Beacon delivery over practical V2X channels

International audienceThe problem of modelling V2X system based on partial (RSSI) measurements of the wireless propagation channel is considered. The study shows that the dual slope linear model well approximates pathloss in the V2X systems. We also show that in addition to distance dependent pathloss, incorporation of fast fading as well as its frequency selectivity have significant effect on the overall performance of the system. Interference from simultaneous transmissions is estimated based on medium access control (MAC) and realistic road traffic models. Our simulation results show how car traffic parameters and MAC behavior provide direct impact on the effective communication range of the V2X system

Agile Calibration Process of Full-Stack Simulation Frameworks for V2X Communications

Computer simulations and real-world car trials are essential to investigate the performance of Vehicle-to-Everything (V2X) networks. However, simulations are imperfect models of the physical reality and can be trusted only when they indicate agreement with the real-world. On the other hand, trials lack reproducibility and are subject to uncertainties and errors. In this paper, we will illustrate a case study where the interrelationship between trials, simulation, and the reality-of-interest is presented. Results are then compared in a holistic fashion. Our study will describe the procedure followed to macroscopically calibrate a full-stack network simulator to conduct high-fidelity full-stack computer simulations.Comment: To appear in IEEE VNC 2017, Torino, I

L-Platooning: A Protocol for Managing a Long Platoon with DSRC

Vehicle platooning is an automated driving technology that enables a group of vehicles to travel very closely together as a single unit to improve fuel efficiency and driver safety and reduces CO2 emission. The significant benefits of platooning attracted huge interests from academia and industry, especially from logistics companies for utilizing platoons of "long-body" trailer trucks because of the huge cost savings. In this paper, we demonstrate that existing DSRC-based platooning solutions, however, fail to support formation of such "long" platoons consisting of typical trailer trucks because of the limited communication range of DSRC. To address this problem, we propose L-Platooning, the first platooning protocol that enables seamless, reliable, and rapid formation of a long platoon. We introduce a novel concept called Virtual Leader that refers to a vehicle that acts like a platoon leader to extend the coverage of the original platoon leader. A virtual leader election algorithm is developed to effectively designate a virtual leader based on the novel metric called the Virtual Leader Quality Index (VLQI) which quantifies the effectiveness of a vehicle serving as a platoon leader. We also develop mechanisms for L-Platooning to support the vehicle join and leave maneuvers specifically for a long platoon. Through extensive simulations using the combination of Veins (Plexe) and SUMO, we demonstrate that L-Platooning enables long-body trailer trucks to form a long platoon effectively and maintain the desired inter-vehicle distance precisely. We also show that L-Platooning handles seamlessly the vehicle join and leave maneuvers for a long platoon.Comment: Published in IEEE Transactions on Intelligent Transportation System

A survey on vehicular communication for cooperative truck platooning application

Platooning is an application where a group of vehicles move one after each other in close proximity, acting jointly as a single physical system. The scope of platooning is to improve safety, reduce fuel consumption, and increase road use efficiency. Even if conceived several decades ago as a concept, based on the new progress in automation and vehicular networking platooning has attracted particular attention in the latest years and is expected to become of common implementation in the next future, at least for trucks.The platoon system is the result of a combination of multiple disciplines, from transportation, to automation, to electronics, to telecommunications. In this survey, we consider the platooning, and more specifically the platooning of trucks, from the point of view of wireless communications. Wireless communications are indeed a key element, since they allow the information to propagate within the convoy with an almost negligible delay and really making all vehicles acting as one. Scope of this paper is to present a comprehensive survey on connected vehicles for the platooning application, starting with an overview of the projects that are driving the development of this technology, followed by a brief overview of the current and upcoming vehicular networking architecture and standards, by a review of the main open issues related to wireless communications applied to platooning, and a discussion of security threats and privacy concerns. The survey will conclude with a discussion of the main areas that we consider still open and that can drive future research directions.(c) 2022 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)

A Framework for Quality of Service in Vehicle-to-Pedestrian Safety Communication

Vehicle-to-Everything (V2X) communication has emerged as an important mechanism to improve the safety and efficiency of road traffic. V2X communication encompasses Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I), and Vehicle-to-Pedestrian (V2P) communication. Among these types, the V2P communication efforts continue to be in the preliminary stage and lack a rounded approach towards the development of V2P systems. V2P involves communication between vehicles and a wide variety of Vulnerable Road Users (VRUs), such as pedestrians, bicyclists, mopeds, etc. The V2X systems were originally developed only for V2V and V2I when solely the vehicle characteristics were in focus. However, effective V2P system design needs to consider the characteristics of VRUs. The differing characteristics of VRUs have given rise to many questions while adapting to the V2V communication model for the V2P system. This dissertation addresses three aspects pertaining to the development of the V2P safety system. The first aspect involves a systematic design of a V2P system using a holistic approach. This dissertation proposes a V2P design framework based on various categories of inputs that are required for the design of an effective V2P system. This framework improves the understanding of the V2P system requirements and helps make the design process more systematic. The second aspect is the network performance of the V2X network in the presence of a large number of VRUs. This dissertation proposes MC-COCO4V2P, which is an energy-efficient pedestrian clustering mechanism for network congestion mitigation. MC-COCO4V2P improves network performance by reducing the pedestrian-generated safety messages. It also improves the battery life of the pedestrian devices in the process. The third aspect involves the reliability of communication between a pair of a vehicle and a pedestrian that are on the verge of collision. This dissertation classifies such crucial communication as the one requiring the highest priority even among the exchange of critical safety messages. It proposes a mechanism enabling the surrounding nodes to reduce the communication priority temporarily. This results in preferred medium access for the pair resulting in higher Quality-of-Service (QoS) for the crucial communication.Die Kommunikation zwischen Verkehrsteilnehmern (V2X) hat sich zu einem wichtigen Mechanismus zur Verbesserung der Sicherheit und Effizienz des Straßenverkehrs entwickelt. Obwohl die V2X-Kommunikation prinzipiell die Kommunikation zwischen Fahrzeugen (V2V), zwischen Fahrzeug und Infrastruktur (V2I) sowie zwischen Fahrzeug und Fußgänger (V2P) umfasst, sind Ansätze zur V2P-Kommunikation weiterhin in einem sehr frühen Stadium und lassen einen umfassenden Ansatz für die Entwicklung von V2P-Systemen vermissen. V2P umfasst im Detail die Kommunikation zwischen Fahrzeugen und einer Vielzahl von gefährdeten Verkehrsteilnehmern (VRUs), wie beispielsweise Fußgänger, Radfahrer oder Mopeds. V2X-Systeme wurden ursprünglich nur für V2V- und V2I-Kommunikation entwickelt, wobei ausschließlich die Fahrzeugeigenschaften im Fokus standen. Ein effektives V2P-Systemdesign muss jedoch auch die Eigenschaften von VRUs berücksichtigen, die bei der Berücksichtigung der V2P-Kommunikation in einem V2X-System viele Fragen aufwerfen. Diese Dissertation befasst sich mit drei Aspekten im Zusammenhang mit der Entwicklung eines V2P-Systems. Der erste Aspekt betrifft die systematische Konzeption eines V2P-Systems nach einem ganzheitlichen Ansatz. Diese Dissertation schlägt einen V2P-Entwurfsrahmen vor, der auf verschiedenen Eingangsgrößen basiert, die für die Entwicklung eines effektiven V2P-Systems erforderlich sind. Dieser Entwurfsrahmen verbessert das Verständnis der V2P-Systemanforderungen und trägt dazu bei, den Entwurfsprozess systematischer zu gestalten. Der zweite Aspekt betrifft die Leistung des V2X-Netzes, wenn eine große Anzahl von VRUs präsent ist. Diese Dissertation schlägt hierfür MC-COCO4V2P vor, einen energieeffizienten Clustering-Mechanismus für Fußgänger zur Eindämmung der Netzüberlastung. MC-COCO4V2P verbessert die Netzleistung, indem die Anzahl der von Fußgängern generierten Sicherheitsmeldungen reduziert wird. Damit wird zudem die Batterielebensdauer der von den Fußgängern genutzten Geräte verbessert. Der dritte Aspekt betrifft die Zuverlässigkeit der Kommunikation zwischen einem Fahrzeug und einem Fußgänger, die kurz vor einem Zusammenstoß stehen. Diese Dissertation stuft eine so wichtige Kommunikation als diejenige ein, die selbst beim Austausch anderer kritischer Sicherheitsnachrichten die höchste Priorität bekommt. Es wird ein Mechanismus vorgeschlagen, der es den umgebenden Verkehrsteilnehmern ermöglicht, ihre Kommunikationspriorität vorübergehend zu verringern. Dies führt zu einem bevorzugten Medienzugriff für die durch eine Kollision gefährdeten Verkehrsteilnehmer, was zu einer höheren Dienstgüte (QoS) für deren Kommunikation führt.Pedestrians and bicyclists, also known as Vulnerable Road Users (VRUs), are one of the weakest components of Intelligent Transportation Systems from a safety perspective. However, with the advent of new communication technologies, VRU protection may no longer be dependent solely on the vehicle’s safety systems. VRUs may share their location information with the surrounding vehicles to increase awareness of their presence. Such communication among vehicles and VRUs is referred to as Vehicle-to-Pedestrian (V2P) communication. Although the V2P system may be built upon the existing Vehicle-to-Vehicle communication system, it has its own set of challenges, such as different VRU mobility characteristics, energy-constrained devices, and VRU density. Therefore, there needs to be a V2P system model which is adapted to the VRU characteristics. This dissertation tackles this challenge by proposing a framework that enables scalability, reliability, and energy efficiency for VRU communication

An efficient cluster-based service model for vehicular ad-hoc networks on motorways

Vehicular Ad-Hoc Networks (VANET) can, but not limited to provide users with useful traffic and environmental information services to improve travelling efficiency and road safety. The communications systems used in VANET include vehicle-to-vehicle communications (V2V) and vehicle-to-infrastructure communications (V2I). The transmission delay and the energy consumption cost for maintaining good-quality communications vary depending on the transmission distance and transmission power, especially on motorways where vehicles are moving at higher speeds. In addition, in modern transportation systems, electric vehicles are becoming more and more popular, which require a more efficient battery management, this also call for an efficient way of vehicular transmission. In this project, a cluster-based two-way data service model to provide real-time data services for vehicles on motorways is designed. The design promotes efficient cooperation between V2V and V2I, or namely V2X, with the objective of improving both service and energy performance for vehicular networks with traffic in the same direction. Clustering is an effective way of applying V2X in VANET systems, where the cluster head will take the main responsibility of exchanging data with Road Side Units (RSU) and other cluster members. The model includes local service data collection, data aggregation, and service data downloading. We use SUMO and OMNET++ to simulate the traffic scenarios and the network communications. Two different models (V2X and V2I) are compared to evaluate the performance of the proposed model under different flow speeds. From the results, we conclude that the cluster-based service model outperforms the non-clustered model in terms of service successful ratio, network throughput and energy consumption