1,528 research outputs found
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Multicast broadcast services support in OFDMA-based WiMAX systems [Advances in mobile multimedia]
Multimedia stream service provided by broadband wireless networks has emerged as an important technology and has attracted much attention. An all-IP network architecture with reliable high-throughput air interface makes orthogonal frequency division multiplexing access (OFDMA)-based mobile worldwide interoperability for microwave access (mobile WiMAX) a viable technology for wireless multimedia services, such as voice over IP (VoIP), mobile TV, and so on. One of the main features in a WiMAX MAC layer is that it can provide'differentiated services among different traffic categories with individual QoS requirements. In this article, we first give an overview of the key aspects of WiMAX and describe multimedia broadcast multicast service (MBMS) architecture of the 3GPP. Then, we propose a multicast and broadcast service (MBS) architecture for WiMAX that is based on MBMS. Moreover, we enhance the MBS architecture for mobile WiMAX to overcome the shortcoming of limited video broadcast performance over the baseline MBS model. We also give examples to demonstrate that the proposed architecture can support better mobility and offer higher power efficiency
Massive MIMO for Next Generation Wireless Systems
Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over
conventional point-to-point MIMO: it works with cheap single-antenna terminals,
a rich scattering environment is not required, and resource allocation is
simplified because every active terminal utilizes all of the time-frequency
bins. However, multi-user MIMO, as originally envisioned with roughly equal
numbers of service-antennas and terminals and frequency division duplex
operation, is not a scalable technology. Massive MIMO (also known as
"Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension
MIMO" & "ARGOS") makes a clean break with current practice through the use of a
large excess of service-antennas over active terminals and time division duplex
operation. Extra antennas help by focusing energy into ever-smaller regions of
space to bring huge improvements in throughput and radiated energy efficiency.
Other benefits of massive MIMO include the extensive use of inexpensive
low-power components, reduced latency, simplification of the media access
control (MAC) layer, and robustness to intentional jamming. The anticipated
throughput depend on the propagation environment providing asymptotically
orthogonal channels to the terminals, but so far experiments have not disclosed
any limitations in this regard. While massive MIMO renders many traditional
research problems irrelevant, it uncovers entirely new problems that urgently
need attention: the challenge of making many low-cost low-precision components
that work effectively together, acquisition and synchronization for
newly-joined terminals, the exploitation of extra degrees of freedom provided
by the excess of service-antennas, reducing internal power consumption to
achieve total energy efficiency reductions, and finding new deployment
scenarios. This paper presents an overview of the massive MIMO concept and
contemporary research.Comment: Final manuscript, to appear in IEEE Communications Magazin
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Filter Bank Multicarrier for Massive MIMO
This paper introduces filter bank multicarrier (FBMC) as a potential
candidate in the application of massive MIMO communication. It also points out
the advantages of FBMC over OFDM (orthogonal frequency division multiplexing)
in the application of massive MIMO. The absence of cyclic prefix in FBMC
increases the bandwidth efficiency. In addition, FBMC allows carrier
aggregation straightforwardly. Self-equalization, a property of FBMC in massive
MIMO that is introduced in this paper, has the impact of reducing (i)
complexity; (ii) sensitivity to carrier frequency offset (CFO); (iii)
peak-to-average power ratio (PAPR); (iv) system latency; and (v) increasing
bandwidth efficiency. The numerical results that corroborate these claims are
presented.Comment: 7 pages, 6 figure
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
- …