Analysis of synchronous localization systems for UAVs urban applications

[EN] Unmanned-Aerial-Vehicles (UAVs) represent an active research topic over multiple fields for performing inspection, delivery and surveillance applications among other operations. However, achieving the utmost efficiency requires drones to perform these tasks without the need of human intervention, which demands a robust and accurate localization system for achieving a safe and efficient autonomous navigation. Nevertheless, currently used satellite-based localization systems like GPS are insufficient for high-precision applications, especially in harsh scenarios like indoor and deep urban environments. In these contexts, Local Positioning Systems (LPS) have been widely proposed for satisfying the localization requirements of these vehicles. However, the performance of LPS is highly dependent on the actual localization architecture and the spatial disposition of the deployed sensor distribution. Therefore, before the deployment of an extensive localization network, an analysis regarding localization architecture and sensor distribution should be taken into consideration for the task at hand. Nonetheless, no actual study is proposed either for comparing localization architectures or for attaining a solution for the Node Location Problem (NLP), a problem of NP-Hard complexity. Therefore, in this paper, we propose a comparison among synchronous LPS for determining the most suited system for localizing UAVs over urban scenarios. We employ the Cràmer–Rao-Bound (CRB) for evaluating the performance of each localization system, based on the provided error characterization of each synchronous architecture. Furthermore, in order to attain the optimal sensor distribution for each architecture, a Black-Widow-Optimization (BWO) algorithm is devised for the NLP and the application at hand. The results obtained denote the effectiveness of the devised technique and recommend the implementation of Time Difference Of Arrival (TDOA) over Time of Arrival (TOA) systems, attaining up to 47% less localization uncertainty due to the unnecessary synchronization of the target clock with the architecture sensors in the TDOA architecture.S

TDOA based positioning in the presence of unknown clock skew

Cataloged from PDF version of article.This paper studies the positioning problem of a single target node based on time-difference-of-arrival (TDOA) measurements in the presence of clock imperfections. Employing an affine model for the behaviour of a local clock, it is observed that TDOA based approaches suffer from a parameter of the model, called the clock skew. Modeling the clock skew as a nuisance parameter, this paper investigates joint clock skew and position estimation. The maximum likelihood estimator (MLE) is derived for this problem, which is highly nonconvex and difficult to solve. To avoid the difficulty in solving the MLE, we employ suitable approximations and relaxations and propose two suboptimal estimators based on semidefinite programming and linear estimation. To further improve the estimation accuracy, we also propose a refining step. In addition, the Cramer-Rao ´ lower bound (CRLB) is derived for this problem as a benchmark. Simulation results show that the proposed suboptimal estimators can attain the CRLB for sufficiently high signal-to-noise ratios

A Hybrid Global Minimization Scheme for Accurate Source Localization in Sensor Networks

We consider the localization problem of multiple wideband sources in a multi-path environment by coherently taking into account the attenuation characteristics and the time delays in the reception of the signal. Our proposed method leaves the space for unavailability of an accurate signal attenuation model in the environment by considering the model as an unknown function with reasonable prior assumptions about its functional space. Such approach is capable of enhancing the localization performance compared to only utilizing the signal attenuation information or the time delays. In this paper, the localization problem is modeled as a cost function in terms of the source locations, attenuation model parameters and the multi-path parameters. To globally perform the minimization, we propose a hybrid algorithm combining the differential evolution algorithm with the Levenberg-Marquardt algorithm. Besides the proposed combination of optimization schemes, supporting the technical details such as closed forms of cost function sensitivity matrices are provided. Finally, the validity of the proposed method is examined in several localization scenarios, taking into account the noise in the environment, the multi-path phenomenon and considering the sensors not being synchronized

A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

Real-time sound source localisation for target tracking applications using an asynchronous microphone array

© 2015 IEEE. This paper presents a strategy for sound source localisation using an asynchronous microphone array. The proposed method is suitable for target tracking applications, in which the sound source with a known frequency is attached to the target. Conventional microphone array technologies require a multi-channel A/D converter for inter-microphone synchronization making the technology relatively expensive. In this work, the requirement of synchronization between channels is relaxed by adding an external reference audio signal. The only assumption is that the frequencies of the reference signal and the sound source attached to the target are fixed and known beforehand. By exploiting the information provided by the known reference signal, the Direction Of Arrival (DOA) of target sound source can be calculated in real-time. The key idea of the algorithm is to use the reference source to 'pseudo-align' the audio signals from different channels. Once the channels are 'pseudo-aligned', a dedicated DOA estimation method based on Time Difference Of Arrival (TDOA) can be employed to find the relative bearing information between the target sound source and microphone array. Due to the narrow band of frequency of target sound source, the proposed approach is proven to be robust to low signals-to-noise ratios. Comprehensive simulations and experimental results are presented to show the validity of the algorithm

TDOA Based Positioning in the Presence of Unknown Clock Skew

This paper studies the positioning problem of a single target node based on time-difference-of-arrival (TDOA) measurements in the presence of clock imperfections. Employing an affine model for the behaviour of a local clock, it is observed that TDOA based approaches suffer from a parameter of the model, called the clock skew. Modeling the clock skew as a nuisance parameter, this paper investigates joint clock skew and position estimation. The maximum likelihood estimator (MLE) is derived for this problem, which is highly nonconvex and difficult to solve. To avoid the difficulty in solving the MLE, we employ suitable approximations and relaxations and propose two suboptimal estimators based on semidefinite programming and linear estimation. To further improve the estimation accuracy, we also propose a refining step. In addition, the Cramér-Rao lower bound (CRLB) is derived for this problem as a benchmark. Simulation results show that the proposed suboptimal estimators can attain the CRLB for sufficiently high signal-to-noise ratios

Simultaneous asynchronous microphone array calibration and sound source localisation

© 2015 IEEE. In this paper, an approach for sound source localisation and calibration of an asynchronous microphone array is proposed to be solved simultaneously. A graph-based Simultaneous Localisation and Mapping (SLAM) method is used for this purpose. Traditional sound source localisation using a microphone array has two main requirements. Firstly, geometrical information of microphone array is needed. Secondly, a multichannel analog-to-digital converter is required to obtain synchronous readings of the audio signal. Recent works aim at releasing these two requirements by estimating the time offset between each pair of microphones. However, it was assumed that the clock timing in each microphone sound card is exactly the same, which requires the clocks in the sound cards to be identically manufactured. A methodology is hereby proposed to calibrate an asynchronous microphone array using a graph-based optimisation method borrowed from the SLAM literature, effectively estimating the array geometry, time offset and clock difference/drift rate of each microphone together with the sound source locations. Simulation and experimental results are presented, which prove the effectiveness of the proposed methodology in achieving accurate estimates of the microphone array characteristics needed to be used on realistic settings with asynchronous sound devices