Low Voltage Electrohydraulic Actuators for Untethered Robotics

Rigid robots can be precise in repetitive tasks but struggle in unstructured environments. Nature's versatility in such environments inspires researchers to develop biomimetic robots that incorporate compliant and contracting artificial muscles. Among the recently proposed artificial muscle technologies, electrohydraulic actuators are promising since they offer comparable performance to mammalian muscles in terms of speed and power density. However, they require high driving voltages and have safety concerns due to exposed electrodes. These high voltages lead to either bulky or inefficient driving electronics that make untethered, high-degree-of-freedom bio-inspired robots difficult to realize. Here, we present low voltage electrohydraulic actuators (LEAs) that match mammalian skeletal muscles in average power density (50.5 W/kg) and peak strain rate (971 percent/s) at a driving voltage of just 1100 V. This driving voltage is approx. 5 - 7 times lower compared to other electrohydraulic actuators using paraelectric dielectrics. Furthermore, LEAs are safe to touch, waterproof, and self-clearing, which makes them easy to implement in wearables and robotics. We characterize, model, and physically validate key performance metrics of the actuator and compare its performance to state-of-the-art electrohydraulic designs. Finally, we demonstrate the utility of our actuators on two muscle-based electrohydraulic robots: an untethered soft robotic swimmer and a robotic gripper. We foresee that LEAs can become a key building block for future highly-biomimetic untethered robots and wearables with many independent artificial muscles such as biomimetic hands, faces, or exoskeletons.Comment: Stephan-Daniel Gravert and Elia Varini contributed equally to this wor

Origami-inspired soft twisting actuator

Soft actuators have shown great advantages in compliance and morphology matched for manipulation of delicate objects and inspection in a confined space. There is an unmet need for a soft actuator that can provide torsional motion to e.g. enlarge working space and increase degrees of freedom. Towards this goal, we present origami-inspired soft pneumatic actuators (OSPAs) made from silicone. The prototype can output a rotation of more than one revolution (up to 435{\deg}), more significant than its counterparts. Its rotation ratio (=rotation angle/ aspect ratio) is more than 136{\deg}, about twice the largest one in other literature. We describe the design and fabrication method, build the analytical model and simulation model, and analyze and optimize the parameters. Finally, we demonstrate the potentially extensive utility of the OSPAs through their integration into a gripper capable of simultaneously grasping and lifting fragile or flat objects, a versatile robot arm capable of picking and placing items at the right angle with the twisting actuators, and a soft snake robot capable of changing attitude and directions by torsion of the twisting actuators.Comment: 9 figures. Soft Robotics (2022

Focus+Context via Snaking Paths

Focus+context visualizations reveal specific structures in high detail while effectively depicting its surroundings, often relying on transitions between the two areas to provide context. We present an approach to generate focus+context visualizations depicting cylindrical structures along snaking paths that enables the structures themselves to become the transitions and focal areas, simultaneously. A method to automatically create a snaking path through space by applying a path finding algorithm is presented. A 3D curve is created based on the 2D snaking path. We describe a process to deform cylindrical structures in segmented volumetric models to match the curve and provide preliminary geometric models as templates for artists to build upon. Structures are discovered using our constrained volumetric sculpting method that enables removal of occluding material while leaving them intact. We find the resulting visualizations effectively mimic a set of motivating illustrations and discuss some limitations of the automatic approach

Design and Fabrication of Soft 3D Printed Actuators: Expanding Soft Robotics Applications

Soft pneumatic actuators are ideal for soft robotic applications due to their innate compliance and high power-weight ratios. Presently, the majority of soft pneumatic actuators are used to create bending motions, with very few able to produce significant linear movements. Fewer can actively produce strains in multiple directions. The further development of these actuators is limited by their fabrication methods, specifically the lack of suitable stretchable materials for 3D printing. In this thesis, a new highly elastic resin for digital light projection 3D printers, designated ElastAMBER, is developed and evaluated, which shows improvements over previously synthesised elastic resins. It is prepared from a di-functional polyether urethane acrylate oligomer and a blend of two different diluent monomers. ElastAMBER exhibits a viscosity of 1000 mPa.s at 40 °C, allowing easy printing at near room temperatures. The 3D-printed components present an elastomeric behaviour with a maximum extension ratio of 4.02 ± 0.06, an ultimate tensile strength of (1.23 ± 0.09) MPa, low hysteresis, and negligible viscoelastic relaxation

Optimisation of surface coverage paths used by a non-contact robot painting system

This thesis proposes an efficient path planning technique for a non-contact optical “painting” system that produces surface images by moving a robot mounted laser across objects covered in photographic emulsion. In comparison to traditional 3D planning approaches (e.g. laminar slicing) the proposed algorithm dramatically reduces the overall path length by optimizing (i.e. minimizing) the amounts of movement between robot configurations required to position and orientate the laser. To do this the pixels of the image (i.e. points on the surface of the object) are sequenced using configuration space rather than Cartesian space. This technique extracts data from a CAD model and then calculates the configuration that the five degrees of freedom system needs to assume to expose individual pixels on the surface. The system then uses a closest point analysis on all the major joints to sequence the points and create an efficient path plan for the component. The implementation and testing of the algorithm demonstrates that sequencing points using a configuration based method tends to produce significantly shorter paths than other approaches to the sequencing problem. The path planner was tested with components ranging from simple to complex and the paths generated demonstrated both the versatility and feasibility of the approach

Design and Optimization of a Robot for Abrasive Waterjet Polishing of Hydraulic Turbine Blades

RÉSUMÉ Dans l’industrie de fabrication de turbine hydraulique, toutes les surfaces de turbines qui sont en contact avec de l’eau devraient être polies afin d’obtenir la qualité et l’efficacité maximales. Pour cela, il est nécessaire d’utiliser une méthode de polissage qui peut avoir accès à toutes les surfaces des turbines incluant leurs bords, leurs zones restreintes et leurs courbures serrées. En raison des propriétés particulières qu’offre la technique de polissage par jet d’eau abrasif, celle-ci peut être utilisée pour accomplir cette tâche. Par conséquent, dans cette recherche, les propriétés de cette méthode non-conventionnelle sont examinées dans un premier temps et les principaux paramètres affectant ses performances sont alors déterminés. Ensuite, les conditions nécessaires de manipulations de la buse de pulvérisation vis-à-vis des surfaces courbes sont étudiées et les propriétés d’un bras robotisé pour manipuler celle-ci sont obtenues afin de réaliser cette tâche d’une manière appropriée. Par après, plusieurs mécanismes robotiques tels que des mécanismes sériels, parallèles à membrures, parallèles à câbles, et des robots hybrides sont considérés et leurs capacités à être utilisé dans ce processus sont analysées. Il est alors démontré qu’une l’architecture hybride est le meilleur candidat à retenir pour le design d’un robot de polissage par jet d’eau abrasif. Ensuite, l’architecture conceptuelle d’un robot hybride à 5 DDL est proposée. La structure du robot est constituée d’un mécanisme parallèle à câbles à 3 DDL et d’un poignet sériel à 2 DDL. Afin d’améliorer les propriétés cinématiques du mécanisme à câbles tout en minimisant le nombre d’actionneurs nécessaires, il est proposé d’utiliser des différentiels pour guider ce robot manipulateur. Aussi, la rigidité et la compacité du mécanisme sont améliorées en utilisant une liaison prismatique. Par la suite, les systèmes à câbles différentiels sont examinés et les différences entre leurs propriétés cinématiques et celles de systèmes actionnés indépendamment pour chaque câble sont décrites. Il est démontré que la force résultante de tous les câbles d’un différentiel à câbles doit être prise en compte dans son analyse cinématique. En effet, dans un système différentiel planaire, la direction de la force résultante n’est pas fixée vers un point particulier. Mais plutôt, elle se déplace dans le plan de ce système différentiel. Cette propriété peut être bénéfique pour les propriétés cinématiques des robots à câbles. En comparant deux types d’espace de travail de plusieurs robots planaires actionnés par des mécanismes différentiels par rapport à leurs équivalents pleinement actionnés, il est alors montré qu’en utilisant ces mécanismes, les espaces de travail des robots planaires à câbles peuvent être améliorés. Cependant, cette même propriété qui augmente la plage de variation de la direction de la force résultante dans un câble différentiel, diminue aussi son amplitude. Ainsi, le design optimal d’un différentiel à câble résulte d’un compromis entre ces deux propriétés.----------ABSTRACT In hydraulic turbine manufacturing, all surfaces of the turbines which are in contact with the water flow should be polished to obtain the desired quality and maximal efficiency. For this, it is needed to use an effective polishing method which can have access to all surfaces of the turbines including edges, narrow areas and tight bends. Because of the particular properties of the abrasive waterjet polishing technique, it can be used to accomplish this task. Therefore, in this research, the properties of this non-conventional method are first investigated and the main parameters affecting its performance are then determined. Next, the manipulation requirements of the jet nozzle over free-form surfaces are studied and the properties of a robotic arm to appropriately perform this task are obtained. Afterwards, several robotic mechanisms, e.g., serial, linkage-driven parallel, cabledriven parallel, and hybrid robots are considered and their abilities to be used in this process are investigated. It is then shown that a hybrid architecture is the best candidate for the design of an abrasive waterjet polishing robot. Next, the conceptual design of a 5-DOF hybrid robot is proposed. The structure of this robot is made of a 3-DOF cable-driven parallel mechanism and a 2-DOF serial wrist. To improve the kinematic properties of the cable-driven mechanism while the number of required actuators is kept at a minimum, it is proposed to use cable differentials to drive this manipulator. Also, the rigidity and compactness of the mechanism is improved through the use of a prismatic joint in its structure. Afterwards, differentially driven cable systems are investigated and the differences between their kinematic properties and these of independently actuated cables are described. It is shown that the resultant force of all cables of a cable differential should be taken into account in its kinematic analysis. Indeed, in a planar differential, the direction of the resultant force is not fixed toward a particular point. Instead, it moves within the plane of that differential. This property can be beneficial in the kinematic properties of differentially driven cable robots. By comparing two types of workspaces of several planar robots actuated by differentials with their fully actuated counterparts, it is then shown that using these mechanisms, these workspaces of planar cable robots can be improved. However, the same property that increases the range of variation of the resultant force direction in a cable differential, decreases its magnitude. Thus, the optimal design of a cable differential is a trade-off between these two properties. Next, a synthesis method is presented to find all possible arrangements of the cable differentials to generalize the idea of using such mechanisms in the design of planar cable robots. Additionally, the application of differentials in spatial robots is also investigated and it is shown that they have properties similar to the planar types

Advanced Radio Frequency Identification Design and Applications

Radio Frequency Identification (RFID) is a modern wireless data transmission and reception technique for applications including automatic identification, asset tracking and security surveillance. This book focuses on the advances in RFID tag antenna and ASIC design, novel chipless RFID tag design, security protocol enhancements along with some novel applications of RFID