A new approach in building parallel finite field multipliers

A new method for building bit-parallel polynomial basis finite field multipliers is proposed in this thesis. Among the different approaches to build such multipliers, Mastrovito multipliers based on a trinomial, an all-one-polynomial, or an equally-spacedpolynomial have the lowest complexities. The next best in this category is a conventional multiplier based on a pentanomial. Any newly presented method should have complexity results which are at least better than those of a pentanomial based multiplier. By applying our method to certain classes of finite fields we have gained a space complexity as n2 + H - 4 and a time complexity as TA + ([ log2(n-l) ]+3)rx which are better than the lowest space and time complexities of a pentanomial based multiplier found in literature. Therefore this multiplier can serve as an alternative in those finite fields in which no trinomial, all-one-polynomial or equally-spaced-polynomial exists

Area- Efficient VLSI Implementation of Serial-In Parallel-Out Multiplier Using Polynomial Representation in Finite Field GF(2m)

Finite field multiplier is mainly used in elliptic curve cryptography, error-correcting codes and signal processing. Finite field multiplier is regarded as the bottleneck arithmetic unit for such applications and it is the most complicated operation over finite field GF(2m) which requires a huge amount of logic resources. In this paper, a new modified serial-in parallel-out multiplication algorithm with interleaved modular reduction is suggested. The proposed method offers efficient area architecture as compared to proposed algorithms in the literature. The reduced finite field multiplier complexity is achieved by means of utilizing logic NAND gate in a particular architecture. The efficiency of the proposed architecture is evaluated based on criteria such as time (latency, critical path) and space (gate-latch number) complexity. A detailed comparative analysis indicates that, the proposed finite field multiplier based on logic NAND gate outperforms previously known resultsComment: 19 pages, 4 figure

High speed world level finite field multipliers in F2m

Finite fields have important applications in number theory, algebraic geometry, Galois theory, cryptography, and coding theory. Recently, the use of finite field arithmetic in the area of cryptography has increasingly gained importance. Elliptic curve and El-Gamal cryptosystems are two important examples of public key cryptosystems widely used today based on finite field arithmetic. Research in this area is moving toward finding new architectures to implement the arithmetic operations more efficiently. Two types of finite fields are commonly used in practice, prime field GF(p) and the binary extension field GF(2 m). The binary extension fields are attractive for high speed cryptography applications since they are suitable for hardware implementations. Hardware implementation of finite field multipliers can usually be categorized into three categories: bit-serial, bit-parallel, and word-level architectures. The word-level multipliers provide architectural flexibility and trade-off between the performance and limitations of VLSI implementation and I/O ports, thus it is of more practical significance. In this work, different word level architectures for multiplication using binary field are proposed. It has been shown that the proposed architectures are more efficient compared to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology, to similar proposals considering area/delay complexities as a measure of performance. Practical size multipliers for cryptography applications have been realized in hardware using FPGA or standard CMOS technology. Also different VLSI implementations for multipliers were explored which resulted in more efficient implementations for some of the regular architectures. The new implementations use a simple module designed in domino logic as the main building block for the multiplier. Significant speed improvements was achieved designing practical size multipliers using the proposed methodology

Efficient Arithmetic for the Implementation of Elliptic Curve Cryptography

The technology of elliptic curve cryptography is now an important branch in public-key based crypto-system. Cryptographic mechanisms based on elliptic curves depend on the arithmetic of points on the curve. The most important arithmetic is multiplying a point on the curve by an integer. This operation is known as elliptic curve scalar (or point) multiplication operation. A cryptographic device is supposed to perform this operation efficiently and securely. The elliptic curve scalar multiplication operation is performed by combining the elliptic curve point routines that are defined in terms of the underlying finite field arithmetic operations. This thesis focuses on hardware architecture designs of elliptic curve operations. In the first part, we aim at finding new architectures to implement the finite field arithmetic multiplication operation more efficiently. In this regard, we propose novel schemes for the serial-out bit-level (SOBL) arithmetic multiplication operation in the polynomial basis over F_2^m. We show that the smallest SOBL scheme presented here can provide about 26-30\% reduction in area-complexity cost and about 22-24\% reduction in power consumptions for F_2^{163} compared to the current state-of-the-art bit-level multiplier schemes. Then, we employ the proposed SOBL schemes to present new hybrid-double multiplication architectures that perform two multiplications with latency comparable to the latency of a single multiplication. Then, in the second part of this thesis, we investigate the different algorithms for the implementation of elliptic curve scalar multiplication operation. We focus our interest in three aspects, namely, the finite field arithmetic cost, the critical path delay, and the protection strength from side-channel attacks (SCAs) based on simple power analysis. In this regard, we propose a novel scheme for the scalar multiplication operation that is based on processing three bits of the scalar in the exact same sequence of five point arithmetic operations. We analyse the security of our scheme and show that its security holds against both SCAs and safe-error fault attacks. In addition, we show how the properties of the proposed elliptic curve scalar multiplication scheme yields an efficient hardware design for the implementation of a single scalar multiplication on a prime extended twisted Edwards curve incorporating 8 parallel multiplication operations. Our comparison results show that the proposed hardware architecture for the twisted Edwards curve model implemented using the proposed scalar multiplication scheme is the fastest secure SCA protected scalar multiplication scheme over prime field reported in the literature

Efficient Bit-parallel Multiplication with Subquadratic Space Complexity in Binary Extension Field

Bit-parallel multiplication in GF(2^n) with subquadratic space complexity has been explored in recent years due to its lower area cost compared with traditional parallel multiplications. Based on \u27divide and conquer\u27 technique, several algorithms have been proposed to build subquadratic space complexity multipliers. Among them, Karatsuba algorithm and its generalizations are most often used to construct multiplication architectures with significantly improved efficiency. However, recursively using one type of Karatsuba formula may not result in an optimal structure for many finite fields. It has been shown that improvements on multiplier complexity can be achieved by using a combination of several methods. After completion of a detailed study of existing subquadratic multipliers, this thesis has proposed a new algorithm to find the best combination of selected methods through comprehensive search for constructing polynomial multiplication over GF(2^n). Using this algorithm, ameliorated architectures with shortened critical path or reduced gates cost will be obtained for the given value of n, where n is in the range of [126, 600] reflecting the key size for current cryptographic applications. With different input constraints the proposed algorithm can also yield subquadratic space multiplier architectures optimized for trade-offs between space and time. Optimized multiplication architectures over NIST recommended fields generated from the proposed algorithm are presented and analyzed in detail. Compared with existing works with subquadratic space complexity, the proposed architectures are highly modular and have improved efficiency on space or time complexity. Finally generalization of the proposed algorithm to be suitable for much larger size of fields discussed

Hardware Implementations for Symmetric Key Cryptosystems

The utilization of global communications network for supporting new electronic applications is growing. Many applications provided over the global communications network involve exchange of security-sensitive information between different entities. Often, communicating entities are located at different locations around the globe. This demands deployment of certain mechanisms for providing secure communications channels between these entities. For this purpose, cryptographic algorithms are used by many of today\u27s electronic applications to maintain security. Cryptographic algorithms provide set of primitives for achieving different security goals such as: confidentiality, data integrity, authenticity, and non-repudiation. In general, two main categories of cryptographic algorithms can be used to accomplish any of these security goals, namely, asymmetric key algorithms and symmetric key algorithms. The security of asymmetric key algorithms is based on the hardness of the underlying computational problems, which usually require large overhead of space and time complexities. On the other hand, the security of symmetric key algorithms is based on non-linear transformations and permutations, which provide efficient implementations compared to the asymmetric key ones. Therefore, it is common to use asymmetric key algorithms for key exchange, while symmetric key counterparts are deployed in securing the communications sessions. This thesis focuses on finding efficient hardware implementations for symmetric key cryptosystems targeting mobile communications and resource constrained applications. First, efficient lightweight hardware implementations of two members of the Welch-Gong (WG) family of stream ciphers, the WG$\left(29,11\right)$ and WG-$16$, are considered for the mobile communications domain. Optimizations in the WG$\left(29,11\right)$ stream cipher are considered when the $GF\left(2^{29}\right)$ elements are represented in either the Optimal normal basis type-II (ONB-II) or the Polynomial basis (PB). For WG-$16$, optimizations are considered only for PB representations of the $GF\left(2^{16}\right)$ elements. In this regard, optimizations for both ciphers are accomplished mainly at the arithmetic level through reducing the number of field multipliers, based on novel trace properties. In addition, other optimization techniques such as serialization and pipelining, are also considered. After this, the thesis explores efficient hardware implementations for digit-level multiplication over binary extension fields $GF\left(2^{m}\right)$. Efficient digit-level $GF\left(2^{m}\right)$ multiplications are advantageous for ultra-lightweight implementations, not only in symmetric key algorithms, but also in asymmetric key algorithms. The thesis introduces new architectures for digit-level $GF\left(2^{m}\right)$ multipliers considering the Gaussian normal basis (GNB) and PB representations of the field elements. The new digit-level $GF\left(2^{m}\right)$ single multipliers do not require loading of the two input field elements in advance to computations. This feature results in high throughput fast multiplication in resource constrained applications with limited capacity of input data-paths. The new digit-level $GF\left(2^{m}\right)$ single multipliers are considered for both the GNB and PB. In addition, for the GNB representation, new architectures for digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple multipliers are introduced. The new digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple GNB multipliers, respectively, accomplish the multiplication of three and four field elements using the latency required for multiplying two field elements. Furthermore, a new hardware architecture for the eight-ary exponentiation scheme is proposed by utilizing the new digit-level $GF\left(2^{m}\right)$ hybrid-triple GNB multipliers

Optimizing scalar multiplication for koblitz curves using hybrid FPGAs

Elliptic curve cryptography (ECC) is a type of public-key cryptosystem which uses the additive group of points on a nonsingular elliptic curve as a cryptographic medium. Koblitz curves are special elliptic curves that have unique properties which allow scalar multiplication, the bottleneck operation in most ECC cryptosystems, to be performed very efficiently. Optimizing the scalar multiplication operation on Koblitz curves is an active area of research with many proposed algorithms for FPGA and software implementations. As of yet little to no research has been reported on using the capabilities of hybrid FPGAs, such as the Xilinx Virtex-4 FX series, which would allow for the design of a more flexible single-chip system that performs scalar multiplication and is not constrained by high communication costs between hardware and software. While the results obtained in this thesis were competitive with many other FPGA implementations, the most recent research efforts have produced significantly faster FPGA based systems. These systems were created by utilizing new and interesting approaches to improve the runtime of performing scalar multiplication on Koblitz curves and thus significantly outperformed the results obtained in this thesis. However, this thesis also functioned as a comparative study of the usage of different basis representations and proved that strict polynomial basis approaches can compete with strict normal basis implementations when performing scalar multiplication on Koblitz curves

Efficient Implementation of Elliptic Curve Cryptography on FPGAs

This work presents the design strategies of an FPGA-based elliptic curve co-processor. Elliptic curve cryptography is an important topic in cryptography due to its relatively short key length and higher efficiency as compared to other well-known public key crypto-systems like RSA. The most important contributions of this work are: - Analyzing how different representations of finite fields and points on elliptic curves effect the performance of an elliptic curve co-processor and implementing a high performance co-processor. - Proposing a novel dynamic programming approach to find the optimum combination of different recursive polynomial multiplication methods. Here optimum means the method which has the smallest number of bit operations. - Designing a new normal-basis multiplier which is based on polynomial multipliers. The most important part of this multiplier is a circuit of size $O(n \log n)$ for changing the representation between polynomial and normal basis