Letter from the Special Issue Editor

Editorial work for DEBULL on a special issue on data management on Storage Class Memory (SCM) technologies

Content-Aware Reduction of Bit Flips in Phase Change Memory

The energy costs of Phase Change Memory (PCM) depends almost completely on the number of bits written per time unit. By using an encoding, we can reduce the number of bit flips when overwriting low-entropy data with low-entropy data. This is achieved by using a frequency table for bytes in classes of data to select the encoding. Using various corpora of mainly HTML files, we show that we can reduce the number of bit flips by about 0.5 bit flips per byte

상변화 메모리 시스템의 간섭 오류 완화 및 RMW 성능 향상 기법

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2021.8. 이혁재.Phase-change memory (PCM) announces the beginning of the new era of memory systems, owing to attractive characteristics. Many memory product manufacturers (e.g., Intel, SK Hynix, and Samsung) are developing related products. PCM can be applied to various circumstances; it is not simply limited to an extra-scale database. For example, PCM has a low standby power due to its non-volatility; hence, computation-intensive applications or mobile applications (i.e., long memory idle time) are suitable to run on PCM-based computing systems. Despite these fascinating features of PCM, PCM is still far from the general commercial market due to low reliability and long latency problems. In particular, low reliability is a painful problem for PCM in past decades. As the semiconductor process technology rapidly scales down over the years, DRAM reaches 10 nm class process technology. In addition, it is reported that the write disturbance error (WDE) would be a serious issue for PCM if it scales down below 54 nm class process technology. Therefore, addressing the problem of WDEs becomes essential to make PCM competitive to DRAM. To overcome this problem, this dissertation proposes a novel approach that can restore meta-stable cells on demand by levering two-level SRAM-based tables, thereby significantly reducing the number WDEs. Furthermore, a novel randomized approach is proposed to implement a replacement policy that originally requires hundreds of read ports on SRAM. The second problem of PCM is a long-latency compared to that of DRAM. In particular, PCM tries to enhance its throughput by adopting a larger transaction unit; however, the different unit size from the general-purpose processor cache line further degrades the system performance due to the introduction of a read-modify-write (RMW) module. Since there has never been any research related to RMW in a PCM-based memory system, this dissertation proposes a novel architecture to enhance the overall system performance and reliability of a PCM-based memory system having an RMW module. The proposed architecture enhances data re-usability without introducing extra storage resources. Furthermore, a novel operation that merges commands regardless of command types is proposed to enhance performance notably. Another problem is the absence of a full simulation platform for PCM. While the announced features of the PCM-related product (i.e., Intel Optane) are scarce due to confidential issues, all priceless information can be integrated to develop an architecture simulator that resembles the available product. To this end, this dissertation tries to scrape up all available features of modules in a PCM controller and implement a dedicated simulator for future research purposes.상변화 메모리는(PCM) 매력적인 특성을 통해 메모리 시스템의 새로운 시대의 시작을 알렸다. 많은 메모리 관련 제품 제조업체(예 : 인텔, SK 하이닉스, 삼성)가 관련 제품 개발에 박차를 가하고 있다. PCM은 단순히 대규모 데이터베이스에만 국한되지 않고 다양한 상황에 적용될 수 있다. 예를 들어, PCM은 비휘발성으로 인해 대기 전력이 낮다. 따라서 계산 집약적인 애플리케이션 또는 모바일 애플리케이션은(즉, 긴 메모리 유휴 시간) PCM 기반 컴퓨팅 시스템에서 실행하기에 적합하다. PCM의 이러한 매력적인 특성에도 불구하고 PCM은 낮은 신뢰성과 긴 대기 시간으로 인해 여전히 일반 산업 시장에서는 DRAM과 다소 격차가 있다. 특히 낮은 신뢰성은 지난 수십 년 동안 PCM 기술의 발전을 저해하는 문제다. 반도체 공정 기술이 수년에 걸쳐 빠르게 축소됨에 따라 DRAM은 10nm 급 공정 기술에 도달하였다. 이어서, 쓰기 방해 오류 (WDE)가 54nm 등급 프로세스 기술 아래로 축소되면 PCM에 심각한 문제가 될 것으로 보고되었다. 따라서, WDE 문제를 해결하는 것은 PCM이 DRAM과 동등한 경쟁력을 갖추도록 하는 데 있어 필수적이다. 이 문제를 극복하기 위해 이 논문에서는 2-레벨 SRAM 기반 테이블을 활용하여 WDE 수를 크게 줄여 필요에 따라 준 안정 셀을 복원할 수 있는 새로운 접근 방식을 제안한다. 또한, 원래 SRAM에서 수백 개의 읽기 포트가 필요한 대체 정책을 구현하기 위해 새로운 랜덤 기반의 기법을 제안한다. PCM의 두 번째 문제는 DRAM에 비해 지연 시간이 길다는 것이다. 특히 PCM은 더 큰 트랜잭션 단위를 채택하여 단위시간 당 데이터 처리량 향상을 도모한다. 그러나 범용 프로세서 캐시 라인과 다른 유닛 크기는 읽기-수정-쓰기 (RMW) 모듈의 도입으로 인해 시스템 성능을 저하하게 된다. PCM 기반 메모리 시스템에서 RMW 관련 연구가 없었기 때문에 본 논문은 RMW 모듈을 탑재 한 PCM 기반 메모리 시스템의 전반적인 시스템 성능과 신뢰성을 향상하게 시킬 수 있는 새로운 아키텍처를 제안한다. 제안된 아키텍처는 추가 스토리지 리소스를 도입하지 않고도 데이터 재사용성을 향상시킨다. 또한, 성능 향상을 위해 명령 유형과 관계없이 명령을 병합하는 새로운 작업을 제안한다. 또 다른 문제는 PCM을 위한 완전한 시뮬레이션 플랫폼이 부재하다는 것이다. PCM 관련 제품(예 : Intel Optane)에 대해 발표된 정보는 대외비 문제로 인해 부족하다. 하지만 알려져 있는 정보를 적절히 취합하면 시중 제품과 유사한 아키텍처 시뮬레이터를 개발할 수 있다. 이를 위해 본 논문은 PCM 메모리 컨트롤러에 필요한 모든 모듈 정보를 활용하여 향후 이와 관련된 연구에서 충분히 사용 가능한 전용 시뮬레이터를 구현하였다.1 INTRODUCTION 1 1.1 Limitation of Traditional Main Memory Systems 1 1.2 Phase-Change Memory as Main Memory 3 1.2.1 Opportunities of PCM-based System 3 1.2.2 Challenges of PCM-based System 4 1.3 Dissertation Overview 7 2 BACKGROUND AND PREVIOUS WORK 8 2.1 Phase-Change Memory 8 2.2 Mitigation Schemes for Write Disturbance Errors 10 2.2.1 Write Disturbance Errors 10 2.2.2 Verification and Correction 12 2.2.3 Lazy Correction 13 2.2.4 Data Encoding-based Schemes 14 2.2.5 Sparse-Insertion Write Cache 16 2.3 Performance Enhancement for Read-Modify-Write 17 2.3.1 Traditional Read-Modify-Write 17 2.3.2 Write Coalescing for RMW 19 2.4 Architecture Simulators for PCM 21 2.4.1 NVMain 21 2.4.2 Ramulator 22 2.4.3 DRAMsim3 22 3 IN-MODULE DISTURBANCE BARRIER 24 3.1 Motivation 25 3.2 IMDB: In Module-Disturbance Barrier 29 3.2.1 Architectural Overview 29 3.2.2 Implementation of Data Structures 30 3.2.3 Modification of Media Controller 36 3.3 Replacement Policy 38 3.3.1 Replacement Policy for IMDB 38 3.3.2 Approximate Lowest Number Estimator 40 3.4 Putting All Together: Case Studies 43 3.5 Evaluation 45 3.5.1 Configuration 45 3.5.2 Architectural Exploration 47 3.5.3 Effectiveness of the Replacement Policy 48 3.5.4 Sensitivity to Main Table Configuration 49 3.5.5 Sensitivity to Barrier Buffer Size 51 3.5.6 Sensitivity to AppLE Group Size 52 3.5.7 Comparison with Other Studies 54 3.6 Discussion 59 3.7 Summary 63 4 INTEGRATION OF AN RMW MODULE IN A PCM-BASED SYSTEM 64 4.1 Motivation 65 4.2 Utilization of DRAM Cache for RMW 67 4.2.1 Architectural Design 67 4.2.2 Algorithm 70 4.3 Typeless Command Merging 73 4.3.1 Architectural Design 73 4.3.2 Algorithm 74 4.4 An Alternative Implementation: SRC-RMW 78 4.4.1 Implementation of SRC-RMW 78 4.4.2 Design Constraint 80 4.5 Case Study 82 4.6 Evaluation 85 4.6.1 Configuration 85 4.6.2 Speedup 88 4.6.3 Read Reliability 91 4.6.4 Energy Consumption: Selecting a Proper Page Size 93 4.6.5 Comparison with Other Studies 95 4.7 Discussion 97 4.8 Summary 99 5 AN ALL-INCLUSIVE SIMULATOR FOR A PCM CONTROLLER 100 5.1 Motivation 101 5.2 PCMCsim: PCM Controller Simulator 103 5.2.1 Architectural Overview 103 5.2.2 Underlying Classes of PCMCsim 104 5.2.3 Implementation of Contention Behavior 108 5.2.4 Modules of PCMCsim 109 5.3 Evaluation 116 5.3.1 Correctness of the Simulator 116 5.3.2 Comparison with Other Simulators 117 5.4 Summary 119 6 Conclusion 120 Abstract (In Korean) 141 Acknowledgment 143박

Memory Management for Emerging Memory Technologies

The Memory Wall, or the gap between CPU speed and main memory latency, is ever increasing. The latency of Dynamic Random-Access Memory (DRAM) is now of the order of hundreds of CPU cycles. Additionally, the DRAM main memory is experiencing power, performance and capacity constraints that limit process technology scaling. On the other hand, the workloads running on such systems are themselves changing due to virtualization and cloud computing demanding more performance of the data centers. Not only do these workloads have larger working set sizes, but they are also changing the way memory gets used, resulting in higher sharing and increased bandwidth demands. New Non-Volatile Memory technologies (NVM) are emerging as an answer to the current main memory issues. This thesis looks at memory management issues as the emerging memory technologies get integrated into the memory hierarchy. We consider the problems at various levels in the memory hierarchy, including sharing of CPU LLC, traffic management to future non-volatile memories behind the LLC, and extending main memory through the employment of NVM. The first solution we propose is “Adaptive Replacement and Insertion" (ARI), an adaptive approach to last-level CPU cache management, optimizing the cache miss rate and writeback rate simultaneously. Our specific focus is to reduce writebacks as much as possible while maintaining or improving miss rate relative to conventional LRU replacement policy, with minimal hardware overhead. ARI reduces writebacks on benchmarks from SPEC2006 suite on average by 32.9% while also decreasing misses on average by 4.7%. In a PCM based memory system, this decreases energy consumption by 23% compared to LRU and provides a 49% lifetime improvement beyond what is possible with randomized wear-leveling. Our second proposal is “Variable-Timeslice Thread Scheduling" (VATS), an OS kernel-level approach to CPU cache sharing. With modern, large, last-level caches (LLC), the time to fill the LLC is greater than the OS scheduling window. As a result, when a thread aggressively thrashes the LLC by replacing much of the data in it, another thread may not be able to recover its working set before being rescheduled. We isolate the threads in time by increasing their allotted time quanta, and allowing larger periods of time between interfering threads. Our approach, compared to conventional scheduling, mitigates up to 100% of the performance loss caused by CPU LLC interference. The system throughput is boosted by up to 15%. As an unconventional approach to utilizing emerging memory technologies, we present a Ternary Content-Addressable Memory (TCAM) design with Flash transistors. TCAM is successfully used in network routing but can also be utilized in the OS Virtual Memory applications. Based on our layout and circuit simulation experiments, we conclude that our FTCAM block achieves an area improvement of 7.9× and a power improvement of 1.64× compared to a CMOS approach. In order to lower the cost of Main Memory in systems with huge memory demand, it is becoming practical to extend the DRAM in the system with the less-expensive NVMe Flash, for a much lower system cost. However, given the relatively high Flash devices access latency, naively using them as main memory leads to serious performance degradation. We propose OSVPP, a software-only, OS swap-based page prefetching scheme for managing such hybrid DRAM + NVM systems. We show that it is possible to gain about 50% of the lost performance due to swapping into the NVM and thus enable the utilization of such hybrid systems for memory-hungry applications, lowering the memory cost while keeping the performance comparable to the DRAM-only system

Memory Management for Emerging Memory Technologies

The Memory Wall, or the gap between CPU speed and main memory latency, is ever increasing. The latency of Dynamic Random-Access Memory (DRAM) is now of the order of hundreds of CPU cycles. Additionally, the DRAM main memory is experiencing power, performance and capacity constraints that limit process technology scaling. On the other hand, the workloads running on such systems are themselves changing due to virtualization and cloud computing demanding more performance of the data centers. Not only do these workloads have larger working set sizes, but they are also changing the way memory gets used, resulting in higher sharing and increased bandwidth demands. New Non-Volatile Memory technologies (NVM) are emerging as an answer to the current main memory issues. This thesis looks at memory management issues as the emerging memory technologies get integrated into the memory hierarchy. We consider the problems at various levels in the memory hierarchy, including sharing of CPU LLC, traffic management to future non-volatile memories behind the LLC, and extending main memory through the employment of NVM. The first solution we propose is “Adaptive Replacement and Insertion" (ARI), an adaptive approach to last-level CPU cache management, optimizing the cache miss rate and writeback rate simultaneously. Our specific focus is to reduce writebacks as much as possible while maintaining or improving miss rate relative to conventional LRU replacement policy, with minimal hardware overhead. ARI reduces writebacks on benchmarks from SPEC2006 suite on average by 32.9% while also decreasing misses on average by 4.7%. In a PCM based memory system, this decreases energy consumption by 23% compared to LRU and provides a 49% lifetime improvement beyond what is possible with randomized wear-leveling. Our second proposal is “Variable-Timeslice Thread Scheduling" (VATS), an OS kernel-level approach to CPU cache sharing. With modern, large, last-level caches (LLC), the time to fill the LLC is greater than the OS scheduling window. As a result, when a thread aggressively thrashes the LLC by replacing much of the data in it, another thread may not be able to recover its working set before being rescheduled. We isolate the threads in time by increasing their allotted time quanta, and allowing larger periods of time between interfering threads. Our approach, compared to conventional scheduling, mitigates up to 100% of the performance loss caused by CPU LLC interference. The system throughput is boosted by up to 15%. As an unconventional approach to utilizing emerging memory technologies, we present a Ternary Content-Addressable Memory (TCAM) design with Flash transistors. TCAM is successfully used in network routing but can also be utilized in the OS Virtual Memory applications. Based on our layout and circuit simulation experiments, we conclude that our FTCAM block achieves an area improvement of 7.9× and a power improvement of 1.64× compared to a CMOS approach. In order to lower the cost of Main Memory in systems with huge memory demand, it is becoming practical to extend the DRAM in the system with the less-expensive NVMe Flash, for a much lower system cost. However, given the relatively high Flash devices access latency, naively using them as main memory leads to serious performance degradation. We propose OSVPP, a software-only, OS swap-based page prefetching scheme for managing such hybrid DRAM + NVM systems. We show that it is possible to gain about 50% of the lost performance due to swapping into the NVM and thus enable the utilization of such hybrid systems for memory-hungry applications, lowering the memory cost while keeping the performance comparable to the DRAM-only system

Integration of Non-volatile Memory into Storage Hierarchy

In this dissertation, we present novel approaches for integrating non-volatile memory devices into storage hierarchy of a computer system. There are several types of non- volatile memory devices, such as flash memory, Phase Change Memory (PCM), Spin- transfer torque memory (STT-RAM). These devices have many appealing features for applications; however, they also offer several challenges. This dissertation is focused on how to efficiently integrate these non-volatile memories into existing memory and disk storage systems. This work is composed of two major parts. The first part investigates a main-memory system employing Phase Change Memory instead of traditional DRAM. Compared to DRAM, PCM has higher density and no static power consumption, which are very important factors for building large capacity memory systems. However, PCM has higher write latency and power consumption compared to read operations. Moreover, PCM has limited write endurance. To efficiently integrate PCM into a memory system, we have to solve the challenges brought by its expensive write operations. We propose new replacement policies and cache organizations for the last-level CPU cache, which can effectively reduce the write traffic to the PCM main memory. We evaluated our design with multiple workloads and configurations. The results show that the proposed approaches improve the lifetime and energy consumption of PCM significantly. The second part of the dissertation considers the design of a data/disk storage using non-volatile memories, e.g. flash memory, PCM and nonvolatile DIMMs. We consider multiple design options for utilizing the nonvolatile memories in the storage hierarchy. First, we consider a system that employs nonvolatile memories such as PCM or nonvolatile DIMMs on memory bus along with flash-based SSDs. We propose a hybrid file system, NVMFS, that manages both these devices. NVMFS exploits the nonvolatile memory to improve the characteristics of the write workload at the SSD. We satisfy most small random write requests on the fast nonvolatile DIMM and only do large and optimized writes on SSD. We also group data of similar update patterns together before writing to flash-SSD; as a result, we can effectively reduce the garbage collection overhead. We implemented a prototype of NVMFS in Linux and evaluated its performance through multiple benchmarks. Secondly, we consider the problem of using flash memory as a cache for a disk drive based storage system. Since SSDs are expensive, a few SSDs are designed to serve as a cache for a large number of disk drives. SSD cache space can be used for both read and write requests. In our design, we managed multiple flash-SSD devices directly at the cache layer without the help of RAID software. To ensure data reliability and cache space efficiency, we only duplicated dirty data on flash- SSDs. We also balanced the write endurance of different flash-SSDs. As a result, no single SSD will fail much earlier than the others. Thirdly, when using PCM-like devices only as data storage, it’s possible to exploit memory management hardware resources to improve file system performance. However, in this case, PCM may share critical system resources such as the TLB, page table with DRAM which can potentially impact PCM’s performance. To solve this problem, we proposed to employ superpages to reduce the pressure on memory management resources. As a result, the file system performance is further improved

Algorithm-Directed Crash Consistence in Non-Volatile Memory for HPC

Fault tolerance is one of the major design goals for HPC. The emergence of non-volatile memories (NVM) provides a solution to build fault tolerant HPC. Data in NVM-based main memory are not lost when the system crashes because of the non-volatility nature of NVM. However, because of volatile caches, data must be logged and explicitly flushed from caches into NVM to ensure consistence and correctness before crashes, which can cause large runtime overhead. In this paper, we introduce an algorithm-based method to establish crash consistence in NVM for HPC applications. We slightly extend application data structures or sparsely flush cache blocks, which introduce ignorable runtime overhead. Such extension or cache flushing allows us to use algorithm knowledge to \textit{reason} data consistence or correct inconsistent data when the application crashes. We demonstrate the effectiveness of our method for three algorithms, including an iterative solver, dense matrix multiplication, and Monte-Carlo simulation. Based on comprehensive performance evaluation on a variety of test environments, we demonstrate that our approach has very small runtime overhead (at most 8.2\% and less than 3\% in most cases), much smaller than that of traditional checkpoint, while having the same or less recomputation cost.Comment: 12 page

HMC-Based Accelerator Design For Compressed Deep Neural Networks

Deep Neural Networks (DNNs) offer remarkable performance of classifications and regressions in many high dimensional problems and have been widely utilized in real-word cognitive applications. In DNN applications, high computational cost of DNNs greatly hinder their deployment in resource-constrained applications, real-time systems and edge computing platforms. Moreover, energy consumption and performance cost of moving data between memory hierarchy and computational units are higher than that of the computation itself. To overcome the memory bottleneck, data locality and temporal data reuse are improved in accelerator design. In an attempt to further improve data locality, memory manufacturers have invented 3D-stacked memory where multiple layers of memory arrays are stacked on top of each other. Inherited from the concept of Process-In-Memory (PIM), some 3D-stacked memory architectures also include a logic layer that can integrate general-purpose computational logic directly within main memory to take advantages of high internal bandwidth during computation. In this dissertation, we are going to investigate hardware/software co-design for neural network accelerator. Specifically, we introduce a two-phase filter pruning framework for model compression and an accelerator tailored for efficient DNN execution on HMC, which can dynamically offload the primitives and functions to PIM logic layer through a latency-aware scheduling controller. In our compression framework, we formulate filter pruning process as an optimization problem and propose a filter selection criterion measured by conditional entropy. The key idea of our proposed approach is to establish a quantitative connection between filters and model accuracy. We define the connection as conditional entropy over filters in a convolutional layer, i.e., distribution of entropy conditioned on network loss. Based on the definition, different pruning efficiencies of global and layer-wise pruning strategies are compared, and two-phase pruning method is proposed. The proposed pruning method can achieve a reduction of 88% filters and 46% inference time reduction on VGG16 within 2% accuracy degradation. In this dissertation, we are going to investigate hardware/software co-design for neural network accelerator. Specifically, we introduce a two-phase filter pruning framework for model compres- sion and an accelerator tailored for efficient DNN execution on HMC, which can dynamically offload the primitives and functions to PIM logic layer through a latency-aware scheduling con- troller. In our compression framework, we formulate filter pruning process as an optimization problem and propose a filter selection criterion measured by conditional entropy. The key idea of our proposed approach is to establish a quantitative connection between filters and model accuracy. We define the connection as conditional entropy over filters in a convolutional layer, i.e., distribution of entropy conditioned on network loss. Based on the definition, different pruning efficiencies of global and layer-wise pruning strategies are compared, and two-phase pruning method is proposed. The proposed pruning method can achieve a reduction of 88% filters and 46% inference time reduction on VGG16 within 2% accuracy degradation

Leveraging Non-Volatile Memory in Modern Storage Management Architectures

Non-volatile memory technologies (NVM) introduce a novel class of devices that combine characteristics of both storage and main memory. Like storage, NVM is not only persistent, but also denser and cheaper than DRAM. Like DRAM, NVM is byte-addressable and has lower access latency. In recent years, NVM has gained a lot of attention both in academia and in the data management industry, with views ranging from skepticism to over excitement. Some critics claim that NVM is not cheap enough to replace flash-based SSDs nor is it fast enough to replace DRAM, while others see it simply as a storage device. Supporters of NVM have observed that its low latency and byte-addressability requires radical changes and a complete rewrite of storage management architectures. This thesis takes a moderate stance between these two views. We consider that, while NVM might not replace flash-based SSD or DRAM in the near future, it has the potential to reduce the gap between them. Furthermore, treating NVM as a regular storage media does not fully leverage its byte-addressability and low latency. On the other hand, completely redesigning systems to be NVM-centric is impractical. Proposals that attempt to leverage NVM to simplify storage management result in completely new architectures that face the same challenges that are already well-understood and addressed by the traditional architectures. Therefore, we take three common storage management architectures as a starting point, and propose incremental changes to enable them to better leverage NVM. First, in the context of log-structured merge-trees, we investigate the impact of storing data in NVM, and devise methods to enable small granularity accesses and NVM-aware caching policies. Second, in the context of B+Trees, we propose to extend the buffer pool and describe a technique based on the concept of optimistic consistency to handle corrupted pages in NVM. Third, we employ NVM to enable larger capacity and reduced costs in a index+log key-value store, and combine it with other techniques to build a system that achieves low tail latency. This thesis aims to describe and evaluate these techniques in order to enable storage management architectures to leverage NVM and achieve increased performance and lower costs, without major architectural changes.:1 Introduction 1.1 Non-Volatile Memory 1.2 Challenges 1.3 Non-Volatile Memory & Database Systems 1.4 Contributions and Outline 2 Background 2.1 Non-Volatile Memory 2.1.1 Types of NVM 2.1.2 Access Modes 2.1.3 Byte-addressability and Persistency 2.1.4 Performance 2.2 Related Work 2.3 Case Study: Persistent Tree Structures 2.3.1 Persistent Trees 2.3.2 Evaluation 3 Log-Structured Merge-Trees 3.1 LSM and NVM 3.2 LSM Architecture 3.2.1 LevelDB 3.3 Persistent Memory Environment 3.4 2Q Cache Policy for NVM 3.5 Evaluation 3.5.1 Write Performance 3.5.2 Read Performance 3.5.3 Mixed Workloads 3.6 Additional Case Study: RocksDB 3.6.1 Evaluation 4 B+Trees 4.1 B+Tree and NVM 4.1.1 Category #1: Buffer Extension 4.1.2 Category #2: DRAM Buffered Access 4.1.3 Category #3: Persistent Trees 4.2 Persistent Buffer Pool with Optimistic Consistency 4.2.1 Architecture and Assumptions 4.2.2 Embracing Corruption 4.3 Detecting Corruption 4.3.1 Embracing Corruption 4.4 Repairing Corruptions 4.5 Performance Evaluation and Expectations 4.5.1 Checksums Overhead 4.5.2 Runtime and Recovery 4.6 Discussion 5 Index+Log Key-Value Stores 5.1 The Case for Tail Latency 5.2 Goals and Overview 5.3 Execution Model 5.3.1 Reactive Systems and Actor Model 5.3.2 Message-Passing Communication 5.3.3 Cooperative Multitasking 5.4 Log-Structured Storage 5.5 Networking 5.6 Implementation Details 5.6.1 NVM Allocation on RStore 5.6.2 Log-Structured Storage and Indexing 5.6.3 Garbage Collection 5.6.4 Logging and Recovery 5.7 Systems Operations 5.8 Evaluation 5.8.1 Methodology 5.8.2 Environment 5.8.3 Other Systems 5.8.4 Throughput Scalability 5.8.5 Tail Latency 5.8.6 Scans 5.8.7 Memory Consumption 5.9 Related Work 6 Conclusion Bibliography A PiBenc