230 research outputs found
Recommended from our members
A Passive UHF RFID System over Ethernet Cable for Long Range Detection
This paper proposes a new form of passive UHF RFID system which has high tag detection accuracy but lower costs than existing systems for wide-range RFID scenarios requiring greater flexibility. This new system concept consists of a central baseband controller and a remote antenna subsystem, connected using a twisted-pair cable. Baseband signals are transmitted over the twisted-pair cable during the inventory session, and the transmitted radio frequency (RF) signals are up and down converted in the antenna subsystem. ā 88 dBm reader sensitivity is achieved with an active leakage cancellation block, showing little degradation in tag detection performance over a 300m of Cat5e cable between the controller and the antenna. An average leakage suppression of 36.9 dB can be achieved with a fixed transmission power of 26.5 dBm. Compared with conventional RFID systems using coaxial cables between the reader and antenna, the presented system is superior in terms of link distance, link cost, and installation flexibility
Recommended from our members
A Novel Long-Range Passive UHF RFID System over Twisted-pair Cable
Radio Frequency Identification (RFID) is one of the most representative, rapidly growing, and highly extendable technologies, which uses electromagnetic waves in accordance with specific communications standards and regulations to identify, track, or even localise desired objects. However, due to its high cost, limited read range, and uncertain reliability, its adoption still lags, especially in large-scale organisations. Even though an RFID distributed antenna system (DAS) can greatly improve the detection range and read rate of a single reader when system uses different combinations of antenna states with frequency and phase hopping, the lossy and heavy coaxial cables between reader and antennas still limits the system coverage and design flexibility for wide-area passive UHF RFID applications.
In order to develop a cost-efficient and flexibly-installed passive RFID DAS, a novel large-range passive UHF RFID system over twisted-pair cable is proposed in this dissertation. This new system consists of one baseband central controller and one antenna subsystem, connected by a commonly used twisted-pair cable. It is shown that transmitting/receiving low frequency baseband signals over a twisted-pair cable can significantly reduce cable attenuation and extend the communication distance. A simulation is conducted to demonstrate that frequency and phase hopping can also be remotely controlled to fit this system structure by slightly varying the frequency or phase of the input reference signal of the frequency synthesis system. The features of twisted-pair cable in terms of its low cost, light weight, and bend radius greatly improve the design and installation flexibility of an RFID system.
The implemented system is designed based on the ISO 18000-6C and EPC Class 1 Generation 2 standards, and can operate according to FCC (902-928 MHz) and ETSI (865-868MHz) regulations. The results of the measurement show the reader can achieve a sensitivity of - 94.5 dBm over 30 m Cat5e cable, and its sensitivity can still remain at around -94.2 dBm over 150 m Cat5e cable. The experimental results of tag detection show that the passive tags can be successfully detected over a 6 m wireless range following a 300 m of twisted-pair cable between the central controller and antenna. This detection range cannot be achieved by existing commercial RFID systems.
Since the transmission and reception in a RFID system are simultaneous, finite isolation of the circulator/directional coupler and environmentally dependent reflection ratio of the antenna lead to serious leakage problems. Leakage can directly cause sensitivity degradation due to saturation of the RF components. A fast leakage suppression block is developed in efforts to solve this problem. Measurements show that this new canceller can deliver an average suppression of 36.9 dB, and this excellent performance remains when the system uses frequency hopping. With help of an improved scanning algorithm, this canceller can find its optimal status within 38 ms, and this settling time is short enough for most commercial RFID readers. By reducing the number of voltage samples taken, the convergence time can be further improved.
To fully investigate this new passive UHF RFID system value, a comparison study between the new system and a commercial system is conducted. This new automatic passive UHF RFID system is confirmed to deliver high performance long-range passive tag detection. Particular advantages are shown in the fast tag read rate and capability of uplink SNR improvement. This novel system is also superior to conventional RFID systems in terms of link distance, link cost, and installation flexibility
Signal Detection in Ambient Backscatter Systems: Fundamentals, Methods, and Trends
Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to
connect vast numbers of devices to gather and distribute vital information.
Despite individual devices having low energy consumption, the cumulative demand
results in significant energy usage. Consequently, the concept of
ultra-low-power tags gains appeal. Such tags communicate by reflecting rather
than generating the radio frequency (RF) signals by themselves. Thus, these
backscatter tags can be low-cost and battery-free. The RF signals can be
ambient sources such as wireless-fidelity (Wi-Fi), cellular, or television (TV)
signals, or the system can generate them externally. Backscatter channel
characteristics are different from conventional point-to-point or cooperative
relay channels. These systems are also affected by a strong interference link
between the RF source and the tag besides the direct and backscattering links,
making signal detection challenging. This paper provides an overview of the
fundamentals, challenges, and ongoing research in signal detection for AmBC
networks. It delves into various detection methods, discussing their advantages
and drawbacks. The paper's emphasis on signal detection sets it apart and
positions it as a valuable resource for IoT and wireless communication
professionals and researchers.Comment: Accepted for publication in the IEEE Acces
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modiļ¬ed our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the ļ¬eld of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks
Recommended from our members
DISTRIBUTED PHASED ARRAY ANTENNAS IN WIDE AREA RFID
Ultra High Frequency (UHF) Radio Frequency Identification (RFID) has gained importance over the past two decades in many applications such as stock management, asset
tracking and access control. For wide area applications, Distributed Antenna Systems
(DAS) have been used to obtain good coverage with few antennas by making use of
multiple spatially distributed antennas and phase dithering. This implements a far-field
beamforming that maximises the instantaneous power at a tag. Separately, phased array
antennas have also been used to increase the read range by increasing the effective field
of view of an antenna and overcoming multipath fading through beam steering. This
dissertation explores a combination of both approaches to improve RFID read ranges in
wide interrogation zones.
Distributed antenna arrays are explored in the context of delivering high tag detection
probabilities in a multi-cell RFID system, while maximising inter-antenna separations.
A Distributed Antenna Array System (DAAS) is designed and shown to be capable of
providing comparable performance to a fixed DAS system with fewer antennas. The properties of the system are further studied and its upper performance limit is explored by
modelling a hypothetical perfectly steerable antenna array. The concept of using perfectly
steerable arrays is further explored to propose a cell-less RFID system, in which cell allocation in wide area RFID is replaced with a tag location-based interrogation requiring the
global reader antenna population to be used for interrogation of all tags, leading to significant potential increases in inter-antenna separation, and consequently good coverage
with fewer antennas. It is also argued that this system leads to the avoidance of complex
reader anti-collision policies, since only a single central reader is now required. Finally,
the design of a wide-scan-angle antenna array is presented as a compromise solution for
perfectly steerable antennas, whist still keeping the desired property of being flat panel.
A 3D RFID multi-antenna model is presented and used for simulating and analysing the
various described systems and for system planning
Internet of Things and Sensors Networks in 5G Wireless Communications
This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors
Internet of Things and Sensors Networks in 5G Wireless Communications
The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic
2020 NASA Technology Taxonomy
This document is an update (new photos used) of the PDF version of the 2020 NASA Technology Taxonomy that will be available to download on the OCT Public Website. The updated 2020 NASA Technology Taxonomy, or "technology dictionary", uses a technology discipline based approach that realigns like-technologies independent of their application within the NASA mission portfolio. This tool is meant to serve as a common technology discipline-based communication tool across the agency and with its partners in other government agencies, academia, industry, and across the world
- ā¦