A Collision Avoidance Based Energy Efficient Medium Access Control Protocol for Clustered Underwater Wireless Sensor Networks

Underwater Wireless Sensor Networks (UWSNs) are typically deployed in energy constrained environments where recharging energy sources and replacing batteries are not viable. This makes energy efficiency in UWSNs a crucial directive to be followed during Medium Access Control (MAC) design. Multiplexing and scheduling based protocols are not ideal for UWSNs because of their strict synchronization requirements, longer latencies and constrained bandwidth.This paper presents the development and simulation analysis of a novel cross-layer communication based MAC protocol called Energy Efficient Collision Avoidance (EECA) MAC protocol. EECA-MAC protocol works on the principle of adaptive power control, controlling the transmission power based on the signal strength at the receiver. EECA-MAC enhances the conventional 4-way handshake to reduce carrier sensing by implementing an enhanced Request to Send (RTS) and Clear to Send (CTS) handshake and an improved back-off algorithm.Simulation analysis shows that the measures taken to achieve energy efficiency have a direct effect on the number of packet retransmissions. Compared to the Medium Access with Collision Avoidance (MACA) protocol, EECA-MAC shows a 40% reduction in the number of packets that are delivered after retransmissions. This reduction, coupled with the reduced signal interference, results in a 16% drop in the energy utilized by the nodes for data transmission

Reducing false wake-up in contention-based wake-up control of wireless LANs

This paper studies the potential problem and performance when tightly integrating a low power wake-up radio (WuR) and a power-hungry wireless LAN (WLAN) module for energy efficient channel access. In this model, a WuR monitors the channel, performs carrier sense, and activates its co-located WLAN module when the channel becomes ready for transmission. Different from previous methods, the node that will be activated is not decided in advance, but decided by distributed contention. Because of the wake-up latency of WLAN modules, multiple nodes may be falsely activated, except the node that will actually transmit. This is called a false wake-up problem and it is solved from three aspects in this work: (i) resetting backoff counter of each node in a way as if it is frozen in a wake-up period, (ii) reducing false wake-up time by immediately putting a WLAN module into sleep once a false wake-up is inferred, and (iii) reducing false wake-up probability by adjusting contention window. Analysis shows that false wake-ups, instead of collisions, become the dominant energy overhead. Extensive simulations confirm that the proposed method (WuR-ESOC) effectively reduces energy overhead, by up to 60% compared with state-of-the-arts, achieving a better tradeoff between throughput and energy consumption

On the Impact of HARQ on the Throughput and Energy Efficiency Using Cross-Layer Analysis

This paper studies the potential improvements in terms of energy efficiency and system throughput of a hybrid automatic retransmission request (HARQ) mechanism. The analysis includes both the physical (PHY) and medium access (MAC) layers. We investigate the trade-off provided by HARQ, which demands reduced transmit power for a given target outage probability at the cost of more accesses to the channel. Since the competition for channel access at the MAC layer is very expensive in terms of energy and delay, our results show that HARQ leads to great performance improvements due to the decrease in the number of contending nodes – a consequence of the reduced required transmit power. Counter-intuitively, our analysis leads to the conclusion that retransmissions may decrease the delay, improving the system performance. Finally, we investigate the optimum values for the number of allowed retransmissions in order to maximize either the throughput or the energy efficiency

Performance analysis of feedback-free collision resolution NDMA protocol

To support communications of a large number of deployed devices while guaranteeing limited signaling load, low energy consumption, and high reliability, future cellular systems require efficient random access protocols. However, how to address the collision resolution at the receiver is still the main bottleneck of these protocols. The network-assisted diversity multiple access (NDMA) protocol solves the issue and attains the highest potential throughput at the cost of keeping devices active to acquire feedback and repeating transmissions until successful decoding. In contrast, another potential approach is the feedback-free NDMA (FF-NDMA) protocol, in which devices do repeat packets in a pre-defined number of consecutive time slots without waiting for feedback associated with repetitions. Here, we investigate the FF-NDMA protocol from a cellular network perspective in order to elucidate under what circumstances this scheme is more energy efficient than NDMA. We characterize analytically the FF-NDMA protocol along with the multipacket reception model and a finite Markov chain. Analytic expressions for throughput, delay, capture probability, energy, and energy efficiency are derived. Then, clues for system design are established according to the different trade-offs studied. Simulation results show that FF-NDMA is more energy efficient than classical NDMA and HARQ-NDMA at low signal-to-noise ratio (SNR) and at medium SNR when the load increases.Peer ReviewedPostprint (published version

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks

This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN applications having different types of data traffic with several priorities. The protocol achieves to increase Packet Reception Ratio (PRR) and reduce end-to-end delay while considering multi-queue priority policy, two-hop neighborhood information, link reliability and power efficiency. The protocol is modular and utilizes effective methods for estimating the link metrics. Numerical results show that the proposed protocol is a feasible solution to addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page