CELL WILTING AND BLOSSOMING FOR ENERGY EFFICIENCY

n/

Control-data separation architecture for cellular radio access networks: a survey and outlook

Conventional cellular systems are designed to ensure ubiquitous coverage with an always present wireless channel irrespective of the spatial and temporal demand of service. This approach raises several problems due to the tight coupling between network and data access points, as well as the paradigm shift towards data-oriented services, heterogeneous deployments and network densification. A logical separation between control and data planes is seen as a promising solution that could overcome these issues, by providing data services under the umbrella of a coverage layer. This article presents a holistic survey of existing literature on the control-data separation architecture (CDSA) for cellular radio access networks. As a starting point, we discuss the fundamentals, concepts, and general structure of the CDSA. Then, we point out limitations of the conventional architecture in futuristic deployment scenarios. In addition, we present and critically discuss the work that has been done to investigate potential benefits of the CDSA, as well as its technical challenges and enabling technologies. Finally, an overview of standardisation proposals related to this research vision is provided

Base Station Energy Efficiency Improvement for Next Generation Mobile Networks

Abstract—As more and more Base Stations (BSs) are being deployed by mobile operators to meet the ever increasing data traffic, solutions have to be found to try and reduce BS energy consumption to make the BSs more energy efficient and to reduce the mobile networks’ operational expenditure (OPEX) and carbon dioxide emissions. In this paper, a BS sleeping technology deployable in heterogeneous networks (HetNets) is proposed. The proposed scheme is validated by using extensive OMNeT++/SimuLTE simulations. From the simulations, it is shown that some lightly loaded micro BSs can be put to sleep in a HetNet when the network traffic is very low without compromising the QoS of the mobile network

Maximizing Profit in Green Cellular Networks through Collaborative Games

In this paper, we deal with the problem of maximizing the profit of Network Operators (NOs) of green cellular networks in situations where Quality-of-Service (QoS) guarantees must be ensured to users, and Base Stations (BSs) can be shared among different operators. We show that if NOs cooperate among them, by mutually sharing their users and BSs, then each one of them can improve its net profit. By using a game-theoretic framework, we study the problem of forming stable coalitions among NOs. Furthermore, we propose a mathematical optimization model to allocate users to a set of BSs, in order to reduce costs and, at the same time, to meet user QoS for NOs inside the same coalition. Based on this, we propose an algorithm, based on cooperative game theory, that enables each operator to decide with whom to cooperate in order to maximize its profit. This algorithms adopts a distributed approach in which each NO autonomously makes its own decisions, and where the best solution arises without the need to synchronize them or to resort to a trusted third party. The effectiveness of the proposed algorithm is demonstrated through a thorough experimental evaluation considering real-world traffic traces, and a set of realistic scenarios. The results we obtain indicate that our algorithm allows a population of NOs to significantly improve their profits thanks to the combination of energy reduction and satisfaction of QoS requirements.Comment: Added publisher info and citation notic

Minimizing power consumption in virtualized cellular networks

Cellular network nodes should be dynamically switched on/off based on the load requirements of the network, to save power and minimize inter-cell interference. This should be done keeping into account global interference effects, which requires a centralized approach. In this paper, we present an architecture, realized within the Flex5GWare EU project, that manages a large-scale cellular network, switching on and off nodes based on load requirements and context data. We describe the architectural framework and the optimization model that is used to decide the activity state of the nodes. We present simulation results showing that the framework adapts to the minimum power level based on the cell loads

Energy saving market for mobile operators

Ensuring seamless coverage accounts for the lion's share of the energy consumed in a mobile network. Overlapping coverage of three to five mobile network operators (MNOs) results in enormous amount of energy waste which is avoidable. The traffic demands of the mobile networks vary significantly throughout the day. As the offered load for all networks are not same at a given time and the differences in energy consumption at different loads are significant, multi-MNO capacity/coverage sharing can dramatically reduce energy consumption of mobile networks and provide the MNOs a cost effective means to cope with the exponential growth of traffic. In this paper, we propose an energy saving market for a multi-MNO network scenario. As the competing MNOs are not comfortable with information sharing, we propose a double auction clearinghouse market mechanism where MNOs sell and buy capacity in order to minimize energy consumption. In our setting, each MNO proposes its bids and asks simultaneously for buying and selling multi-unit capacities respectively to an independent auctioneer, i.e., clearinghouse and ends up either as a buyer or as a seller in each round. We show that the mechanism allows the MNOs to save significant percentage of energy cost throughout a wide range of network load. Different than other energy saving features such as cell sleep or antenna muting which can not be enabled at heavy traffic load, dynamic capacity sharing allows MNOs to handle traffic bursts with energy saving opportunity.Comment: 6 pages, 2 figures, to be published in ICC 2015 workshop on Next Generation Green IC

A practical framework for energy-efficient node activation in heterogeneous LTE networks

This paper presents a framework to activate and deactivate micro nodes in a heterogeneous multi-cell LTE network, based on load and energy efficiency consideration. The framework exploits historical data (i.e., per-macro-cell load curves) to select a set of candidate switch-on/switch-off instants of micro cells, assuming a limited number of state changes is allowed in a day. The switching instants are instead determined online, by taking into account the actual traffic as well as the load curves. Moreover, intercell interference is fully accounted for. Our simulations show that this framework allows a multi-cell network to sustain peak-hour load when necessary, and to reconfigure to a minimum coverage baseline whenever feasible, thus saving power (up to 25% in our scenarios). Moreover, the framework is robust, meaning that deviations of the actual traffic with respect to the prediction offered by the load curves can easily be handled

An Energy-Aware Protocol for Self-Organizing Heterogeneous LTE Systems

This paper studies the problem of self-organizing heterogeneous LTE systems. We propose a model that jointly considers several important characteristics of heterogeneous LTE system, including the usage of orthogonal frequency division multiple access (OFDMA), the frequency-selective fading for each link, the interference among different links, and the different transmission capabilities of different types of base stations. We also consider the cost of energy by taking into account the power consumption, including that for wireless transmission and that for operation, of base stations and the price of energy. Based on this model, we aim to propose a distributed protocol that improves the spectrum efficiency of the system, which is measured in terms of the weighted proportional fairness among the throughputs of clients, and reduces the cost of energy. We identify that there are several important components involved in this problem. We propose distributed strategies for each of these components. Each of the proposed strategies requires small computational and communicational overheads. Moreover, the interactions between components are also considered in the proposed strategies. Hence, these strategies result in a solution that jointly considers all factors of heterogeneous LTE systems. Simulation results also show that our proposed strategies achieve much better performance than existing ones

Measurements and Modelling of Base Station Power Consumption under Real Traffic Loads †

Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications) and UMTS (Universal Mobile Telecommunications System) base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient