On the Energy Efficiency of LT Codes in Proactive Wireless Sensor Networks

This paper presents an in-depth analysis on the energy efficiency of Luby Transform (LT) codes with Frequency Shift Keying (FSK) modulation in a Wireless Sensor Network (WSN) over Rayleigh fading channels with pathloss. We describe a proactive system model according to a flexible duty-cycling mechanism utilized in practical sensor apparatus. The present analysis is based on realistic parameters including the effect of channel bandwidth used in the IEEE 802.15.4 standard, active mode duration and computation energy. A comprehensive analysis, supported by some simulation studies on the probability mass function of the LT code rate and coding gain, shows that among uncoded FSK and various classical channel coding schemes, the optimized LT coded FSK is the most energy-efficient scheme for distance d greater than the pre-determined threshold level d_T , where the optimization is performed over coding and modulation parameters. In addition, although the optimized uncoded FSK outperforms coded schemes for d < d_T , the energy gap between LT coded and uncoded FSK is negligible for d < d_T compared to the other coded schemes. These results come from the flexibility of the LT code to adjust its rate to suit instantaneous channel conditions, and suggest that LT codes are beneficial in practical low-power WSNs with dynamic position sensor nodes.Comment: accepted for publication in IEEE Transactions on Signal Processin

Cost-Effective and Energy-Efficient Techniques for Underwater Acoustic Communication Modems

Finally, the modem developed has been tested experimentally in laboratory (aquatic environment) showing that can communicates at different data rates (100..1200 bps) compared to state-of-the-art research modems. The software used include LabVIEW, MATLAB, Simulink, and Multisim (to test the electronic circuit built) has been employed.Underwater wireless sensor networks (UWSNs) are widely used in many applications related to ecosystem monitoring, and many more fields. Due to the absorption of electromagnetic waves in water and line-of-sight communication of optical waves, acoustic waves are the most suitable medium of communication in underwater environments. Underwater acoustic modem (UAM) is responsible for the transmission and reception of acoustic signals in an aquatic channel. Commercial modems may communicate at longer distances with reliability, but they are expensive and less power efficient. Research modems are designed by using a digital-signal-processor (DSP is expensive) and field-programmable-gate-array (FPGA is high power consuming device). In addition to, the use of a microcontroller is also a common practice (which is less expensive) but provides limited computational power. Hence, there is a need for a cost-effective and energy-efficient UAM to be used in budget limited applications. In this thesis different objectives are proposed. First, to identify the limitations of state-of-the-art commercial and research UAMs through a comprehensive survey. The second contribution has been the design of a low-cost acoustic modem for short-range underwater communications by using a single board computer (Raspberry-Pi), and a microcontroller (Atmega328P). The modulator, demodulator and amplifiers are designed with discrete components to reduce the overall cost. The third contribution is to design a web based underwater acoustic communication testbed along with a simulation platform (with underwater channel and sound propagation models), for testing modems. The fourth contribution is to integrate in a single module two important modules present in UAMs: the PSK modulator and the power amplifier

A Low-Power BFSK/OOK Transmitter for Wireless Sensors

In recent years, significant improvements in semiconductor technology have allowed consistent development of wireless chipsets in terms of functionality and form factor. This has opened up a broad range of applications for implantable wireless sensors and telemetry devices in multiple categories, such as military, industrial, and medical uses. The nature of these applications often requires the wireless sensors to be low-weight and energy-efficient to achieve long battery life. Among the various functions of these sensors, the communication block, used to transmit the gathered data, is typically the most power-hungry block. In typical wireless sensor networks, transmission range is below 10 meters and required radiated power is below 1 milliwatt. In such cases, power consumption of the frequency-synthesis circuits prior to the power amplifier of the transmitter becomes significant. Reducing this power consumption is currently the focus of various research endeavors. A popular method of achieving this goal is using a direct-modulation transmitter where the generated carrier is directly modulated with baseband data using simple modulation schemes. Among the different variations of direct-modulation transmitters, transmitters using unlocked digitally-controlled oscillators and transmitters with injection or resonator-locked oscillators are widely investigated because of their simple structure. These transmitters can achieve low-power and stable operation either with the help of recalibration or by sacrificing tuning capability. In contrast, phase-locked-loop-based (PLL) transmitters are less researched. The PLL uses a feedback loop to lock the carrier to a reference frequency with a programmable ratio and thus achieves good frequency stability and convenient tunability. This work focuses on PLL-based transmitters. The initial goal of this work is to reduce the power consumption of the oscillator and frequency divider, the two most power-consuming blocks in a PLL. Novel topologies for these two blocks are proposed which achieve ultra-low-power operation. Along with measured performance, mathematical analysis to derive rule-of-thumb design approaches are presented. Finally, the full transmitter is implemented using these blocks in a 130 nanometer CMOS process and is successfully tested for low-power operation

ULTRA LOW POWER FSK RECEIVER AND RF ENERGY HARVESTER

This thesis focuses on low power receiver design and energy harvesting techniques as methods for intelligently managing energy usage and energy sources. The goal is to build an inexhaustibly powered communication system that can be widely applied, such as through wireless sensor networks (WSNs). Low power circuit design and smart power management are techniques that are often used to extend the lifetime of such mobile devices. Both methods are utilized here to optimize power usage and sources. RF energy is a promising ambient energy source that is widely available in urban areas and which we investigate in detail. A harvester circuit is modeled and analyzed in detail at low power input. Based on the circuit analysis, a design procedure is given for a narrowband energy harvester. The antenna and harvester co-design methodology improves RF to DC energy conversion efficiency. The strategy of co-design of the antenna and the harvester creates opportunities to optimize the system power conversion efficiency. Previous surveys have found that ambient RF energy is spread broadly over the frequency domain; however, here it is demonstrated that it is theoretically impossible to harvest RF energy over a wide frequency band if the ambient RF energy source(s) are weak, owing to the voltage requirements. It is found that most of the ambient RF energy lies in a series of narrow bands. Two different versions of harvesters have been designed, fabricated, and tested. The simulated and measured results demonstrate a dual-band energy harvester that obtains over 9% efficiency for two different bands (900MHz and 1800MHz) at an input power as low as -19dBm. The DC output voltage of this harvester is over 1V, which can be used to recharge the battery to form an inexhaustibly powered communication system. A new phase locked loop based receiver architecture is developed to avoid the significant conversion losses associated with OOK architectures. This also helps to minimize power consumption. A new low power mixer circuit has also been designed, and a detailed analysis is provided. Based on the mixer, a low power phase locked loop (PLL) based receiver has been designed, fabricated and measured. A power management circuit and a low power transceiver system have also been co-designed to provide a system on chip solution. The low power voltage regulator is designed to handle a variety of battery voltage, environmental temperature, and load conditions. The whole system can work with a battery and an application specific integrated circuit (ASIC) as a sensor node of a WSN network

Efficient and Interference-Resilient Wireless Connectivity for IoT Applications

With the coming of age of the Internet of Things (IoT), demand on ultra-low power (ULP) and low-cost radios will continue to boost tremendously. The Bluetooth-Low-energy (BLE) standard provides a low power solution to connect IoT nodes with mobile devices, however, the power of maintaining a connection with a reasonable latency remains the limiting factor in defining the lifetime of event-driven BLE devices. BLE radio power consumption is in the milliwatt range and can be duty cycled for average powers around 30μW, but at the expense of long latency. Furthermore, wireless transceivers traditionally perform local oscillator (LO) calibration using an external crystal oscillator (XTAL) that adds significant size and cost to a system. Removing the XTAL enables a true single-chip radio, but an alternate means for calibrating the LO is required. Innovations in both the system architecture and circuits implementation are essential for the design of truly ubiquitous receivers for IoT applications. This research presents two porotypes as back-channel BLE receivers, which have lower power consumption while still being robust in the presents of interference and able to receive back-channel message from BLE compliant transmitters. In addition, the first crystal-less transmitter with symmetric over-the-air clock recovery compliant with the BLE standard using a GFSK-Modulated BLE Packet is presented.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/162942/1/abdulalg_1.pd

Designing Flexible, Energy Efficient and Secure Wireless Solutions for the Internet of Things

The Internet of Things (IoT) is an emerging concept where ubiquitous physical objects (things) consisting of sensor, transceiver, processing hardware and software are interconnected via the Internet. The information collected by individual IoT nodes is shared among other often heterogeneous devices and over the Internet. This dissertation presents flexible, energy efficient and secure wireless solutions in the IoT application domain. System design and architecture designs are discussed envisioning a near-future world where wireless communication among heterogeneous IoT devices are seamlessly enabled. Firstly, an energy-autonomous wireless communication system for ultra-small, ultra-low power IoT platforms is presented. To achieve orders of magnitude energy efficiency improvement, a comprehensive system-level framework that jointly optimizes various system parameters is developed. A new synchronization protocol and modulation schemes are specified for energy-scarce ultra-small IoT nodes. The dynamic link adaptation is proposed to guarantee the ultra-small node to always operate in the most energy efficiency mode, given an operating scenario. The outcome is a truly energy-optimized wireless communication system to enable various new applications such as implanted smart-dust devices. Secondly, a configurable Software Defined Radio (SDR) baseband processor is designed and shown to be an efficient platform on which to execute several IoT wireless standards. It is a custom SIMD execution model coupled with a scalar unit and several architectural optimizations: streaming registers, variable bitwidth, dedicated ALUs, and an optimized reduction network. Voltage scaling and clock gating are employed to further reduce the power, with a more than a 100% time margin reserved for reliable operation in the near-threshold region. Two upper bound systems are evaluated. A comprehensive power/area estimation indicates that the overhead of realizing SDR flexibility is insignificant. The benefit of baseband SDR is quantified and evaluated. To further augment the benefits of a flexible baseband solution and to address the security issue of IoT connectivity, a light-weight Galois Field (GF) processor is proposed. This processor enables both energy-efficient block coding and symmetric/asymmetric cryptography kernel processing for a wide range of GF sizes (2^m, m = 2, 3, ..., 233) and arbitrary irreducible polynomials. Program directed connections among primitive GF arithmetic units enable dynamically configured parallelism to efficiently perform either four-way SIMD GF operations, including multiplicative inverse, or a long bit-width GF product in a single cycle. This demonstrates the feasibility of a unified architecture to enable error correction coding flexibility and secure wireless communication in the low power IoT domain.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137164/1/yajchen_1.pd

Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation

Computational fluid dynamics (CFD) is a branch of fluid mechanics that use numerical analysis and data structures to analyze and solves problems that involve fluid flows. CFD have been applied to a wide range of research and engineering problems in many fields of study and industries, including engine and combustion analysis. The objective of this review paper is to analyze the behavior in the four-stroke Spark Ignition (SI) engine by using CFD simulation. To get the require result a few methods have been used to analyze the behavior in the engine such as using CAD geometric model where the solid works software have been prepared. Then, in the CAD geometric model also have ANSYS software to perform analysis in engine module. To predict the behavior of the engine during its working two type of analysis can be performed namely port flow simulation and combustion simulation. So, in first part of this report, the CFD analysis is carried out to analyze the performance parameter, including intake stroke, compression stroke, power stroke and exhaust stroke with hexane fuel combustion. For the results, some details of the engine model and some predicted results including temperature, flow time and pressure profiles. With the existence of CFD simulation it can help many fields of study and industries by predict and analyze the possibility that can be happened in the future. At the same time, serves as a quick and economical way of future engine designs and concepts