Spare capacity allocation using shared backup path protection for dual link failures

This paper extends the spare capacity allocation (SCA) problem from single link failure [1] to dual link failures on mesh-like IP or WDM networks. The SCA problem pre-plans traffic flows with mutually disjoint one working and two backup paths using the shared backup path protection (SBPP) scheme. The aggregated spare provision matrix (SPM) is used to capture the spare capacity sharing for dual link failures. Comparing to a previous work by He and Somani [2], this method has better scalability and flexibility. The SCA problem is formulated in a non-linear integer programming model and partitioned into two sequential linear sub-models: one finds all primary backup paths first, and the other finds all secondary backup paths next. The results on five networks show that the network redundancy using dedicated 1+1+1 is in the range of 313-400%. It drops to 96-181% in 1:1:1 without loss of dual-link resiliency, but with the trade-off of using the complicated share capacity sharing among backup paths. The hybrid 1+1:1 provides intermediate redundancy ratio at 187-310% with a moderate complexity. We also compare the passive/active approaches which consider spare capacity sharing after/during the backup path routing process. The active sharing approaches always achieve lower redundancy values than the passive ones. These reduction percentages are about 12% for 1+1:1 and 25% for 1:1:1 respectively

Link failure protection and restoration in WDM optical networks

In a wavelength-division-multiplexing (WDM) optical network, the failure of fiber links may cause the failure of multiple optical channels, thereby leading to large data loss. Therefore the survivable WDM optical networks where the affected traffic under link failure can be restored, have been a matter of much concern. On the other hand, network operators want options that are more than just survivable, but more flexible and more efficient in the use of capacity. In this thesis, we propose our cost-effective approaches to survive link failures in WDM optical networks. Dynamic establishment of restorable connections in WDM networks is an important problem that has received much study. Existing algorithms use either path-based method or link-based method to protect a dynamic connection; the former suffers slow restoration speed while the latter requires complicated online backup path computation. We propose a new dynamic restorable connection establishment algorithm using p-cycle protection. For a given connection request, our algorithm first computes a working path and then computes a set of p-cycles to protect the links on the working path so that the connection can survive any single link failure. The key advantage of the proposed algorithm over the link-based method is that it enables faster failure restoration while requires much simpler online computation for connection establishment. Tree-based schemes offer several advantages such as scalability, failure impact restriction and distributed processing. We present a new tree-based link protection scheme to improve the hierarchical protection tree (p-tree) scheme [31] for single link failure in mesh networks, which achieves 100% restorability in an arbitrary 2-connected network. To minimize the total spare capacity for single link failure protection, an integer linear programming (ILP) formulation is provided. We also develop a fast double-link failure restoration scheme by message signaling to take advantage of the scalable and distributed processing capability of tree structure

Survivability issues in WDM optical networks

WDM optical networks make it possible for the bandwidth of transport networks to reach a level on which any failures would cause tremendous data loss and affect a lot of users. Thus, survivability issues of WDM optical networks have attracted a lot of research work. Within the scope of this dissertation, two categories of problems are studied, one is survivable mapping from IP topology to WDM topology, the other is p-cycle protection schemes in WDM networks.;Survivable mapping problem can be described as routing IP links on the WDM topology such that the IP topology stays connected under any single link failure in the WDM topology. This problem has been proved to be NP-complete [1]. At first, this dissertation provides a heuristic algorithm to compute approximated solutions for input IP/WDM topologies as an approach to ease the hardness of it. Then, it examines the problem with a different view, to augment the IP topology so that a survivable mapping can be easily computed. This new perspective leads to an extended survivable mapping problem that is originally proposed and analyzed in this dissertation. In addition, this dissertation also presents some interesting open problems for the survivable mapping problem as future work.;Various protection schemes in WDM networks have been explored. This dissertation focuses on methods based on the p-cycle technology. p-Cycle protection inherits the merit of fast restoration from the link-based protection technology while yielding higher efficiency on spare capacity usage [2]. In this dissertation, we first propose an efficient heuristic algorithm that generates a small subset of candidate cycles that guarantee 100% restorability and help to achieve an efficient design. Then, we adapt p-cycle design to accommodate the protection of the failure of a shared risk link group (SRLG). At last, we discuss the problem of establishing survivable connections for dynamic traffic demands using flow p-cycle

Design and operation of mesh-restorable WDM networks

The explosive growth of Web-related services over the Internet is bringing millions of new users online, thus creating a growing demand for bandwidth. Wavelength Division Multiplexed (WDM) networks, employing wavelength routing has emerged as the dominant technology to satisfy this growing demand for bandwidth. As the amount of traffic carried is larger, any single failure can be catastrophic. Survivability becomes indispensable in such networks. Therefore, it is imperative to design networks that can quickly and efficiently recover from failures.;In this dissertation, we explore the design and operation of survivable optical networks. We study several survivability paradigms for surviving single link failures. A restoration model is developed based on a combination of these paradigms. We propose an optimal design and upgrade scheme for WDM backbone networks. We formulate an integer programming-based design problem to minimize the total facility cost. This framework provides a cost effective way of upgrading the network by identifying how much resources to budget at each stage of network evolution. This results in significant cost reductions for the network service provider.;As part of network operation, we capture multiple operational phases in survivable network operation as a single integer programming formulation. This common framework incorporates service disruption and includes a service differentiation model based on lightpath protection. However, the complexity of the optimization problem makes the formulation applicable only for network provisioning and o2ine reconfiguration. The direct use of such methods for online reconfiguration remains limited to small networks with few tens of wavelengths. We develop a heuristic algorithm based on LP relaxation technique for fast, near optimal, online reconfiguration. Since the ILP variables are relaxed, we provide a way to derive a feasible solution from the relaxed problem. Most of the current approaches assume centralized information. They do not scale well as they rely on per-flow information. This motivates the need for developing dynamic algorithms based on partial information. The partial information we use can be easily obtained from traffic engineering extensions to routing protocols. Finally, the performance of partial information routing algorithms is compared through simulation studies

Survivable design in WDM mesh networks

This dissertation addresses several important survivable design issues in WDM mesh networks;Shared backup path protection has been shown to be efficient in terms of capacity utilization, due to the sharing of backup capacity. However, sharing of backup capacity also complicates the restoration process, and leads to slow recovery. The p-cycle scheme is the most efficient ring-type protection method in terms of capacity utilization. Recently, the concept of pre-cross-connected protection was proposed to increase the recovery speed of shared path protection. We overview these protection methods. The recovery time of these schemes are compared analytically. We formulate integer programming optimization problems for three protection methods in static traffic scenario, considering wavelength continuity constraint;We develop a p-cycle based scheme to deal with dynamic traffic in WDM networks. We use a two-step approach. In first step, we find a set of p-cycles to cover the network and reserve enough capacity in p-cycles. In second step, we route the requests as they randomly arrive one by one. We propose two routing algorithms. Compared to the shared path protection, the p-cycle based design has the advantage of fast recovery, less control signaling, less dynamic state information to be maintained. To evaluate the blocking performance of proposed method, we compare it with shared backup path protection by extensive simulations;We propose a path-based protection method for two-link failures in mesh optical networks. We identify the scenarios where the backup paths can share their wavelengths without violating 100% restoration guarantee (backup multiplexing). We use integer linear programming to optimize the total capacity requirement for both dedicated- and shared-path protection schemes;The recently proposed light trail architecture offers a promising candidate for carrying IP centric traffic over optical networks. The survivable design is a critical part of the integral process of network design and operation. We propose and compare two protection schemes. The survivable light trail design problem using connection based protection model is solved using a two-step approach. (Abstract shortened by UMI.

Design, protocol and routing algorithms for survivable all-optical networks.

by Hui Chi Chun Ronald.Thesis submitted in: December 1998.Thesis (M.Phil.)--Chinese University of Hong Kong, 1999.Includes bibliographical references (leaves 62-66).Abstract also in Chinese.Chapter Chapter 1. --- Introduction --- p.1Chapter Chapter 2. --- AON Architecture --- p.7Chapter 2.1 --- WCC Dimension Reduction Node Architecture --- p.10Chapter 2.2 --- Restoration of a Survivable AON --- p.13Chapter Chapter 3. --- Network Dimensioning Problem --- p.15Chapter 3.1 --- Problem Setting --- p.16Chapter 3.2 --- Two Solution Approaches --- p.16Chapter 3.2.1 --- Minimum Variance Algorithm (MVA) --- p.17Chapter 3.2.2 --- Minimum Variance Subroutine (MVS) --- p.19Chapter 3.3 --- Shortest Path Algorithm (SPA) --- p.21Chapter 3.4 --- An Illustrative Example --- p.22Chapter 3.5 --- Performance Comparisons --- p.26Chapter Chapter 4. --- Network Management for AON Restoration --- p.31Chapter 4.1 --- Surveillance Network --- p.31Chapter 4.2 --- Signaling Network --- p.32Chapter 4.3 --- Network Management System --- p.32Chapter 4.4 --- CCS7 Adaptation for Supporting AON Restoration --- p.34Chapter Chapter 5. --- Complete Restoration Algorithm for AON --- p.40Chapter 5.1 --- Link-Based Restoration Algorithm --- p.43Chapter 5.2 --- Source-Based Restoration Algorithm --- p.44Chapter 5.3 --- Case Studies --- p.45Chapter 5.3.1 --- Case I and II --- p.45Chapter 5.3.2 --- Case III --- p.50Chapter 5.4 --- Completely Restorable Network planning --- p.52Chapter 5.5 --- A Summary on Problem Formulations --- p.55Chapter Chapter 6. --- Conclusion --- p.57Reference --- p.6

Survivable mesh-network design & optimization to support multiple QoP service classes

Every second, vast amounts of data are transferred over communication systems around the world, and as a result, the demands on optical infrastructures are extending beyond the traditional, ring-based architecture. The range of content and services available from the Internet is increasing, and network operations are constantly under pressure to expand their optical networks in order to keep pace with the ever increasing demand for higher speed and more reliable links

Capacity optimization for surviving double-Link failures in mesh-restorable optical networks

Most research to date in survivable optical network design and operation, focused on the failure of a single component such as a link or a node. A double-link failure model in which any two links in the network may fail in an arbitrary order was proposed recently in literature. Three loop-back methods of recovering from double-link failures were also presented. The basic idea behind these methods is to pre-compute two backup paths for each link on the primary paths and reserve resources on these paths. Compared to protection methods for single-link failure model, the protection methods for double-link failure model require much more spare capacity. Reserving dedicated resources on every backup path at the time of establishing primary path itself would consume excessive resources. In Ref. 2 and 3, we captured the various operational phases in survivable WDM networks as a single integer programming based (ILP) optimization problem. In this work, we extend our optimization framework to include double-link failures. We use the double-link failure recovery methods available in literature, employ backup multiplexing schemes to optimize capacity utilization, and provide 100\% protection guarantee for double-link failure recovery. We develop rules to identify scenarios when capacity sharing among interacting demand sets is possible. Our results indicate that for the double-link failure recovery methods, the shared-link protection scheme provides 10-15\% savings in capacity utilization over the dedicated link protection scheme which reserves dedicated capacity on two backup paths for each link. We provide a way of adapting the heuristic based double-link failure recovery methods into a mathematical framework, and use techniques to improve wavelength utilization for optimal capacity usage