Synthesis and Optimization of Reversible Circuits - A Survey

Reversible logic circuits have been historically motivated by theoretical research in low-power electronics as well as practical improvement of bit-manipulation transforms in cryptography and computer graphics. Recently, reversible circuits have attracted interest as components of quantum algorithms, as well as in photonic and nano-computing technologies where some switching devices offer no signal gain. Research in generating reversible logic distinguishes between circuit synthesis, post-synthesis optimization, and technology mapping. In this survey, we review algorithmic paradigms --- search-based, cycle-based, transformation-based, and BDD-based --- as well as specific algorithms for reversible synthesis, both exact and heuristic. We conclude the survey by outlining key open challenges in synthesis of reversible and quantum logic, as well as most common misconceptions.Comment: 34 pages, 15 figures, 2 table

RAKSHA:Reliable and Aggressive frameworK for System design using High-integrity Approaches

Advances in the fabrication technology have been a major driving force in the unprecedented increase in computing capabilities over the last several decades. Despite huge reductions in the switching energy of the transistors, two major issues have emerged with decreasing fabrication technology scales. They are: 1) increased impact of process, voltage, and temperature (PVT) variation on transistor performance, and 2) increased susceptibility of transistors to soft errors induced by high energy particles. In presence of PVT variation, as transistor sizes continue to decrease, the design margins used to guarantee correct operation in the presence of worst-case scenarios have been increasing. Systems run at a clock frequency, which is determined by accounting the worst-case timing paths, operating conditions, and process variations. Timing speculation based reliable and aggressive clocking advocates going beyond worst-case limits to achieve best performance while not avoiding, but detecting and correcting a modest number of timing errors. Such design methodology exploits the fact that timing critical paths are rarely exercised in a design, and typical execution happens much faster than the timing requirements dictated by worst-case scenarios. Better-than-worst-case design methodology is advocated by several recent research pursuits, which propose to exploit in-built fault tolerance mechanisms to enhance computer system performance. Recent works have also shown that the performance lose due to over provisioning base on worst-case design margins is upward of 20\% in terms operating frequency and upward of 50\% in terms of power efficiency. The threat of soft error induced system failure in computing systems has become more prominent as we adopt ultra-deep submicron process technologies. With respect to soft error susceptibility, decreasing transistor geometries lower the energy threshold needed by high-energy particles to induce errors. As this trend continues, the need for fault tolerance mechanisms to counteract this effect has moved from a nice to have, to be a requirement in current and future systems. In this dissertation, RAKSHA (meaning to protect and save in Sanskrit), we take a multidimensional look at the challenges of system design built with scaled-technologies using high integrity techniques. In RAKSHA, to mitigate soft errors, we propose lightweight high-integrity mechanisms as basic system building blocks which allow system to offer performance levels comparable to a non-fault tolerant system. In addition, we also propose to effectively exploit and use the availability of fault tolerant mechanisms to allow and tolerate data-dependent failures, thus setting systems to operate at typical case circuit delays and enhance system performance. We also propose the use of novel high-integrity cells for increasing system energy efficiency and also potentially increasing system security by combating power-analysis-based side channel attacks. Such an approach allows balancing of performance, power, and security with no further overhead over the resources needed to incorporate fault tolerance. Using our framework, instead of designing circuits to meet worst-case requirements, circuits can be designed to meet typical-case requirements. In RAKSHA, we propose two efficient soft error mitigation schemes, namely Soft Error Mitigation (SEM) and Soft and Timing Error Mitigation (STEM), using the approach of multiple clocking of data for protecting combinational logic blocks from soft errors. Our first technique, SEM, based on distributed and temporal voting of three registers, unloads the soft error detection overhead from the critical path of the systems. SEM is also capable of ignoring false errors and recovers from soft errors using in-situ fast recovery avoiding recomputation. Our second technique, STEM, while tolerating soft errors, adds timing error detection capability to guarantee reliable execution in aggressively clocked designs that enhance system performance by operating beyond worst-case clock frequency. We also present a specialized low overhead clock phase management scheme that ably supports our proposed techniques. Timing annotated gate level simulations, using 45nm libraries, of a pipelined adder-multiplier and DLX processor show that both our techniques achieve near 100% fault coverage. For DLX processor, even under severe fault injection campaigns, SEM achieves an average performance improvement of 26.58% over a conventional triple modular redundancy voter based soft error mitigation scheme, while STEM outperforms SEM by 27.42%. We refer to systems built with SEM and STEM cells as reliable and aggressive systems. Energy consumption minimization in computing systems has attracted a great deal of attention and has also become critical due to battery life considerations and environmental concerns. To address this problem, many task scheduling algorithms are developed using dynamic voltage and frequency scaling (DVFS). Majority of these algorithms involve two passes: schedule generation and slack reclamation. Using this approach, linear combination of frequencies has been proposed to achieve near optimal energy for systems operating with discrete and traditional voltage frequency pairs. In RAKSHA, we propose a new slack reclamation algorithm, aggressive dynamic and voltage scaling (ADVFS), using reliable and aggressive systems. ADVFS exploits the enhanced voltage frequency spectrum offered by reliable and aggressive designs for improving energy efficiency. Formal proofs are provided to show that optimal energy for reliable and aggressive designs is either achieved by using single frequency or by linear combination of frequencies. ADVFS has been evaluated using random task graphs and our results show 18% reduction in energy when compared with continuous DVFS and over more than 33% when compared with scheme using linear combination of traditional voltage frequency pairs. Recent events have indicated that attackers are banking on side-channel attacks, such as differential power analysis (DPA) and correlation power analysis (CPA), to exploit information leaks from physical devices. Random dynamic voltage frequency scaling (RDVFS) has been proposed to prevent such attacks and has very little area, power, and performance overheads. But due to the one-to-one mapping present between voltage and frequency of DVFS voltage-frequency pairs, RDVFS cannot prevent power attacks. In RAKSHA, we propose a novel countermeasure that uses reliable and aggressive designs to break this one-to-one mapping. Our experiments show that our technique significantly reduces the correlation for the actual key and also reduces the risk of power attacks by increasing the probability for incorrect keys to exhibit maximum correlation. Moreover, our scheme also enables systems to operate beyond the worst-case estimates to offer improved power and performance benefits. For the experiments conducted on AES S-box implemented using 45nm CMOS technology, our approach has increased performance by 22% over the worst-case estimates. Also, it has decreased the correlation for the correct key by an order and has increased the probability by almost 3.5X times for wrong keys when compared with the original key to exhibit maximum correlation. Overall, RAKSHA offers a new way to balance the intricate interplay between various design constraints for the systems designed using small scaled-technologies

Techniques for the realization of ultra- reliable spaceborne computer Final report

Bibliography and new techniques for use of error correction and redundancy to improve reliability of spaceborne computer

Fault testing quantum switching circuits

Test pattern generation is an electronic design automation tool that attempts to find an input (or test) sequence that, when applied to a digital circuit, enables one to distinguish between the correct circuit behavior and the faulty behavior caused by particular faults. The effectiveness of this classical method is measured by the fault coverage achieved for the fault model and the number of generated vectors, which should be directly proportional to test application time. This work address the quantum process validation problem by considering the quantum mechanical adaptation of test pattern generation methods used to test classical circuits. We found that quantum mechanics allows one to execute multiple test vectors concurrently, making each gate realized in the process act on a complete set of characteristic states in space/time complexity that breaks classical testability lower bounds.Comment: (almost) Forgotten rewrite from 200

The Logic of Random Pulses: Stochastic Computing.

Recent developments in the field of electronics have produced nano-scale devices whose operation can only be described in probabilistic terms. In contrast with the conventional deterministic computing that has dominated the digital world for decades, we investigate a fundamentally different technique that is probabilistic by nature, namely, stochastic computing (SC). In SC, numbers are represented by bit-streams of 0's and 1's, in which the probability of seeing a 1 denotes the value of the number. The main benefit of SC is that complicated arithmetic computation can be performed by simple logic circuits. For example, a single (logic) AND gate performs multiplication. The dissertation begins with a comprehensive survey of SC and its applications. We highlight its main challenges, which include long computation time and low accuracy, as well as the lack of general design methods. We then address some of the more important challenges. We introduce a new SC design method, called STRAUSS, that generates efficient SC circuits for arbitrary target functions. We then address the problems arising from correlation among stochastic numbers (SNs). In particular, we show that, contrary to general belief, correlation can sometimes serve as a resource in SC design. We also show that unlike conventional circuits, SC circuits can tolerate high error rates and are hence useful in some new applications that involve nondeterministic behavior in the underlying circuitry. Finally, we show how SC's properties can be exploited in the design of an efficient vision chip that is suitable for retinal implants. In particular, we show that SC circuits can directly operate on signals with neural encoding, which eliminates the need for data conversion.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113561/1/alaghi_1.pd

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Study of the effects of SEU-induced faults on a pipeline protected microprocessor

This paper presents a detailed analysis of the behavior of a novel fault-tolerant 32-bit embedded CPU as compared to a default (non-fault-tolerant) implementation of the same processor during a fault injection campaign of single and double faults. The fault-tolerant processor tested is characterized by per-cycle voting of microarchitectural and the flop-based architectural states, redundancy at the pipeline level, and a distributed voting scheme. Its fault-tolerant behavior is characterized for three different workloads from the automotive application domain. The study proposes statistical methods for both the single and dual fault injection campaigns and demonstrates the fault-tolerant capability of both processors in terms of fault latencies, the probability of fault manifestation, and the behavior of latent faults

Real-time support for high performance aircraft operation

The feasibility of real-time processing schemes using artificial neural networks (ANNs) is investigated. A rationale for digital neural nets is presented and a general processor architecture for control applications is illustrated. Research results on ANN structures for real-time applications are given. Research results on ANN algorithms for real-time control are also shown