59 research outputs found

    Autonomous planning and control of soft untethered grippers in unstructured environments

    Get PDF
    The use of small, maneuverable, untethered and reconfigurable robots could provide numerous advantages in various micromanipulation tasks. Examples include microassembly, pick-and-place of fragile microobjects for lab-on-a-chip applications, assisted hatching for in-vitro fertilization and minimally invasive surgery. This study assesses the potential of soft untethered magnetic grippers as alternatives or complements to conventional tethered or rigid micromanipulators. We demonstrate closed-loop control of untethered grippers and automated pick-and-place of biological material on porcine tissue in an unstructured environment. We also demonstrate the ability of the soft grippers to recognize and sort non-biological micro-scale objects. The fully autonomous nature of the experiments is made possible by the integration of planning and decision-making algorithms, as well as by closed-loop temperature and electromagnetic motion control. The grippers are capable of completing pick-and-place tasks of biological material at an average velocity of 1.8±0.71 mm/s and a drop-off error of 0.62±0.22 mm. Color-sensitive sorting of three micro-scale objects is completed at a velocity of 1.21±0.68 mm/s and a drop-off error of 0.85±0.41 mm. Our findings suggest that improved autonomous un-tethered grippers could augment the capabilities of current soft-robotic instruments especially in advanced tasks involving manipulation

    マルチ スケール キノウ ヲ ユウスル コウソク ジドウ マイクロ マニピュレーション システム

    Full text link
    Ebubekir Avci, Chanh-Nghiem Nguyen, Kenichi Ohara, Yasushi Mae, Tatsuo Arai, Analysis and suppression of residual vibration in microhand for high-speed single-cell manipulation, International Journal of Mechatronics and Automation, 2013-Vol.3, No.2, pp.110-11

    Semi-autonomous scheme for pushing micro-objects

    Get PDF
    -In many microassembly applications, it is often desirable to position and orient polygonal micro-objects lying on a planar surface. Pushing micro-objects using point contact provides more flexibility and less complexity compared to pick and place operation. Due to the fact that in micro-world surface forces are much more dominant than inertial forces and these forces are distributed unevenly, pushing through the center of mass of the micro-object will not yield a pure translational motion. In order to translate a micro-object, the line of pushing should pass through the center of friction. In this paper, a semi-autonomous scheme based on hybrid vision/force feedback is proposed to push microobjects with human assistance using a custom built telemicromanipulation setup to achieve pure translational motion. The pushing operation is divided into two concurrent processes: In one process human operator who acts as an impedance controller alters the velocity of the pusher while in contact with the micro-object through scaled bilateral teleoperation with force feedback. In the other process, the desired line of pushing for the micro-object is determined continuously using visual feedback procedures so that it always passes through the varying center of friction. Experimental results are demonstrated to prove nanoNewton range force sensing, scaled bilateral teleoperation with force feedback and pushing microobjects

    Active Release of Microobjects Using a MEMS Microgripper to Overcome Adhesion Forces

    Full text link

    Target Point Manipulation Inside a Deformable Object

    Get PDF

    Microclamping principles from the perspective of micrometrology – A review

    Get PDF
    This paper gives an overview of the field of clamping and gripping principles from the viewpoint of sample fixturing for dimensional metrology for microobjects. The requirements for clamping microcomponents that allow dimensional measurements are therefore explained before principles and solutions of microclamps as found in literature are reviewed and evaluated on basis of these requirements. Results show that there is no single superior clamping principle or method of implementation but rather several effective solutions for specific applications. The core value of this paper is the link between requirements for sample fixturing in dimensional micrometrology and the many approaches already investigated in the field of microclamping. A radar chart and a decision tree summarize and visualize the major aspects of this review. Finally, directions of future key research areas are suggested

    Reaction Force/Torque Sensing in a Master-Slave Robot System without Mechanical Sensors

    Get PDF
    In human-robot cooperative control systems, force feedback is often necessary in order to achieve high precision and high stability. Usually, traditional robot assistant systems implement force feedback using force/torque sensors. However, it is difficult to directly mount a mechanical force sensor on some working terminals, such as in applications of minimally invasive robotic surgery, micromanipulation, or in working environments exposed to radiation or high temperature. We propose a novel force sensing mechanism for implementing force feedback in a master-slave robot system with no mechanical sensors. The system consists of two identical electro-motors with the master motor powering the slave motor to interact with the environment. A bimanual coordinated training platform using the new force sensing mechanism was developed and the system was verified in experiments. Results confirm that the proposed mechanism is capable of achieving bilateral force sensing and mirror-image movements of two terminals in two reverse control directions

    Microgripper design and evaluation for automated µ-wire assembly: a survey

    Get PDF
    Microgrippers are commonly used for micromanipulation of micro-objects from 1 to 100 µm and attain features of reliable accuracy, low cost, wide jaw aperture and variable applied force. This paper aim is to review the design of different microgrippers which can manipulate and assemble µ-wire to PCB connectors. A review was conducted on microgrippers’ technologies, comparing fundamental components of structure and actuators’ types, which determined the most suitable design for the required micromanipulation task. Various microgrippers’ design was explored to examine the suitability and the execution of requirements needed for successful micromanipulation

    Design and Implementation of Micro Mechatronic Systems- SMA Drive Polymer Microgripper

    Get PDF
    A micromechatronic gripper was designed, fabricated, and tested with the proposed control system. By following realization axioms, the microgripper system including a polyurethane (PU) gripper mechanism and shape memory alloy (SMA) actuator was designed and developed. The micromechatronic gripper system was realized with cross-sectional area of (π/4) × 5002 μm2 for clean room operation. A synergetic operation of SMA actuator for driving microgripper mechanism was investigated in visual-based control. By incorporating with inverse Preisach compensator, an explicit self-tuning controller through Ziegler-Nichols criterion was selected for controlling the self-biased SMA actuator. The application of the gripper system for gripping and transporting a glass particle of 30 μm was tested
    corecore