A comprehensive comparison between design for testability techniques for total dose testing of flash-based FPGAs

Radiation sources exist in different kinds of environments where electronic devices often operate. Correct device operation is usually affected negatively by radiation. The radiation resultant effect manifests in several forms depending on the operating environment of the device like total ionizing dose effect (TID), or single event effects (SEEs) such as single event upset (SEU), single event gate rupture (SEGR), and single event latch up (SEL). CMOS circuits and Floating gate MOS circuits suffer from an increase in the delay and the leakage current due to TID effect. This may damage the proper operation of the integrated circuit. Exhaustive testing is needed for devices operating in harsh conditions like space and military applications to ensure correct operations in the worst circumstances. The use of worst case test vectors (WCTVs) for testing is strongly recommended by MIL-STD-883, method 1019, which is the standard describing the procedure for testing electronic devices under radiation. However, the difficulty of generating these test vectors hinders their use in radiation testing. Testing digital circuits in the industry is usually done nowadays using design for testability (DFT) techniques as they are very mature and can be relied on. DFT techniques include, but not limited to, ad-hoc technique, built-in self test (BIST), muxed D scan, clocked scan and enhanced scan. DFT is usually used with automatic test patterns generation (ATPG) software to generate test vectors to test application specific integrated circuits (ASICs), especially with sequential circuits, against faults like stuck at faults and path delay faults. Despite all these recommendations for DFT, radiation testing has not benefited from this reliable technology yet. Also, with the big variation in the DFT techniques, choosing the right technique is the bottleneck to achieve the best results for TID testing. In this thesis, a comprehensive comparison between different DFT techniques for TID testing of flash-based FPGAs is made to help designers choose the best suitable DFT technique depending on their application. The comparison includes muxed D scan technique, clocked scan technique and enhanced scan technique. The comparison is done using ISCAS-89 benchmarks circuits. Points of comparisons include FPGA resources utilization, difficulty of designs bring-up, added delay by DFT logic and robust testable paths in each technique

Interconnect yield analysis and fault tolerance for field programmable gate arrays

Imperial Users onl

Evaluation of advanced techniques for structural FPGA self-test

This thesis presents a comprehensive test generation framework for FPGA logic elements and interconnects. It is based on and extends the current state-of-the-art. The purpose of FPGA testing in this work is to achieve reliable reconfiguration for a FPGA-based runtime reconfigurable system. A pre-configuration test is performed on a portion of the FPGA before it is reconfigured as part of the system to ensure that the FPGA fabric is fault-free. The implementation platform is the Xilinx Virtex-5 FPGA family. Existing literature in FPGA testing is evaluated and reviewed thoroughly. The various approaches are compared against one another qualitatively and the approach most suitable to the target platform is chosen. The array testing method is employed in testing the FPGA logic for its low hardware overhead and optimal test time. All tests are additionally pipelined to reduce test application time and use a high test clock frequency. A hybrid fault model including both structural and functional faults is assumed. An algorithm for the optimization of the number of required FPGA test configurations is developed and implemented in Java using a pseudo-random set-covering heuristic. Optimal solutions are obtained for Virtex-5 logic slices. The algorithm effort is parameterizable with the number of loop iterations each of which take approximately one second for a Virtex-5 sliceL circuit. A flexible test architecture for interconnects is developed. Arbitrary wire types can be tested in the same test configuration with no hardware overhead. Furthermore, a routing algorithm is integrated with the test template generation to select the wires under test and route them appropriately. Nine test configurations are required to achieve full test coverage for the FPGA logic. For interconnect testing, a local router-based on depth-first graph traversal is implemented in Java as the basis for creating systematic interconnect test templates. Pent wire testing is additionally implemented as a proof of concept. The test clock frequency for all tests exceeds 170 MHz and the hardware overhead is always lower than seven CLBs. All implemented tests are parameterizable such that they can be applied to any portion of the FPGA regardless of size or position

Identifying worst case test vectors for FPGA exposed to total ionization dose using design for testability techniques

Electronic devices often operate in harsh environments which contain a variation of radiation sources. Radiation may cause different kinds of damage to proper operation of the devices. Their sources can be found in terrestrial environments, or in extra-terrestrial environments like in space, or in man-made radiation sources like nuclear reactors, biomedical devices and high energy particles physics experiments equipment. Depending on the operation environment of the device, the radiation resultant effect manifests in several forms like total ionizing dose effect (TID), or single event effects (SEEs) such as single event upset (SEU), single event gate rupture (SEGR), and single event latch up (SEL). TID effect causes an increase in the delay and the leakage current of CMOS circuits which may damage the proper operation of the integrated circuit. To ensure proper operation of these devices under radiation, thorough testing must be made especially in critical applications like space and military applications. Although the standard which describes the procedure for testing electronic devices under radiation emphasizes the use of worst case test vectors (WCTVs), they are never used in radiation testing due to the difficulty of generating these vectors for circuits under test. For decades, design for testability (DFT) has been the best choice for test engineers to test digital circuits in industry. It has become a very mature technology that can be relied on. DFT is usually used with automatic test patterns generation (ATPG) software to generate test vectors to test application specific integrated circuits (ASICs), especially with sequential circuits, against faults like stuck at faults and path delay faults. Surprisingly, however, radiation testing has not yet made use of this reliable technology. In this thesis, a novel methodology is proposed to extend the usage of DFT to generate WCTVs for delay failure in Flash based field programmable gate arrays (FPGAs) exposed to total ionizing dose (TID). The methodology is validated using MicroSemi ProASIC3 FPGA and cobalt 60 facility

Test and Diagnosis of Integrated Circuits

The ever-increasing growth of the semiconductor market results in an increasing complexity of digital circuits. Smaller, faster, cheaper and low-power consumption are the main challenges in semiconductor industry. The reduction of transistor size and the latest packaging technology (i.e., System-On-a-Chip, System-In-Package, Trough Silicon Via 3D Integrated Circuits) allows the semiconductor industry to satisfy the latest challenges. Although producing such advanced circuits can benefit users, the manufacturing process is becoming finer and denser, making chips more prone to defects.The work presented in the HDR manuscript addresses the challenges of test and diagnosis of integrated circuits. It covers:- Power aware test;- Test of Low Power Devices;- Fault Diagnosis of digital circuits

Detection of hard faults in combinational logic circuits

ABSTRACT: Previous Work in identifying hard to test faults (HFs) -- The effect of reconvergent fanout and redundancy -- Testability measures (TMs)Using of ATPGs to detect HFs -- Previous use of cost in Testability analysis -- Review of automatic test pattern generation (ATPG) -- Fault modelling -- Single versus multiple path sensitization -- The four ATPG phases of deterministic gate level test generation -- Random test pattern generation and hybrid methods -- Review of the fan algorithm -- Backtrack reduction methods and the importance of heuristics -- Mixed graph -- binary decision diagram (GBDD) circuit model -- A review of graph techniques -- A review of binary decisions diagrams (BDDs) techniques -- gBDD -- graph binary decision diagrams -- Detection of hard faults using HUB -- Introduction to budgetary constraints -- The HUB algorithm -- Important HUB attributes -- Circuits characteristics of used for results -- Comparison of gBDD -- ATPG related results -- Fault simulation related results -- Hard fault detection

Targeted Proteolysis of Plectin Isoform 1a Accounts for Hemidesmosome Dysfunction in Mice Mimicking the Dominant Skin Blistering Disease EBS-Ogna

Autosomal recessive mutations in the cytolinker protein plectin account for the multisystem disorders epidermolysis bullosa simplex (EBS) associated with muscular dystrophy (EBS-MD), pyloric atresia (EBS-PA), and congenital myasthenia (EBS-CMS). In contrast, a dominant missense mutation leads to the disease EBS-Ogna, manifesting exclusively as skin fragility. We have exploited this trait to study the molecular basis of hemidesmosome failure in EBS-Ogna and to reveal the contribution of plectin to hemidesmosome homeostasis. We generated EBS-Ogna knock-in mice mimicking the human phenotype and show that blistering reflects insufficient protein levels of the hemidesmosome-associated plectin isoform 1a. We found that plectin 1a, in contrast to plectin 1c, the major isoform expressed in epidermal keratinocytes, is proteolytically degraded, supporting the notion that degradation of hemidesmosome-anchored plectin is spatially controlled. Using recombinant proteins, we show that the mutation renders plectin's 190-nm-long coiled-coil rod domain more vulnerable to cleavage by calpains and other proteases activated in the epidermis but not in skeletal muscle. Accordingly, treatment of cultured EBS-Ogna keratinocytes as well as of EBS-Ogna mouse skin with calpain inhibitors resulted in increased plectin 1a protein expression levels. Moreover, we report that plectin's rod domain forms dimeric structures that can further associate laterally into remarkably stable (paracrystalline) polymers. We propose focal self-association of plectin molecules as a novel mechanism contributing to hemidesmosome homeostasis and stabilization