A Comprehensive Investigation of Beam Management Through Conventional and Deep Learning Approach

5G spectrum uses cutting-edge technology which delivers high data rates, low latency, increased capacity, and high spectrum utilization. To cater to these requirements various technologies are available such as Multiple Access Technology (MAT), Multiple Input Multiple Output technology (MIMO), Millimetre (mm) wave technology, Non-Orthogonal Multiple Access Technology (NOMA), Simultaneous Wireless Information and Power Transfer (SWIPT). Of all available technologies, mmWave is prominent as it provides favorable opportunities for 5G. Millimeter-wave is capable of providing a high data rate i.e., 10 Gbit/sec. Also, a tremendous amount of raw bandwidth is available i.e., around 250 GHz, which is an attractive characteristic of the mmWave band to relieve mobile data traffic congestion in the low frequency band. It has a high frequency i.e., 30 – 300 GHz, giving very high speed. It has a very short wavelength i.e., 1-10mm, because of this it provides the compact size of the component. It will provide a throughput of up to 20 Gbps. It has narrow beams and will increase security and reduce interference. When the main beam of the transmitter and receiver are not aligned properly there is a problem in ideal communication. To solve this problem beam management is one of the solutions to form a strong communication link between transmitter and receiver. This paper aims to address challenges in beam management and proposes a framework for realization. Towards the same, the paper initially introduces various challenges in beam management. Towards building an effective beam management system when a user is moving, various steps are present like beam selection, beam tracking, beam alignment, and beam forming. Hence the subsequent sections of the paper illustrate various beam management procedures in mmWave using conventional methods as well as using deep learning techniques. The paper also presents a case study on the framework's implementation using the above-mentioned techniques in mmWave communication. Also glimpses on future research directions are detailed in the final sections. Such beam management techniques when used for mmWave technology will enable build fast, efficient, and capable 5G networks

Millimeter-wave Evolution for 5G Cellular Networks

Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular network requires evolution to increase the system rate 1000 times higher than the current systems in 10 years. Motivated by this common problem, there are several studies to integrate mm-wave access into current cellular networks as multi-band heterogeneous networks to exploit the ultra-wideband aspect of the mm-wave band. The authors of this paper have proposed comprehensive architecture of cellular networks with mm-wave access, where mm-wave small cell basestations and a conventional macro basestation are connected to Centralized-RAN (C-RAN) to effectively operate the system by enabling power efficient seamless handover as well as centralized resource control including dynamic cell structuring to match the limited coverage of mm-wave access with high traffic user locations via user-plane/control-plane splitting. In this paper, to prove the effectiveness of the proposed 5G cellular networks with mm-wave access, system level simulation is conducted by introducing an expected future traffic model, a measurement based mm-wave propagation model, and a centralized cell association algorithm by exploiting the C-RAN architecture. The numerical results show the effectiveness of the proposed network to realize 1000 times higher system rate than the current network in 10 years which is not achieved by the small cells using commonly considered 3.5 GHz band. Furthermore, the paper also gives latest status of mm-wave devices and regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions on Communications. (Mar. 2015

Hybrid Precoding for Multiuser Millimeter Wave Massive MIMO Systems : A Deep Learning Approach

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.In multi-user millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems, hybrid precoding is a crucial task to lower the complexity and cost while achieving a sufficient sum-rate. Previous works on hybrid precoding were usually based on optimization or greedy approaches. These methods either provide higher complexity or have sub-optimum performance. Moreover, the performance of these methods mostly relies on the quality of the channel data. In this work, we propose a deep learning (DL) framework to improve the performance and provide less computation time as compared to conventional techniques. In fact, we design a convolutional neural network for MIMO (CNN-MIMO) that accepts as input an imperfect channel matrix and gives the analog precoder and combiners at the output. The procedure includes two main stages. First, we develop an exhaustive search algorithm to select the analog precoder and combiners from a predefined codebook maximizing the achievable sum-rate. Then, the selected precoder and combiners are used as output labels in the training stage of CNN-MIMO where the input-output pairs are obtained. We evaluate the performance of the proposed method through numerous and extensive simulations and show that the proposed DL framework outperforms conventional techniques. Overall, CNN-MIMO provides a robust hybrid precoding scheme in the presence of imperfections regarding the channel matrix. On top of this, the proposed approach exhibits less computation time with comparison to the optimization and codebook based approaches.Peer reviewe

MAC Protocols for Wireless Mesh Networks with Multi-beam Antennas: A Survey

Multi-beam antenna technologies have provided lots of promising solutions to many current challenges faced in wireless mesh networks. The antenna can establish several beamformings simultaneously and initiate concurrent transmissions or receptions using multiple beams, thereby increasing the overall throughput of the network transmission. Multi-beam antenna has the ability to increase the spatial reuse, extend the transmission range, improve the transmission reliability, as well as save the power consumption. Traditional Medium Access Control (MAC) protocols for wireless network largely relied on the IEEE 802.11 Distributed Coordination Function(DCF) mechanism, however, IEEE 802.11 DCF cannot take the advantages of these unique capabilities provided by multi-beam antennas. This paper surveys the MAC protocols for wireless mesh networks with multi-beam antennas. The paper first discusses some basic information in designing multi-beam antenna system and MAC protocols, and then presents the main challenges for the MAC protocols in wireless mesh networks compared with the traditional MAC protocols. A qualitative comparison of the existing MAC protocols is provided to highlight their novel features, which provides a reference for designing the new MAC protocols. To provide some insights on future research, several open issues of MAC protocols are discussed for wireless mesh networks using multi-beam antennas.Comment: 22 pages, 6 figures, Future of Information and Communication Conference (FICC) 2019, https://doi.org/10.1007/978-3-030-12388-8_

Optimal Multiuser Transmit Beamforming: A Difficult Problem with a Simple Solution Structure

Transmit beamforming is a versatile technique for signal transmission from an array of $N$ antennas to one or multiple users [1]. In wireless communications, the goal is to increase the signal power at the intended user and reduce interference to non-intended users. A high signal power is achieved by transmitting the same data signal from all antennas, but with different amplitudes and phases, such that the signal components add coherently at the user. Low interference is accomplished by making the signal components add destructively at non-intended users. This corresponds mathematically to designing beamforming vectors (that describe the amplitudes and phases) to have large inner products with the vectors describing the intended channels and small inner products with non-intended user channels. While it is fairly easy to design a beamforming vector that maximizes the signal power at the intended user, it is difficult to strike a perfect balance between maximizing the signal power and minimizing the interference leakage. In fact, the optimization of multiuser transmit beamforming is generally a nondeterministic polynomial-time (NP) hard problem [2]. Nevertheless, this lecture shows that the optimal transmit beamforming has a simple structure with very intuitive properties and interpretations. This structure provides a theoretical foundation for practical low-complexity beamforming schemes. (See this lecture note for the complete abstract/introduction)Comment: Accepted for publication as lecture note in IEEE Signal Processing Magazine, 11 pages, 3 figures. The results can be reproduced using the following Matlab code: https://github.com/emilbjornson/optimal-beamformin

Optimal Signaling of MISO Full-Duplex Two-Way Wireless Channel

We model the self-interference in a multiple input single output (MISO) full-duplex two-way channel and evaluate the achievable rate region. We formulate the boundary of the achievable rate region termed as the Pareto boundary by a family of coupled, non-convex optimization problems. Our main contribution is decoupling and reformulating the original non-convex optimization problems to a family of convex semidefinite programming problems. For a MISO full-duplex two-way channel, we prove that beamforming is an optimal transmission strategy which can achieve any point on the Pareto boundary. Furthermore, we present a closed-form expression for the optimal beamforming weights. In our numerical examples we quantify gains in the achievable rates of the proposed beamforming over the zero-forcing beamforming.Comment: To appear in IEEE ICC 2015, London, U

Spectrum Sharing in Wireless Networks via QoS-Aware Secondary Multicast Beamforming

Secondary spectrum usage has the potential to considerably increase spectrum utilization. In this paper, quality-of-service (QoS)-aware spectrum underlay of a secondary multicast network is considered. A multiantenna secondary access point (AP) is used for multicast (common information) transmission to a number of secondary single-antenna receivers. The idea is that beamforming can be used to steer power towards the secondary receivers while limiting sidelobes that cause interference to primary receivers. Various optimal formulations of beamforming are proposed, motivated by different ldquocohabitationrdquo scenarios, including robust designs that are applicable with inaccurate or limited channel state information at the secondary AP. These formulations are NP-hard computational problems; yet it is shown how convex approximation-based multicast beamforming tools (originally developed without regard to primary interference constraints) can be adapted to work in a spectrum underlay context. Extensive simulation results demonstrate the effectiveness of the proposed approaches and provide insights on the tradeoffs between different design criteria