Adjacent Partitioning Based MIMO-OFDM System with Partial Transmit Sequence for PAPR Reduction

The multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) transmission approach has been chosen to be a standard of fourth-generation (4G) wireless communication systems, but it has to cope with the main disadvantages and challenges of OFDM-based techniques, including the high peak-to-average power ratio (PAPR). Peak to average power ratio (PAPR) being a predictable random variable in multicarrier system and it can be minimized by different techniques. Complementary cumulative distribution function (CCDF) is used to describe the PAPR appropriately. Partial transmit sequence (PTS) is an attractive distortion less peak-to-average power ratio (PAPR) reduction technique for orthogonal frequency division multiplexing (OFDM) system. In this paper the performance of one of scrambling technique called partial transmit sequence (PTS) in MIMO-OFDM system and adjacent partitioning(one of the partitioning technique) in MIMO-OFDM system with PTS are analyzed based on the characteristics of CCDF DOI: 10.17762/ijritcc2321-8169.150514

Pulse shaping approach to PAPR reduction for OFDM communication systems

One of the main drawbacks of the OFDM communication system is the high peak-to-average-power ratio (PAPR) of the transmitted signal. In this thesis: (i ) Optimal pulse shaping filter design is proposed to reduce the PAPR of the OFDM signal; (ii ) The level crossing rate theorem is used to derive an upper bound for the CCDF of PAPR of OFDM signal with pulse shaping; (iii ) The multiple filter design is proposed to reduce the PAPR of multiuser OFDM signal

Digital signal processing techniques for peak-to-average power ratio mitigation in MIMO–OFDM systems

The focus of this thesis is to mitigate the very large peak-to-average transmit power ratios (PAPRs) inherent to conventional orthogonal frequency division multiplexing (OFDM) systems, particularly in the context of transmission over multi-input multi-output (MIMO) wireless broadband channels. This problem is important as a large PAPR generally needs an expensive radio frequency (RF) power amplifier at the transmitter due to the requirement for linear operation over a wide amplitude range and such a cost would be compounded when multiple transmit antennas are used. Advanced signal processing techniques which can reduce PAPR whilst retain the integrity of digital transmission therefore have considerable potential for application in emergent MIMO–OFDM wireless systems and form the technical contributions of this study. [Continues.

OFDM base T-transform for wireless communication networks

The prominent features associated with orthogonal frequency division multiplexing (OFDM) have been exploited in the area of high-speed communication networks. However, OFDM is prone to impairments such as frequency selective fading channel, high peak-to-average power ratio (PAPR) and heavy-tailed distributed impulsive noise, all of which can have negative impacts on its performance. These issues have received a great deal of attention in recent research. To compensate for these transmission impairments, a T-OFDM based system is introduced using a low computational complexity T-transform that combines the Walsh-Hadamard transform (WHT) and the discrete Fourier transform (DFT) into a single fast orthonormal unitary transform. The key contribution in this thesis is on the use of the T-transform along with three novel receiver designs. Additionally, new theoretical bit error rate (BER) formulae for the T-OFDM system are derived over communications channels using zero forcing (ZF) and minimum mean square error (MMSE) detectors, that are validated via simulation and shown to have close performance with the obtained performance results. It has been found that the T-OFDM outperformed the conventional OFDM based systems in the investigated channel models by achieving a signal-to-noise ratio (SNR) gain range of between 9dB and 16dB measured at 10−4 BER. In addition, the sparsity and block diagonal structure of the T-transform, along with its lower summation processes are exploited in this study to reduce the superposition of the subcarriers, leading to reduce the peak of the transmitted signals by a range of 0.75 to 1.2 dB with preserved average power. Furthermore, these attractive features of T-transform are employed with the conventional selective mapping (SLM) and partial transmitted sequences (PTS) schemes to propose three low cost novel techniques; T-SLM, T-PTS-I, and T-PTS-II. Compared to the conventional schemes, the T-SLM and T-PTS-I schemes have achieved a considerable reduction in both computational complexity and in PAPR, further increasing multipath resilience, even in the presence of high power amplifier (HPA). Whereas using the T-PTS-II scheme, the complexity ratio has been significantly reduced by approximately 80%, as well as reducing the SI bits further by two, with negligible PAPR degradation. Moreover, the effect of the independent sections of T-transform on the performance of T-OFDM system over the impulsive channel is addressed in this work, by deriving a new theoretical BER formula over such a transmission media. Furthermore, two novel II schemes WHT-MI-OFDM and WHT-MI-OFDM incorporating nonlinear blanking, both of which utilise the WHT and a matrix interleaver (MI) with the OFDM system, are proposed to suppress the deleterious effects of a severe impulsive noise burst on the T-OFDM system performance. Comparing with the traditional MI-OFDM system, the proposed schemes are much more robust to disturbances arising from the impulsive channel.EThOS - Electronic Theses Online ServiceMinistry of Higher Education and Scientific ResearchIraqGBUnited Kingdo

CO-OFDM Elastic Optical Networks - Issues on Transmission, Routing, and Bandwidth Allocation

The use of orthogonal frequency division multiplexing (OFDM) technology helps an optical transmission system to break the limitation of wavelength grids by wavelength division multiplexing (WDM), in which a flexible and elastic transmission paradigm is created, so as to achieve better energy and spectrum efficiency and flexibility of the fiber resource. By jointly considering the nonlinear effect of Mach-Zehnder modulator (MZM) and amplified spontaneous emission (ASE) noise, we first provide an analytical model on the bit error rate (BER) performance for a single elastic optical transmission line. A novel adaptive transmission strategy in OFDM-based elastic optical transmission systems is proposed. Based on the adaptive transmission strategy, an optimization problem is formulated and solved via mathematical programming. By using proposed adaptive transmission strategy, the routing and bandwidth allocation (RBA) problem is formulated in elastic optical networks and numerically solved to route a set of lightpaths into a network according to the static or dynamic traffic demands with the best energy efficiency, where the laser transmit power, modulation level, number of subcarriers, and routing path of each node pair, are jointly determined. Case studies via extensive numerical experiments are conducted to verify the proposed strategy and gain better understanding on the solutions of formulated optimization problem. By further extending proposed adaptive transmission strategy, we propose a novel adaptive radio-over-fiber (RoF) transmission system for next-generation cloud radio access network (C-RAN). By considering nonlinear distortion from both MZM and high power amplifier (HPA), a 2 x 2 MIMO-OFDM baseband model for simulating the required ESNR of end-to-end RoF transmission system is developed. The RoF system for current C-RAN and proposed RoF system for future C-RAN are presented. We also propose a model to analyze the power consumption for the optical part of RoF transmission system. By performing case studies, proposed RoF system is demonstrated to be more energy efficient than current RoF system.4 month

Enhanced energy and spectrum efficiency in visible light communications

In recent years, there has been a surge in data traffic, leading to the investigation of using optical frequencies in conjunction with radio frequency (RF) wireless communication systems. One such technology is visible light communication (VLC), which uses light-emitting diodes (LEDs) in the visible light spectrum to transmit data. VLC has gained popularity for short-range wireless connections due to its energy efficiency, low-cost, and wide availability of front-end devices. However, one of the main challenges in designing a VLC system is improving its energy and spectral efficiency. This thesis aims to investigate techniques and determine the most effective methods for enhancing the energy and spectral efficiency of VLC systems. The thesis examined methods for optimising the bias point of an LED to benefit from increasing bandwidth at higher driving current while minimising the resulting signal distortion. The approaches are based on allowing for some nonlinear distortion or reducing signal swing/signal-to-noise ratio (SNR) while benefiting from higher bandwidth at higher driving currents. A framework is presented to estimate the attainable capacity under both conditions. Simulation results showed that the optimal bias point does not lie in the middle of the dynamic range. This was verified through a PAM-based VLC experiment, which showed that the transmission rate can be increased by choosing the optimal bias current instead of the midpoint of the linear range. Subsequently, VLC with probabilistic shaping (PS) is studied to optimise the distribution of source symbols and improve system performance. In this study, the error performance of PS is analysed, and closed-form analytical expressions are provided. The results show that PS outperforms the conventional uniform distribution and significantly reduces the required SNR to achieve a certain error probability. To demonstrate the practical application of PS in VLC, it was implemented in conjunction with optical orthogonal frequency-division multiplexing (OFDM) modulation. This allowed for continuous and adaptive loading of information bits to the channel response, resulting in an efficient use of available modulation bandwidth and transmission rates close to the channel capacity limits. In the two experimental demonstrations, a single low-power LED and a wavelength-division multiplexing (WDM) system using three off-the-shelf LEDs were used to achieve bit rates of 1.13~Gbps and 10.81~Gbps, respectively, representing increases of 27.13\% and 25.7\% over the traditional bit-power loading technique. Finally, an alternative approach towards enhancing the energy of VLC systems is introduced using frequency shift chirp modulation (FSCM). The error performance of FSCM was analysed in different types of channels, and a proof-of-concept experiment was conducted to demonstrate its potential use in VLC systems. FSCM offers improved robustness in band-limited, frequency-selective channels compared to other modulation techniques. This makes it a promising choice for integrating into VLC systems, particularly in low-power and low-rate application scenarios

Spectrally efficient FDM communication signals and transceivers: design, mathematical modelling and system optimization

This thesis addresses theoretical, mathematical modelling and design issues of Spectrally Efficient FDM (SEFDM) systems. SEFDM systems propose bandwidth savings when compared to Orthogonal FDM (OFDM) systems by multiplexing multiple non-orthogonal overlapping carriers. Nevertheless, the deliberate collapse of orthogonality poses significant challenges on the SEFDM system in terms of performance and complexity, both issues are addressed in this work. This thesis first investigates the mathematical properties of the SEFDM system and reveals the links between the system conditioning and its main parameters through closed form formulas derived for the Intercarrier Interference (ICI) and the system generating matrices. A rigorous and efficient mathematical framework, to represent non-orthogonal signals using Inverse Discrete Fourier Transform (IDFT) blocks, is proposed. This is subsequently used to design simple SEFDM transmitters and to realize a new Matched Filter (MF) based demodulator using the Discrete Fourier Transforms (DFT), thereby substantially simplifying the transmitter and demodulator design and localizing complexity at detection stage with no premium at performance. Operation is confirmed through the derivation and numerical verification of optimal detectors in the form of Maximum Likelihood (ML) and Sphere Decoder (SD). Moreover, two new linear detectors that address the ill conditioning of the system are proposed: the first based on the Truncated Singular Value Decomposition (TSVD) and the second accounts for selected ICI terms and termed Selective Equalization (SelE). Numerical investigations show that both detectors substantially outperform existing linear detection techniques. Furthermore, the use of the Fixed Complexity Sphere Decoder (FSD) is proposed to further improve performance and avoid the variable complexity of the SD. Ultimately, a newly designed combined FSD-TSVD detector is proposed and shown to provide near optimal error performance for bandwidth savings of 20% with reduced and fixed complexity. The thesis also addresses some practical considerations of the SEFDM systems. In particular, mathematical and numerical investigations have shown that the SEFDM signal is prone to high Peak to Average Power Ratio (PAPR) that can lead to significant performance degradations. Investigations of PAPR control lead to the proposal of a new technique, termed SLiding Window (SLW), utilizing the SEFDM signal structure which shows superior efficacy in PAPR control over conventional techniques with lower complexity. The thesis also addresses the performance of the SEFDM system in multipath fading channels confirming favourable performance and practicability of implementation. In particular, a new Partial Channel Estimator (PCE) that provides better estimation accuracy is proposed. Furthermore, several low complexity linear and iterative joint channel equalizers and symbol detectors are investigated in fading channels conditions with the FSD-TSVD joint equalization and detection with PCE obtained channel estimate facilitating near optimum error performance, close to that of OFDM for bandwidth savings of 25%. Finally, investigations of the precoding of the SEFDM signal demonstrate a potential for complexity reduction and performance improvement. Overall, this thesis provides the theoretical basis from which practical designs are derived to pave the way to the first practical realization of SEFDM systems

Multiuser MIMO-OFDM for Next-Generation Wireless Systems

This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station’s or radio port’s coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems

An enhanced multicarrier modulation system for mobile communications

PhD ThesisThe recent revolution in mobile communications and the increased demand on more efficient transmission systems influence the research to enhance and invent new modulation techniques. Orthogonal frequency division multiplexing with offset quadrature amplitude modulation (OFDM/OQAM) is one of the multicarrier modulations techniques that overcomes some of the weaknesses of the conventional OFDM in term of bandwidth and power efficiencies. This thesis presents a novel multicarrier modulation scheme with improved performance in mobile communications context. Initially, the theoretical principles behind OFDM and OFDM/OQAM are discussed and the advantages of OFDM/OQAM over OFDM are highlighted. The time-frequency localization of pulse shapes is examined over different types of pulses. The effect of the localization and the pulse choice on OFDM/OQAM performance is demonstrated. The first contribution is introducing a new variant of multicarrier modulation system based on the integration of the Walsh-Hadamard transform with the OFDM/OQAM modulator. The full analytical transmission model of the system is derived over flat fading and frequency selective channels. Next, because of the critical requirement of low implementation complexity in mobile systems, a new fast algorithm transform is developed to reduce the implementation complexity of the system. The introduced fast algorithm has demonstrated a remarkable 60 percent decrease in the hardware requirement compared to the cascaded configuration. Although, the problem of high peak to average power ratio (PAPR) is one of the main drawbacks that associated with most multicarrier modulation techniques, the new system achieved lower values compared to the conventional systems. Subsequently, three new algorithms to reduce PAPR named Walsh overlapped selective mapping (WOSLM) for a high PAPR reduction, simplified selective mapping (SSLM) for a very low implementation complexity and Walsh partial transmit sequence (WPTS), are developed. Finally, in order to assess the reliability of the presented system in this thesis at imperfect environments, the performance of the system is investigated in the presence of high power amplifier, channel estimation errors, and carrier frequency offset (CFO). Two channel estimations algorithms named enhanced pair of pilots (EPOP) and averaged enhanced pair of pilots (AEPOP), and one CFO estimator technique called frequency domain (FD) CFO estimator, are suggested to provide reliable performance.Ministry of Higher Education and Scientific Research (MOHSR) of Ira