Experimental Validation of a Faithful Binary Circuit Model

International audienceFast digital timing simulations based on continuous-time, digital-value circuit models are an attractive and heavily used alternative to analog simulations. Models based on analytic delay formulas are particularly interesting here, as they also facilitate formal verification and delay bound synthesis of complex circuits. Recently, Függer et al. (arXiv:1406.2544 [cs.OH]) proposed a circuit model based on so-called involution channels. It is the first binary circuit model that realistically captures solvability of short-pulse filtration, a non-trivial glitch propagation problem related to building one-shot inertial delays. In this work, we address the question of whether involu-tion channels also accurately model the delay of real circuits. Using both Spice simulations and physical measurements, we confirm that modeling an inverter chain by involution channels accurately describes reality. We also demonstrate that transitions in vanishing pulse trains are accurately predicted by the involution model. For our Spice simulations, we used both UMC-90 and UMC-65 technology, with varying supply voltages from nominal down to near sub-threshold range. The measurements were performed on a special-purpose UMC-90 ASIC that combines an inverter chain with low-intrusive high-speed on-chip analog amplifiers

Power reduction techniques for memory elements

High performance and computational capability in the current generation processors are made possible by small feature sizes and high device density. To maintain the current drive strength and control the dynamic power in these processors, simultaneous scaling down of supply and threshold voltages is performed. High device density and low threshold voltages result in an increase in the leakage current dissipation. Large on chip caches are integrated onto the current generation processors which are becoming a major contributor to total leakage power. In this work, a novel methodology is proposed to minimize the leakage power and dynamic power. The proposed static power reduction technique, GALEOR (GAted LEakage transistOR), introduces stacks by placing high threshold voltage transistors and consists of inherent control logic. The proposed dynamic power reduction technique, adaptive phase tag cache, achieves power savings through varying tag size for a design window. Testing and verification of the proposed techniques is performed on a two level cache system. Power delay squared product is used as a metric to measure the effectiveness of the proposed techniques. The GALEOR technique achieves 30% reduction when implemented on CMOS benchmark circuits and an overall leakage savings of 9% when implemented on the two level cache systems. The proposed dynamic power reduction technique achieves 10% savings when implemented on individual modules of the two level cache and an overall savings of 3% when implemented on the entire two level cache system

Power Modeling of Cmos Digital Circuits with a Piecewise Linear Model

This paper presents the average power modeling of CMOS digital circuits with a piecewise linear (PWL) model. The innovation of the piecewise linear model in the average power evaluation against previous power models is to include, for the first time, the effects of the first-order channel capacitive currents into a power calculation. Also, the model in the evaluation of the average power supply current predicts the currents contributed to the short-circuit power, dynamic power, and switching power of parasitic capacitances. A first-order channel storage charge model is derived to compute the power consumption caused by the nonlinear parasitic capacitances in a transistor channel. The PWL modeling of average power was validated by comparing SPICE average power simulation from the power supply current. The proposed model was validated with a submicron CMOS 0.5 um process and a deep submicron 0.18 um process to test its portability as a technology-independent model.School of Electrical & Computer Engineerin

NONLINEAR OPERATORS FOR IMAGE PROCESSING: DESIGN, IMPLEMENTATION AND MODELING TECHNIQUES FOR POWER ESTIMATION

1998/1999Negli ultimi anni passati le applicazioni multimediali hanno visto uno sviluppo notevole, trovando applicazione in un gran numero di campi. Applicazioni come video conferenze, diagnostica medica, telefonia mobile e applicazioni militari necessitano il trattamento di una gran mole di dati ad alta velocità. Pertanto, l'elaborazione di immagini e di dati vocali è molto importante ed è stata oggetto di numerosi sforzi, nel tentativo di trovare algoritmi sempre più veloci ed efficaci. Tra gli algoritmi proposti, noi crediamo che gli operatori razionali svolgano un ruolo molto importante, grazie alla loro versatilità ed efficacia nell'elaborazione di dati. Negli ultimi anni sono stati proposti diversi algoritmi, dimostrando che questi operatori possono essere molto vantaggiosi in diverse applicazioni, producendo buoni risultati. Lo scopo di questo lavoro è di realizzare alcuni di questi algoritmi e, quindi, dimostrare che i filtri razionali, in particolare, possono essere realizzati senza ricorrere a sistemi di grandi dimensioni e possono raggiungere frequenze operative molto alte. Una volta che il blocco fondamentale di un sistema basato su operatori razionali sia stato realizzato, esso pu6 essere riusato con successo in molte altre applicazioni. Dal punto di vista del progettista, è importante avere uno schema generale di studio, che lo renda capace di studiare le varie configurazioni del sistema da realizzare e di analizzare i compromessi tra le variabili di progetto. In particolare, per soddisfare l'esigenza di metodi versatili per la stima della potenza, abbiamo sviluppato una tecnica di macro modellizazione che permette al progettista di stimare velocemente ed accuratamente la potenza dissipata da un circuito. La tesi è organizzata come segue: Nel Capitolo 1 alcuni sono presentati alcuni algoritmi studiati per la realizzazione. Ne viene data solo una veloce descrizione, lasciando comunque al lettore interessato dei riferimenti bibliografici. Nel Capitolo 2 vengono discusse le architetture fondamentali usate per la realizzazione. Principalmente sono state usate architetture a pipeline, ma viene data anche una descrizione degli approcci oggigiorno disponibili per l'ottimizzazione delle temporizzazioni. Nel Capitolo 3 sono presentate le realizzazioni di due sistemi studiati per questa tesi. Gli approcci seguiti si basano su ASIC e FPGA. Richiedono tecniche e soluzioni diverse per il progetto del sistema, per cui é interessante vedere cosa pu6 essere fatto nei due casi. Infine, nel Capitolo 4, descriviamo la nostra tecnica di macro modellizazione per la stima di potenza, dando una breve visione delle tecniche finora proposte e facendo vedere quali sono i vantaggi che il nostro metodo comporta per il progetto.In the past few years, multimedia application have been growing very fast, being applied to a large variety of fields. Applications like video conference, medical diagnostic, mobile phones, military applications require to handle large amount of data at high rate. Images as well as voice data processing are therefore very important and they have been subjected to a lot of efforts in order to find always faster and effective algorithms. Among image processing algorithms, we believe that rational operators assume an important role, due to their versatility and effectiveness in data processing. In the last years, several algorithms have been proposed, demonstrating that these operators can be very suitable in different applications with very good results. The aim of this work is to implement some of these algorithm and, therefore, demonstrate that rational filters, in particular, can be implemented without requiring large sized systems and they can operate at very high frequencies. Once the basic building block of a rational based system has been implemented, it can be successfully reused in many other applications. From the designer point of view, it is important to have a general framework, which makes it able to study various configurations of the system to be implemented and analyse the trade-off among the design variables. In particular, to meet the need far versatile tools far power estimation, we developed a new macro modelling technique, which allows the designer to estimate the power dissipated by a circuit quickly and accurately. The thesis is organized as follows: In chapter 1 we present some of the algorithms which have been studied for implementation. Only a brief overview is given, leaving to the interested reader some references in literature. In chapter 2 we discuss the basic architectures used for the implementations. Pipelined structures have been mainly used for this thesis, but an overview of the nowaday available approaches for timing optimization is presented. In chapter 3 we present two of the implementation designed for this thesis. The approaches followed are ASIC driven and FPGA drive. They require different techniques and different solution for the design of the system, therefore it is interesting to see what can be done in both the cases. Finally, in chapter 4, we describe our macro modelling techniques for power estimation, giving a brief overview of the up to now proposed techniques and showing the advantages our method brings to the design.XII Ciclo1969Versione digitalizzata della tesi di dottorato cartacea

Contributions to the Design of Asynchronous Macromodular Systems

In this thesis, I advocate the use of macromodules to design and build robust and performance-competitive asynchronous systems. The contributions of the work relate to different aspects of the design of asynchronous macromodular systems. First, an architectural optimization for 4-phase systems is introduced. The goal of the optimization is to increase the performance of a system by increasing the level of concurrent activity in the sequencing of data processing stages. In particular, three new asynchronous sequencers are designed, which increase the throughput of the system. Existing asynchronous data paths do not operate correctly at this increased level of concurrency: data hazards may result. Interlock mechanisms are introduced to insure correct operation. The technique can also be regarded as a low-power optimization: The increased throughput can be traded for a significant reduction in the power consumption of the entire system. SPICE simulation results show that the new sequencers allow roughly twice the throughput of non-concurrent sequencers. The simulations also show that, after voltage scaling, energy dissipation is reduced by a factor of 2.5. Second, the use of pulses for efficient inter-module synchronization is introduced. The idea is complemented with the definition of a pulse-mode handshake protocol and the characterization of Pulse-Burst Operation (PBO), an important extension to traditional pulse-mode operation. Also, a basic set of macromodules, that efficiently implement control operations such as sequencing, selection, iteration, concurrency control, resource sharing, and arbitration is presented. Modules for interfacing pulse-mode circuits with traditional 2-phase and 4-phase circuits are also included in the set. Finally, the design of a packet switch is used to demonstrate the viability of pulse-mode macromodules to implement complex, high performance systems. The switch organization, its asynchronous operation, and the low control overhead introduced by pulse-mode macromodules result in a design that can handle 2.4 times the target throughput of 155 Mbits/Sec. Also, the switch is characterized by very low input-to-output latency. These results suggest that pulse-mode macromodules can keep control overhead low without introducing complex, unsafe timing considerations, two necessary conditions to achieve robust, performance-competitive systems