Explicit congestion control algorithms for available bit rate services in asynchronous transfer mode networks

Congestion control of available bit rate (ABR) services in asynchronous transfer mode (ATM) networks has been the recent focus of the ATM Forum. The focus of this dissertation is to study the impact of queueing disciplines on ABR service congestion control, and to develop an explicit rate control algorithm. Two queueing disciplines, namely, First-In-First-Out (FIFO) and per-VC (virtual connection) queueing, are examined. Performance in terms of fairness, throughput, cell loss rate, buffer size and network utilization are benchmarked via extensive simulations. Implementation complexity analysis and trade-offs associated with each queueing implementation are addressed. Contrary to the common belief, our investigation demonstrates that per-VC queueing, which is costlier and more complex, does not necessarily provide any significant improvement over simple FIFO queueing. A new ATM switch algorithm is proposed to complement the ABR congestion control standard. The algorithm is designed to work with the rate-based congestion control framework recently recommended by the ATM Forum for ABR services. The algorithm\u27s primary merits are fast convergence, high throughput, high link utilization, and small buffer requirements. Mathematical analysis is done to show that the algorithm converges to the max-min fair allocation rates in finite time, and the convergence time is proportional to the distinct number of fair allocations and the round-trip delays in the network. At the steady state, the algorithm operates without causing any oscillations in rates. The algorithm does not require any parameter tuning, and proves to be very robust in a large ATM network. The impact of ATM switching and ATM layer congestion control on the performance of TCP/IP traffic is studied and the results are presented. The study shows that ATM layer congestion control improves the performance of TCP/IP traffic over ATM, and implementing the proposed switch algorithm drastically reduces the required switch buffer requirements. In order to validate claims, many benchmark ATM networks are simulated, and the performance of the switch is evaluated in terms of fairness, link utilization, response time, and buffer size requirements. In terms of performance and complexity, the algorithm proposed here offers many advantages over other proposed algorithms in the literature

A simulation study on congestion control for the ATM ABR service

Ankara : Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 1997.Thesis (Master's) -- Bilkent University, 1997.Includes bibliographical references leaves 75-78.Ülkü, SezerM.S

TCP performance in ATM networks: ABR parameter tuning and ABR/UBR comparisons

This paper explores two issues on TOP performance over ATM networks: ABR parameter tuning and performance comparison of binary mode ABR with enhanced UBR services. Of the fifteen parameters defined for ABR, two parameters dominate binary mode ABR performance: Rate Increase Factor (RIF) and Rate Decrease Factor (RDF). Using simulations, we study the effects of these two parameters on TOP over ABR performance. We compare TOP performance with different ABR parameter settings in terms of through-puts and fairness. The effects of different buffer sizes and LAN/WAN distances are also examined. We then compare TOP performance with the best ABR parameter setting with corresponding UBR service enhanced with Early Packet Discard and also with a fair buffer allocation scheme. The results show that TOP performance over binary mode ABR is very sensitive to parameter value settings, and that a poor choice of parameters can result in ABR performance worse than that of the much less expensive UBR-EPD scheme

Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network. This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution. This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement

Traffic Management and Congestion Control in the ATM Network Model.

Asynchronous Transfer Mode (ATM) networking technology has been chosen by the International Telegraph and Telephony Consultative Committee (CCITT) for use on future local as well as wide area networks to handle traffic types of a wide range. It is a cell based network architecture that resembles circuit switched networks, providing Quality of Service (QoS) guarantees not normally found on data networks. Although the specifications for the architecture have been continuously evolving, traffic congestion management techniques for ATM networks have not been very well defined yet. This thesis studies the traffic management problem in detail, provides some theoretical understanding and presents a collection of techniques to handle the problem under various operating conditions. A detailed simulation of various ATM traffic types is carried out and the collected data is analyzed to gain an insight into congestion formation patterns. Problems that may arise during migration planning from legacy LANs to ATM technology are also considered. We present an algorithm to identify certain portions of the network that should be upgraded to ATM first. The concept of adaptive burn-in is introduced to help ease the computational costs involved in virtual circuit setup and tear down operations

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled