques en un entorn interior dinàmic i complex, per a la qual cosa es proposen tres objectius principals. El primer objectiu és avaluar els efectes de dispersió del cos humà quan interactua amb el canal de propagació. Una vegada avaluat, es va proposar un model matemàtic i geomètric simplificat per a calcular este efecte de forma fiable i ràpida. Un altre objectiu va ser el disseny d'un reflector passiu modular en millimètriques, que optimitza la cobertura en entorns d'interior, evitant la interferència del ser humà en la propagació, per a així evitar pèrdues de propagació addicionals. I, finalment, es va dissenyar un sistema d'apuntament del feix predictiu en temps real, perquè opere amb el sistema de radiació en millimètriques, l'objectiu del qual és evitar les pèrdues de propagació causades pel cos humà en entorns interiors dinàmics i complexos.[EN] Future mobile communications are expected to experience a technical revolution that goes beyond Gbps data rates and reduces data rate latencies to levels very close to a millisecond. New enabling technologies have been researched to achieve these demanding specifications. The utilization of mmWave bands, where a lot of spectrum is available, is one of them. Due to the numerous technical difficulties associated with using this frequency band, complicated channel models are necessary to anticipate the radio channel characteristics and to accurately evaluate the performance of cellular systems in mmWave. In particular, the most accurate propagation models are those based on deterministic ray tracing techniques. But these techniques have the stigma of being computationally intensive, and this makes it difficult to use them to characterize the radio channel in complex and dynamic indoor scenarios. The complexity of characterizing these scenarios depends largely on the interaction of the human body with the radio environment, which at mmWaves is often destructive and highly unpredictable. On the other hand, in recent years, the video game industry has developed powerful tools for hyper-realistic environments, where most of the progress in this reality emulation has to do with the handling of light. Therefore, the graphic engines of these platforms have become more and more efficient to handle large volumes of information, becoming ideal to emulate the radio wave propagation behavior, as well as to reconstruct a complex interior scenario. Therefore, in this Thesis one has taken advantage of the computational capacity of this type of tools to evaluate the mmWave radio channel in the most efficient way possible. This Thesis offers some guidelines to optimize the signal propagation in mmWaves in a dynamic and complex indoor environment, for which three main objectives are proposed. The first objective has been to evaluate the scattering effects of the human body when it interacts with the propagation channel. Once evaluated, a simplified mathematical and geometrical model has been proposed to calculate this effect in a reliable and fast way. Another objective has been the design of a modular passive reflector in mmWaves, which optimizes the coverage in indoor environments, avoiding human interference in the propagation, in order to avoid its harmful scattering effects. And finally, a real-time predictive beam steering system has been designed for the mmWaves radiation system, in order to avoid propagation losses caused by the human body in dynamic and complex indoor environments.Romero Peña, JS. (2022). Human Body Scattering Effects at Millimeter Waves Frequencies for Future 5G Systems and Beyond [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19132