Channel sounding and indoor radio channel characteristics in the W-band

This work presents directional radio channel measurements in the W-band using a commercial versatile channel sounder based on a vector network analyzer (VNA), capable of measuring scattering parameters from 75 to 500 GHz with frequency converters. The commercial setup has been modified by increasing the distance for one of the converters using precision coaxial cables and avoiding the use of amplifiers. Firstly, initial distance-dependent single-input single-output (SISO) measurements of indoor radio channels are presented to assess the validity of the setup in the 75 110 GHz frequency band with highly directive horn antennas. Then, single-input multiple-output (SIMO) radio channels were measured at 94 GHz using one directional and one omnidirectional antenna mounted on two positioners. Initial channel characterization is presented comprising root mean square (rms) delay spread, rms angular spread, K-factor, and path loss in an indoor environment at 94 GHz.This work was supported by MINECO, Spain (TEC2013-47360-C3-2-P TEC2013-47360-C3-3-P) and by European FEDER funds.Martínez Inglés, M.; Gaillot, D.; Pascual-García, J.; Molina-García-Pardo, JM.; Rodriguez Rodriguez, JV.; Rubio Arjona, L.; Juan Llacer, L. (2016). Channel sounding and indoor radio channel characteristics in the W-band. EURASIP Journal on Wireless Communications and Networking. 30:1-8. doi:10.1186/s13638-016-0530-7S1830D Zico, Ultra-wideband and 60 GHz communications for biomedical applications. Springer. http://link.springer.com/book/10.1007%2F978-1-4614-8896-5 .L Jofre, J Romeu, S Capdevila, J Abril, E Nova, M Alonso, The “challenging” world of Terahertz radiation and imaging. Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP), 2011, pp. 3470–3475M Kawase, “Non-destructive evaluation method of pharmaceutical tablet by terahertz-time-domain spectroscopy: application to sound-alike medicines”, J. Infrared Millimeter Terahertz Waves, 34(9), 566–571KD Anderson, 94 GHz propagation in the evaporation duct. IEEE Trans. Antennas Propag. 38(5), 746–753 (1990)K Aydin, Y-M Lure, Millimeter wave scattering and propagation in rain: a computational study at 94 and 140 GHz for oblate spheroidal and spherical raindrops. IEEE Trans. Geosci. Remote Sens. 29(1), 593–601 (1991)C Gloaguen, An experiment for propagation studies at 94 GHz. Eighth Int. Conf. Antennas Propagation 1, 406–409 (1993)A Kajiwara, “Indoor propagation measurements at 94 GHz,” personal, indoor and mobile radio communications, 1995. Sixth IEEE Int. Symp PIMRC’95. Wireless Merging Inf. Superhighway 3, 1026 (1995)J Helminger, J Detlefsen, H Groll, Propagation properties of an indoor-channel at 94 GHz. Int. Conf. Microw Millimeter Wave Technol.Proc 98, 9–14 (1998)R Piesiewicz, R Geise, M Jacob, J Jemai, T Kurner, “Indoor channel measurements of point-to-point ultra broadband short range links between 75 GHz and 110 GHz”, in International Symposium Antennas and Propagation Society, 2008, pp. 1–4A Brizzi, A Pellegrini, Y Hao, “Experimental characterization of the propagation on the human torso at W band”, in Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI, 2013, p. 39K Haneda, J Järveläinen, A Karttunen, M Kyro, J Putkonen, Indoor short-range radio propagation measurements At 60 and 70 GHz, in EuCAP 2014, The Hague, The Netherlands, 2014, pp. 1–4S Promwong, J Takada, Free space link budget estimation scheme for ultra wideband impulse radio with imperfect antennas. IEICE Electronics Express 1(7), 188–192 (2004)NL Johnson, S Kotz, N Balakrishnan, Continuous univariate distributions, vol. 1 (Wiley-Interscience, Hoboken, 1993)A Richter, Estimation of radio channel parameters: models and algorithms (Dr.-Ing. dissertation, TU Ilmenau, Ilmenau, Germany, 2005

Small-scale distributions in an indoor environment at 94GHz

[EN] In this paper, an extensive multiple-input multiple-output measurement campaign in a lab environment has been conducted at the 94GHz band. Using a vector network analyzer, updown converters, and omnidirectional antennas displaced in virtual arrays, we have obtained an estimation of the distribution parameters for the most usual distributions employed in the small-scale fading modeling, i.e., Rayleigh, Rice, Nakagami-m and -, by using statistical inference techniques. Moreover, in this scenario the best fit distribution to the experimental data is the Weibull distribution, using the Kolmogorov-Smirnov test. However, the - distribution provides the best fitting to the experimental results in terms of the lower tails of the distributions.This work was supported by the Ministerio de Economia y Competitividad MINECO, Spain (TEC2016-78028-C3-2-P) and by the European FEDER funds. Further information regarding the data obtained and included in this paper can be attained by contacting the author, Jose M. Molina ([email protected]).Reig, J.; Martinez-Ingles, M.; Molina-Garcia-Pardo, J.; Rubio Arjona, L.; Rodrigo Peñarrocha, VM. (2017). Small-scale distributions in an indoor environment at 94GHz. Radio Science. 52(7):852-861. https://doi.org/10.1002/2017RS006335S852861527Cudak, M., Ghosh, A., Kovarik, T., Ratasuk, R., Thomas, T. A., Vook, F. W., & Moorut, P. (2013). Moving Towards Mmwave-Based Beyond-4G (B-4G) Technology. 2013 IEEE 77th Vehicular Technology Conference (VTC Spring). doi:10.1109/vtcspring.2013.6692638Everitt, B. S., & Skrondal, A. (2010). The Cambridge Dictionary of Statistics. doi:10.1017/cbo9780511779633Helminger, J., Detlefsen, J., & Groll, H. (s. f.). Propagation properties of an indoor-channel at 94 GHz. ICMMT’98. 1998 International Conference on Microwave and Millimeter Wave Technology. Proceedings (Cat. No.98EX106). doi:10.1109/icmmt.1998.768215Moon-Soon Choi, Grosskopf, G., & Rohde, D. (s. f.). Statistical Characteristics of 60 GHz Wideband Indoor Propagation Channel. 2005 IEEE 16th International Symposium on Personal, Indoor and Mobile Radio Communications. doi:10.1109/pimrc.2005.1651506Kajiwara, A. (s. f.). Indoor propagation measurements at 94 GHz. Proceedings of 6th International Symposium on Personal, Indoor and Mobile Radio Communications. doi:10.1109/pimrc.1995.477099Maccartney, G. R., Rappaport, T. S., Sun, S., & Deng, S. (2015). Indoor Office Wideband Millimeter-Wave Propagation Measurements and Channel Models at 28 and 73 GHz for Ultra-Dense 5G Wireless Networks. IEEE Access, 3, 2388-2424. doi:10.1109/access.2015.2486778Marcum J. I. 1950 Table of Q functionsMartinez-Ingles, M.-T., Gaillot, D. P., Pascual-Garcia, J., Molina-Garcia-Pardo, J.-M., Rodríguez, J.-V., Rubio, L., & Juan-Llácer, L. (2016). Channel sounding and indoor radio channel characteristics in the W-band. EURASIP Journal on Wireless Communications and Networking, 2016(1). doi:10.1186/s13638-016-0530-7Rangan, S., Rappaport, T. S., & Erkip, E. (2014). Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges. Proceedings of the IEEE, 102(3), 366-385. doi:10.1109/jproc.2014.2299397Reig, J., Martínez-Inglés, M.-T., Rubio, L., Rodrigo-Peñarrocha, V.-M., & Molina-García-Pardo, J.-M. (2014). Fading Evaluation in the 60 GHz Band in Line-of-Sight Conditions. International Journal of Antennas and Propagation, 2014, 1-12. doi:10.1155/2014/984102Thomas, H. J., Cole, R. S., & Siqueira, G. L. (1994). An experimental study of the propagation of 55 GHz millimeter waves in an urban mobile radio environment. IEEE Transactions on Vehicular Technology, 43(1), 140-146. doi:10.1109/25.282274Thomas, T. A., Vook, F. W., & Sun, S. (2015). Investigation into the effects of polarization in the indoor mmWave environment. 2015 IEEE International Conference on Communications (ICC). doi:10.1109/icc.2015.724851

On the Frequency Dependency of Radio Channel's Delay Spread: Analyses and Findings From mmMAGIC Multi-frequency Channel Sounding

This paper analyzes the frequency dependency of the radio propagation channel's root mean square (rms) delay spread (DS), based on the multi-frequency measurement campaigns in the mmMAGIC project. The campaigns cover indoor, outdoor, and outdoor-to-indoor (O2I) scenarios and a wide frequency range from 2 to 86 GHz. Several requirements have been identified that define the parameters which need to be aligned in order to make a reasonable comparison among the different channel sounders employed for this study. A new modelling approach enabling the evaluation of the statistical significance of the model parameters from different measurements and the establishment of a unified model is proposed. After careful analysis, the conclusion is that any frequency trend of the DS is small considering its confidence intervals. There is statistically significant difference from the 3GPP New Radio (NR) model TR 38.901, except for the O2I scenario.Comment: This paper has been accepted to the 2018 12th European Conference on Antennas and Propagation (EuCAP), London, UK, April 201

Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation

New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The system implementation, using the universal software radio peripheral (USRP) and GNU Radio, is described and compared to previous work. By overcoming computational limitations and performing direct-sequence spread-spectrum (DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive CIR estimation. We validate the channel sounder and present a drive test campaign which measures hundreds of channels between WiFi access points and an in-vehicle receiver in urban and suburban areas

An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters

A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values

Polarization properties of specular and dense multipath components in a large industrial hall

This paper presents an analysis of the polarization characteristics of specular and dense multipath components (SMC & DMC) in a large industrial hall based on frequency-domain channel sounding experiments at 1.3 GHz with 22 MHz bandwidth. The RiMAX maximum-likelihood estimator is used to extract the full polarimetric SMC and DMC from the measurement data by taking into account the polarimetric radiating patterns of the dual-polarized antennas. Cross-polar discrimination (XPD) values are presented for the measured channels and for the SMC and DMC separately