Linearization of The Timing Analysis and Optimization of Level-Sensitive Circuits

This thesis describes a linear programming (LP) formulation applicable to the static timing analysis of large scale synchronous circuits with level-sensitive latches. The automatic timing analysis procedure presented here is composed of deriving the connectivity information, constructing the LP model and solving the clock period minimization problem of synchronous digital VLSI circuits. In synchronous circuits with level-sensitive latches, operation at a reduced clock period (higher clock frequency) is possible by takingadvantage of both non-zero clock skew scheduling and time borrowing. Clock skew schedulingis performed in order to exploit the benefits of nonidentical clock signal delays on circuit timing. The time borrowing property of level-sensitive circuits permits higher operating frequencies compared to edge-sensitivecircuits. Considering time borrowing in the timing analysis, however, introduces non-linearity in this timing analysis. The modified big M (MBM) method is defined in order to transform the non-linear constraints arising in the problem formulation into solvable linear constraints. Equivalent LP model problemsfor single-phase clock synchronization of the ISCAS'89 benchmark circuits are generated and these problems are solved by the industrial LP solver CPLEX. Through the simultaneous application of time borrowing and clock skew scheduling, up to 63% improvements are demonstrated in minimum clock period with respect to zero-skew edge-sensitive synchronous circuits. The timing constraints governing thelevel-sensitive synchronous circuit operation not only solve the clock period minimization problem but also provide a common framework for the general timing analysis of such circuits. The inclusion of additional constraints into the problem formulation in order to meet the timing requirements imposed by specific applicationenvironments is discussed

Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed

Two-phase RTD-CMOS pipelined circuits

MOnostable-BIstable Logic Element (MOBILE) networks can be operated in a gate-level pipelined fashion (nanopipeline) allowing high through output. Resonant tunneling diode (RTD)-based MOBILE nanopipelined circuits have been reported using different clock schemes including a four-phase strategy and a single-phase clock scheme. In particular, significant power advantages of single-phase RTD-CMOS MOBILE circuits over pure CMOS have been shown. This letter compares the RTD-CMOS realizations using a single clock and a novel two-phase clock solution. Significant superior robustness and performance in terms of power and area are obtained for the two-phase implementations

Desynchronization: Synthesis of asynchronous circuits from synchronous specifications

Asynchronous implementation techniques, which measure logic delays at run time and activate registers accordingly, are inherently more robust than their synchronous counterparts, which estimate worst-case delays at design time, and constrain the clock cycle accordingly. De-synchronization is a new paradigm to automate the design of asynchronous circuits from synchronous specifications, thus permitting widespread adoption of asynchronicity, without requiring special design skills or tools. In this paper, we first of all study different protocols for de-synchronization and formally prove their correctness, using techniques originally developed for distributed deployment of synchronous language specifications. We also provide a taxonomy of existing protocols for asynchronous latch controllers, covering in particular the four-phase handshake protocols devised in the literature for micro-pipelines. We then propose a new controller which exhibits provably maximal concurrency, and analyze the performance of desynchronized circuits with respect to the original synchronous optimized implementation. We finally prove the feasibility and effectiveness of our approach, by showing its application to a set of real designs, including a complete implementation of the DLX microprocessor architectur

Fast algorithms for retiming large digital circuits

The increasing complexity of VLSI systems and shrinking time to market requirements demand good optimization tools capable of handling large circuits. Retiming is a powerful transformation that preserves functionality, and can be used to optimize sequential circuits for a wide range of objective functions by judiciously relocating the memory elements. Leiserson and Saxe, who introduced the concept, presented algorithms for period optimization (minperiod retiming) and area optimization (minarea retiming). The ASTRA algorithm proposed an alternative view of retiming using the equivalence between retiming and clock skew optimization;The first part of this thesis defines the relationship between the Leiserson-Saxe and the ASTRA approaches and utilizes it for efficient minarea retiming of large circuits. The new algorithm, Minaret, uses the same linear program formulation as the Leiserson-Saxe approach. The underlying philosophy of the ASTRA approach is incorporated to reduce the number of variables and constraints in this linear program. This allows minarea retiming of circuits with over 56,000 gates in under fifteen minutes;The movement of flip-flops in control logic changes the state encoding of finite state machines, requiring the preservation of initial (reset) states. In the next part of this work the problem of minimizing the number of flip-flops in control logic subject to a specified clock period and with the guarantee of an equivalent initial state, is formulated as a mixed integer linear program. Bounds on the retiming variables are used to guarantee an equivalent initial state in the retimed circuit. These bounds lead to a simple method for calculating an equivalent initial state for the retimed circuit;The transparent nature of level sensitive latches enables level-clocked circuits to operate faster and require less area. However, this transparency makes the operation of level-clocked circuits very complex, and optimization of level-clocked circuits is a difficult task. This thesis also presents efficient algorithms for retiming large level-clocked circuits. The relationship between retiming and clock skew optimization for level-clocked circuits is defined and utilized to develop efficient retiming algorithms for period and area optimization. Using these algorithms a circuit with 56,000 gates could be retimed for minimum period in under twenty seconds and for minimum area in under 1.5 hours

Effects of buffer insertion on the average/peak power ratio in CMOS VLSI digital circuits

The buffer insertion has been a mechanism widely used to increase the performances of advanced VLSI digital circuits and systems. The driver or repeater used to this purpose has effect on the timing characteristics on the signal on the wire, as propagation delay, signal integrity, transition time, among others. The power concerns related to buffering have also received much attention, because of the low power requirements of modern integrated systems. In the same way, the buffer insertion has strong impact on the reliability of synchronous systems, since the suited distribution of clock requires reduced or controlled clock-skew, being the buffer and wire sizing, a crucial aspect. In a different way, buffer insertion has been also used to reduce noise generation, especially in heavily loaded nets, since the inclusion of buffers help to desynchronize signal transitions. However, the inclusion of buffers of inverters to improve one or more of these characteristics have often negative effect on another parameters, as it happens in the average and peak of supply current. Mainly, the inclusion of a buffer to reduce noise (peak power), via desynchronizing transitions, could introduce more dynamic consumption, but reducing the short-circuit current because of the increment of signal slope. Thus, the average/peak current optimization can be considered a design trade-off. In this paper, the mechanism to obtain an average/peak power optimization procedure are presented. Selected examples show the feasibility of minimizing switching noise with negligible impact on average power consumption.MEC TEC2004-01509 DOCJunta de Andalucía TIC2006-635 Project

Zero skew clock routing for fast clock tree generation

A Zero Skew Clock Routing Methodology has been developed to help design team speed up their clock tree generation process. The methodology works by breaking up the clock net into smaller partitions, then inserting clock buffers to drive each portion, and lastly, routing the connection from original clock source to each newly inserted clock buffers with zero skew. A few Perl scripts and a new Visual Basic based routing tool have been developed to support the methodology implementation. The routing algorithm used in this tool is based on the Exact Zero Skew Routing Algorithm. The methodology has been tested using a real design database and resulting in a significant improvement in the through put time required to complete the clock tree generation. This improvement is attributed to the ability to generate clock tree on much smaller portions of clock nets that supports of speeding up the clock tree generation process in IC design

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era