Analysis of the Local Quasi-Stationarity of Measured Dual-Polarized MIMO Channels

It is common practice in wireless communications to assume strict or wide-sense stationarity of the wireless channel in time and frequency. While this approximation has some physical justification, it is only valid inside certain time-frequency regions. This paper presents an elaborate characterization of the non-stationarity of wireless dual-polarized channels in time. The evaluation is based on urban macrocell measurements performed at 2.53 GHz. In order to define local quasi-stationarity (LQS) regions, i.e., regions in which the change of certain channel statistics is deemed insignificant, we resort to the performance degradation of selected algorithms specific to channel estimation and beamforming. Additionally, we compare our results to commonly used measures in the literature. We find that the polarization, the antenna spacing, and the opening angle of the antennas into the propagation channel can strongly influence the non-stationarity of the observed channel. The obtained LQS regions can be of significant size, i.e., several meters, and thus the reuse of channel statistics over large distances is meaningful (in an average sense) for certain algorithms. Furthermore, we conclude that, from a system perspective, a proper non-stationarity analysis should be based on the considered algorithm

Max-SINR Receiver for HMCT Systems over Non-Stationary Doubly Dispersive Channel

In this paper, a maximizing Signal-to-Interference plus-Noise Ratio (Max-SINR) receiver for Hexagonal Multicarrier Transmission (HMCT) system over non-stationary doubly dispersive (NSDD) channel is proposed. The closed-form timing offset expression of the prototype pulse for the proposed Max-SINR HMCT receiver over NSDD channel is derived. Simulation results show that the proposed Max-SINR receiver outperforms traditional projection scheme and obtains an approximation to the theoretical upper bound SINR performance within all the local stationarity regions (LSRs). Meanwhile, the SINR performance of the proposed Max-SINR HMCT receiver is robust to the estimation error between the estimated value and the real value of root mean square (RMS) delay spread.Comment: This paper has been accepted by URSI GASS 2014 and will be presented in the proceeding of URSI GASS 201

Code-aided iterative techniques in OFDM systems

Inspired by the 'turbo principle', this thesis deals with two iterative technologies in orthogonal frequency division multiplexing (OFDM) systems: iterative interference cancelation in space-frequency block coded OFDM (SFBC-OFDM) and iterative channel estimation/ tracking in OFDM Access (OFDMA) with particular application to Worldwide Inter-operability for Microwave Access (WiMAX) systems. The linear matched filter (MF) decoding in SFBC-OFDM is simple yet obtains maximumlikelihood (ML) performance based on the assumption that the channel frequency response remains constant within a block. However, frequency response variations gives rise to inter-channel interference (lCI). In this thesis, a parallel interference cancelation (PIC) approach with soft iterations will be proposed to iteratively eliminate ICI in G4 SFBC-OFDM. Furthermore, the information from outer convolutional decoder is exploited and fed back to aid the inner PIC process to generate more accurate coded bits for the convolutional decoder. Therefore, inner and outer iterations work in a collaborative way to enhance the performance of interference cancelation. Code-aided iterative channel estimation/tracking has the ability of efficiently improving the quality of estimation/tracking without using additional pilots/training symbols. This technique is particularly applied to OFDMA physical layer ofWiMAX systems according to the Institute of Electrical and Electronics Engineers (IEEE) 802.16 standard. It will be demonstrated that the performance of the pilot-based channel estimation in uplink (UL) transmission and the channel tracking based on the preamble symbol in downlink (DL) transmission can be improved by iterating between the estimator and the detector the useful information from the outer convolutional codes. The above two issues will be discussed in Chapter 5 and Chapter 6, and before this, Chapter 2 to Chapter 4 will introduce some background techniques that are used throughout the thesis

An analysis of environment, microphone and data simulation mismatches in robust speech recognition

Speech enhancement and automatic speech recognition (ASR) are most often evaluated in matched (or multi-condition) settings where the acoustic conditions of the training data match (or cover) those of the test data. Few studies have systematically assessed the impact of acoustic mismatches between training and test data, especially concerning recent speech enhancement and state-of-the-art ASR techniques. In this article, we study this issue in the context of the CHiME- 3 dataset, which consists of sentences spoken by talkers situated in challenging noisy environments recorded using a 6-channel tablet based microphone array. We provide a critical analysis of the results published on this dataset for various signal enhancement, feature extraction, and ASR backend techniques and perform a number of new experiments in order to separately assess the impact of di↵erent noise environments, di↵erent numbers and positions of microphones, or simulated vs. real data on speech enhancement and ASR performance. We show that, with the exception of minimum variance distortionless response (MVDR) beamforming, most algorithms perform consistently on real and simulated data and can benefit from training on simulated data. We also find that training on di↵erent noise environments and di↵erent microphones barely a↵ects the ASR performance, especially when several environments are present in the training data: only the number of microphones has a significant impact. Based on these results, we introduce the CHiME-4 Speech Separation and Recognition Challenge, which revisits the CHiME-3 dataset and makes it more challenging by reducing the number of microphones available for testing

A widely linear multichannel Wiener Filter for wind prediction

The desire to improve short-term predictions of wind speed and direction has motivated the development of a spatial covariance-based predictor in a complex valued multichannel structure. Wind speed and direction are modeled as the magnitude and phase of complex time series and measurements from multiple geographic locations are embedded in a complex vector which is then used as input to a multichannel Wiener prediction filter. Building on a C-linear cyclo-stationary predictor, a new widely linear filter is developed and tested on hourly mean wind speed and direction measurements made at 13 locations in the UK over 6 years. The new predictor shows a reduction in mean squared error at all locations. Furthermore it is found that the scale of that reduction strongly depends on conditions local to the measurement site

Spatio-temporal prediction of wind fields

Short-term wind and wind power forecasts are required for the reliable and economic operation of power systems with significant wind power penetration. This thesis presents new statistical techniques for producing forecasts at multiple locations using spatiotemporal information. Forecast horizons of up to 6 hours are considered for which statistical methods outperform physical models in general. Several methods for producing hourly wind speed and direction forecasts from 1 to 6 hours ahead are presented in addition to a method for producing five-minute-ahead probabilistic wind power forecasts. The former have applications in areas such as energy trading and defining reserve requirements, and the latter in power system balancing and wind farm control. Spatio-temporal information is captured by vector autoregressive (VAR) models that incorporate wind direction by modelling the wind time series using complex numbers. In a further development, the VAR coefficients are replaced with coefficient functions in order to capture the dependence of the predictor on external variables, such as the time of year or wind direction. The complex-valued approach is found to produce accurate speed predictions, and the conditional predictors offer improved performance with little additional computational cost. Two non-linear algorithms have been developed for wind forecasting. In the first, the predictor is derived from an ensemble of particle swarm optimised candidate solutions. This approach is low cost and requires very little training data but fails to capitalise on spatial information. The second approach uses kernelised forms of popular linear algorithms which are shown to produce more accurate forecasts than their linear equivalents for multi-step-ahead prediction. Finally, very-short-term wind power forecasting is considered. Five-minute-ahead parametric probabilistic forecasts are produced by modelling the predictive distribution as logit-normal and forecasting its parameters using a sparse-VAR (sVAR) approach. Development of the sVAR is motivated by the desire to produce forecasts on a large spatial scale, i.e. hundreds of locations, which is critical during periods of high instantaneous wind penetration.Short-term wind and wind power forecasts are required for the reliable and economic operation of power systems with significant wind power penetration. This thesis presents new statistical techniques for producing forecasts at multiple locations using spatiotemporal information. Forecast horizons of up to 6 hours are considered for which statistical methods outperform physical models in general. Several methods for producing hourly wind speed and direction forecasts from 1 to 6 hours ahead are presented in addition to a method for producing five-minute-ahead probabilistic wind power forecasts. The former have applications in areas such as energy trading and defining reserve requirements, and the latter in power system balancing and wind farm control. Spatio-temporal information is captured by vector autoregressive (VAR) models that incorporate wind direction by modelling the wind time series using complex numbers. In a further development, the VAR coefficients are replaced with coefficient functions in order to capture the dependence of the predictor on external variables, such as the time of year or wind direction. The complex-valued approach is found to produce accurate speed predictions, and the conditional predictors offer improved performance with little additional computational cost. Two non-linear algorithms have been developed for wind forecasting. In the first, the predictor is derived from an ensemble of particle swarm optimised candidate solutions. This approach is low cost and requires very little training data but fails to capitalise on spatial information. The second approach uses kernelised forms of popular linear algorithms which are shown to produce more accurate forecasts than their linear equivalents for multi-step-ahead prediction. Finally, very-short-term wind power forecasting is considered. Five-minute-ahead parametric probabilistic forecasts are produced by modelling the predictive distribution as logit-normal and forecasting its parameters using a sparse-VAR (sVAR) approach. Development of the sVAR is motivated by the desire to produce forecasts on a large spatial scale, i.e. hundreds of locations, which is critical during periods of high instantaneous wind penetration

WAVEFORM AND TRANSCEIVER OPTIMIZATION FOR MULTI-FUNCTIONAL AIRBORNE RADAR THROUGH ADAPTIVE PROCESSING

Pulse compression techniques have been widely used for target detection and remote sensing. The primary concern for pulse compression is the sidelobe interference. Waveform design is an important method to improve the sidelobe performance. As a multi-functional aircraft platform in aviation safety domain, ADS-B system performs functions involving detection, localization and alerting of external traffic. In this work, a binary phase modulation is introduced to convert the original 1090 MHz ADS-B signal waveform into a radar signal. Both the statistical and deterministic models of new waveform are developed and analyzed. The waveform characterization, optimization and its application are studied in details. An alternative way to achieve low sidelobe levels without trading o range resolution and SNR is the adaptive pulse compression - RMMSE (Reiterative Minimum Mean-Square error). Theoretically, RMMSE is able to suppress the sidelobe level down to the receiver noise floor. However, the application of RMMSE to actual radars and the related implementation issues have not been investigated before. In this work, implementation aspects of RMMSE such as waveform sensitivity, noise immunity and computational complexity are addressed. Results generated by applying RMMSE to both simulated and measured radar data are presented and analyzed. Furthermore, a two-dimensional RMMSE algorithm is derived to mitigate the sidelobe effects from both pulse compression processing and antenna radiation pattern. In addition, to achieve even better control of the sidelobe level, a joint transmit and receive optimization scheme (JTRO) is proposed, which reduces the impacts of HPA nonlinearity and receiver distortion. Experiment results obtained with a Ku-band spaceborne radar transceiver testbed are presented