A new charging scheme for ATM based on QoS

PhDNew services are emerging rapidly within the world of telecommunications. Charging strategies that were appropriate for individual transfer capabilities are no longer appropriate for an integrated broadband communications network. There is currently a range of technologies (such as cable television, telephony and narrow band ISDN) for the different services in use and a limited number of charging schemes are applicable for each of the underlying technologies irrespective of the services used over it. Difficulties arise when a wide range of services has to be supported on the same integrated technology such as asynchronous transfer mode (ATM); in such cases the type of service in use and the impact it has on the network becomes much more important. The subject of this thesis, therefore, is the charging strategies for integrated broadband communications networks. That is, the identification of the requirements associated with ATM charging schemes and the proposal of a new approach to charging for ATM called the “quality of service based charging scheme”. Charging for ATM is influenced by three important components: the type and content of a service being offered; the type of customer using the services; and the traffic characteristics belonging to the application supporting the services. The first two issues will largely be dependent on the business and regulatory requirements of the operators. The last item, and an essential one for ATM, is the bridge between technology and business; how are the resources used by a service quantified? Charging that is based on resource usage at the network level was the prime focus of the research reported here. With the proposed charging scheme, a distinction is first made between the four different ATM transfer capabilities that will support various services and the different quality of service requirements that may be applicable to each of them. Then, resources are distributed among buffers set-up to support the combination of these transfer capabilities and quality of services. The buffers are dimensioned according to the M/D/1/K and the ND/D/1 queuing analysis to determine the buffer efficiency and quality of service requirements. This dimensioning provides the basis for fixing the price per unit of resource and time. The actual resource used by a connection is based on the volume of cells transmitted or peak cell rate allocation in combination with traffic shapers if appropriate. Shapers are also dimensioned using the quality of service parameters. Since the buffer 4 efficiency is dependent on the quality of service requirements, users (customers) of ATM networks buy quality of service. The actual price of a connection is further subjected to a number of transformations based on the size of the resource purchased, the time of the day at which a connection is made, and the geographical locality of the destination switch. It is demonstrated that the proposed charging scheme meets all the requirements of customers and of network operators. In addition the result of the comparison of the new scheme with a number of existing, prominent, ATM charging schemes is presented, showing that the performance of the proposed scheme is better in terms of meeting the expectations of both the customers and the network operators

Implementation of charging schemes to transport and service level ATM networks

Nowadays, telecommunications networks like telephony networks, computer networks, and packet switched networks are all dedicated to only one or just a few types of services When a user wants to subscribe to various telecommunications services, he needs to be connected to different types of networks, which raises the cost of connection, and reduces the efficiency of the utilisation of the network

Joint buffer management and scheduling for input queued switches

Input queued (IQ) switches are highly scalable and they have been the focus of many studies from academia and industry. Many scheduling algorithms have been proposed for IQ switches. However, they do not consider the buffer space requirement inside an IQ switch that may render the scheduling algorithms inefficient in practical applications. In this dissertation, the Queue Length Proportional (QLP) algorithm is proposed for IQ switches. QLP considers both the buffer management and the scheduling mechanism to obtain the optimal allocation region for both bandwidth and buffer space according to real traffic load. In addition, this dissertation introduces the Queue Proportional Fairness (QPF) criterion, which employs the cell loss ratio as the fairness metric. The research in this dissertation will show that the utilization of network resources will be improved significantly with QPF. Furthermore, to support diverse Quality of Service (QoS) requirements of heterogeneous and bursty traffic, the Weighted Minmax algorithm (WMinmax) is proposed to efficiently and dynamically allocate network resources. Lastly, to support traffic with multiple priorities and also to handle the decouple problem in practice, this dissertation introduces the multiple dimension scheduling algorithm which aims to find the optimal scheduling region in the multiple Euclidean space

On the effective bandwidth for resource management in ATM networks

Ankara : Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 1997.Thesis (Master's) -- Bilkent University, 1997.Includes bibliographical references leaves 81-84.Chahed, TijaniM.S

Internet Resource Management and Pricing

Originally conceived and funded as a research project, the Internet has grown into a commercial, global and integrated service network. This has changed the nature of traffic on the Internet with the increasing use of things like video conferencing and time critical transactions. These forms of Internet usage place high demands on bandwidth. Added to this is the fact that the number of users is increasing at a dramatic rate and shows no signs of slowing. This is leading to a \u27tragedy of the commons\u27 where endemic congestion will reduce the value of the Internet to everyone. It also implies the introduction of some form of quality of service (QoS) to differentiate time critical traffic from less time critical traffic. Pricing usage has been shown to be effective in controlling congestion by promoting more effective resource allocation. To provide the necessary QoS, there is an argument that simply increasing the available bandwidth will achieve this, while at the same time maintaining the simple model of the current Internet. However, there is also an argument that a more complex model may be needed that provides various levels of QoS with an associated pricing scheme to manage usage of these levels of QoS. A major part of the debate on this subject surrounds the trade-off between efficiency, economics and complexity that exists in introducing QoS and pricing to the Internet. This document discusses some of these issues, presents some of the current proposals for pricing Internet usage and finally compares the presented pricing proposals

Resource allocation in ATM networks

The areas of resource allocation ancl congestion control in ATM networks have been investigated. ATM networks and the guarantees given to users have been reviewed and a new model of ATM networking has been proposed. To aid the analysis of ATM network issues, performance modelling and simulation methods have been reviewed. Typical sources have been designed : a two-state Markov model for voice ; a multi-state Markov one layer variable bit rate video source model ; an empirical file transfer data source model ; and some basic network elements. The models have been verified and validated on a discrete event simulator. It was shown that there are problems when using ATM over satellite links. A model for the noise analysed from real satellite links was developed. Based on this model a new more efficient protocol for assembling ATM cells was proposed and simulated. Again at the cell level, the traffic that can pass the standardised conformance test and still produce the worst performance in the network was investigated. Counter to the traditional wisdom it was found that the on-off source does not always produce the worst case traffic. Users have been classified with new parameters, and it has been shown that these new classes of users can still be given guarantees without giving traffic descriptors. Adaptive user classes have been modelled mathematically. A new model for efficiency has been developed, which includes both network issues and economic issues. This new model defines congestion and also describes how to allocate resources when congested. It has been shown that this economic model coupled with the adaptive user classes allow for an increase in both network and economic efficiency simultaneously for some sample cases

A Slotted Ring Test Bed for the Study of ATM Network Congestion Management

This thesis addresses issues raised by the proposed Broadband Integrated Services Digital Network which will provide a flexible combination of integrated services traffic through its cell-based Asynchronbus Transport Mode (ATM). The introduction of a cell-based, connection-oriented, transport mode brings with it new technical challenges for network management. The routing of cells, their service at switching centres, and problems of cell congestion not encountered in the existing network, are some of the key issues. The thesis describes the development of a hardware slotted ring testbed for the investigation of congestion management in an ATM network. The testbed is designed to incorporate a modified form of the ORWELL protocol to control media access. The media access protocol is analysed to give a model for maximum throughput and reset interval under various traffic distributions. The results from the models are compared with measurements carried out on the testbed, where cell arrival statistics are also varied. It is shown that the maximum throughput of the testbed is dependent on both traffic distribution and cell arrival statistics. The testbed is used for investigations in a heterogeneous traffic environment where two classes of traffic with different cell arrival statistics and quality of service requirements are defined. The effect of prioritisation, media access protocol, traffic intensity, and traffic source statistics were investigated by determining an Admissible Load Region (ALR) for a network station. Conclusions drawn from this work suggest that there are many problems associated with the reliable definition of an ALR because of the number of variable parameters which could shift the ALR boundary. A suggested direction for further work is to explore bandwidth reservation and the concept of equivalent capacity of a connection, and how this can be linked to source control parameters

Dynamic bandwidth allocation in multi-class IP networks using utility functions.

PhDAbstact not availableFujitsu Telecommunications Europe Lt

3G migration in Pakistan

The telecommunication industry in Pakistan has come a long way since the country\u27s independence in 1947. The initial era could be fairly termed as the PTCL (Pakistan Telecommunication Company Limited) monopoly, for it was the sole provider of all telecommunication services across the country. It was not until four decades later that the region embarked into the new world of wireless communication, hence ending the decades old PTCL monopoly. By the end of the late 1990\u27s, government support and international investment in the region opened new doors to innovation and better quality, low cost, healthy competition. Wireless licenses for the private sector in the telecommunication industry triggered a promising chain of events that resulted in a drastic change in the telecommunication infrastructure and service profile. The newly introduced wireless (GSM) technology received enormous support from all stakeholders (consumers, regulatory body, and market) and caused a vital boost in Pakistan\u27s economy. Numerous tangential elements had triggered this vital move in the history of telecommunications in Pakistan. Entrepreneurs intended to test the idea of global joint ventures in the East and hence the idea of international business became a reality. The technology had proven to be a great success in the West, while Pakistan\u27s telecom consumer had lived under the shadow of PTCL dominance for decades and needed more flexibility. At last the world was moving from wired to wireless! Analysts termed this move as the beginning of a new era. The investors, telecommunication businesses, and Pakistani treasury prospered. It was a win-win situation for all involved. The learning curve was steep for both operators and consumers but certainly improved over time. In essence, the principle of deploying the right technology in the right market at the right time led to this remarkable success. The industry today stands on the brink of a similar crossroads via transition from second generation to something beyond. With the partial success of 3G in Europe and the USA, the government has announced the release of three 3G licenses by mid 2009. This decision is not yet fully supported by all but still initiated parallel efforts by the operators and the vendors to integrate this next move into their existing infrastructure

Wireless Communications: Myths and Reality

The use of wireless communications and computing is growing quickly, and wireless technologies are an active area of research and application. Many myths exist about different aspects of wireless computing. The purpose of this article is to examine the more prominent popular beliefs in this area. We address these beliefs using a framework consisting of three dimensions: technology, business, and society. For technology, wireless\u27 limited bandwidth and its effect on new wireless applications and services are discussed. For business, the anticipated revenue opportunities of Wi-Fi and mobile e-commerce are addressed. For society, issues of wireless security and its effect on wireless adoption are examined. Based on these examinations, we propose research directions along each dimension