A sub-Nyquist co-prime sampling music spectral approach for natural frequency identification of white-noise excited structures

Motivated by practical needs to reduce data transmission payloads in wireless sensors for vibration-based monitoring of civil engineering structures, this paper proposes a novel approach for identifying resonant frequencies of white-noise excited structures using acceleration measurements acquired at rates significantly below the Nyquist rate. The approach adopts the deterministic co-prime sub-Nyquist sampling scheme, originally developed to facilitate telecommunication applications, to estimate the autocorrelation function of response acceleration time-histories of low-amplitude white-noise excited structures treated as realizations of a stationary stochastic process. This is achieved without posing any sparsity conditions to the signals. Next, the standard MUSIC algorithm is applied to the estimated autocorrelation function to derive a denoised super-resolution pseudo-spectrum in which natural frequencies are marked by prominent spikes. The accuracy and applicability of the proposed approach is numerically assessed using computer-generated noise-corrupted acceleration time-history data obtained by a simulation-based framework pertaining to a white-noise excited structural system with two closely-spaced modes of vibration carrying the same amount of energy, and a third isolated weakly excited vibrating mode. All three natural frequencies are accurately identified by sampling at as low as 78% below Nyquist rate for signal to noise ratio as low as 0dB (i.e., energy of additive white noise equal to the signal energy), suggesting that the proposed approach is robust and noise-immune while it can reduce data transmission requirements in acceleration wireless sensors for natural frequency identification of engineering structures

Grid-free compressive beamforming

The direction-of-arrival (DOA) estimation problem involves the localization of a few sources from a limited number of observations on an array of sensors, thus it can be formulated as a sparse signal reconstruction problem and solved efficiently with compressive sensing (CS) to achieve high-resolution imaging. On a discrete angular grid, the CS reconstruction degrades due to basis mismatch when the DOAs do not coincide with the angular directions on the grid. To overcome this limitation, a continuous formulation of the DOA problem is employed and an optimization procedure is introduced, which promotes sparsity on a continuous optimization variable. The DOA estimation problem with infinitely many unknowns, i.e., source locations and amplitudes, is solved over a few optimization variables with semidefinite programming. The grid-free CS reconstruction provides high-resolution imaging even with non-uniform arrays, single-snapshot data and under noisy conditions as demonstrated on experimental towed array data.Comment: 14 pages, 8 figures, journal pape

Direction-of-Arrival Estimation Based on Sparse Recovery with Second-Order Statistics

Traditional direction-of-arrival (DOA) estimation techniques perform Nyquist-rate sampling of the received signals and as a result they require high storage. To reduce sampling ratio, we introduce level-crossing (LC) sampling which captures samples whenever the signal crosses predetermined reference levels, and the LC-based analog-to-digital converter (LC ADC) has been shown to efficiently sample certain classes of signals. In this paper, we focus on the DOA estimation problem by using second-order statistics based on the LC samplings recording on one sensor, along with the synchronous samplings of the another sensors, a sparse angle space scenario can be found by solving an $ell_1$ minimization problem, giving the number of sources and their DOA's. The experimental results show that our proposed method, when compared with some existing norm-based constrained optimization compressive sensing (CS) algorithms, as well as subspace method, improves the DOA estimation performance, while using less samples when compared with Nyquist-rate sampling and reducing sensor activity especially for long time silence signal

Spatial Compressive Sensing for MIMO Radar

We study compressive sensing in the spatial domain to achieve target localization, specifically direction of arrival (DOA), using multiple-input multiple-output (MIMO) radar. A sparse localization framework is proposed for a MIMO array in which transmit and receive elements are placed at random. This allows for a dramatic reduction in the number of elements needed, while still attaining performance comparable to that of a filled (Nyquist) array. By leveraging properties of structured random matrices, we develop a bound on the coherence of the resulting measurement matrix, and obtain conditions under which the measurement matrix satisfies the so-called isotropy property. The coherence and isotropy concepts are used to establish uniform and non-uniform recovery guarantees within the proposed spatial compressive sensing framework. In particular, we show that non-uniform recovery is guaranteed if the product of the number of transmit and receive elements, MN (which is also the number of degrees of freedom), scales with K(log(G))^2, where K is the number of targets and G is proportional to the array aperture and determines the angle resolution. In contrast with a filled virtual MIMO array where the product MN scales linearly with G, the logarithmic dependence on G in the proposed framework supports the high-resolution provided by the virtual array aperture while using a small number of MIMO radar elements. In the numerical results we show that, in the proposed framework, compressive sensing recovery algorithms are capable of better performance than classical methods, such as beamforming and MUSIC.Comment: To appear in IEEE Transactions on Signal Processin

Building profile reconstruction using TerraSAR-X data time-series and tomographic techniques

This work aims to show the potentialities of SAR Tomography (TomoSAR) techniques for the 3-D characterization (height, reflectivity, time stability) of built-up areas using data acquired by the satellite sensor TerraSAR-X. For this purpose 19 TerraSAR-X single-polarimetric multibaseline images acquired over Paris urban area have been processed applying classical nonparametric (Beamforming and Capon) and parametric (MUSIC) spectral estimation techniques

Phase Harmonic Correlations and Convolutional Neural Networks

A major issue in harmonic analysis is to capture the phase dependence of frequency representations, which carries important signal properties. It seems that convolutional neural networks have found a way. Over time-series and images, convolutional networks often learn a first layer of filters which are well localized in the frequency domain, with different phases. We show that a rectifier then acts as a filter on the phase of the resulting coefficients. It computes signal descriptors which are local in space, frequency and phase. The non-linear phase filter becomes a multiplicative operator over phase harmonics computed with a Fourier transform along the phase. We prove that it defines a bi-Lipschitz and invertible representation. The correlations of phase harmonics coefficients characterise coherent structures from their phase dependence across frequencies. For wavelet filters, we show numerically that signals having sparse wavelet coefficients can be recovered from few phase harmonic correlations, which provide a compressive representationComment: 26 pages, 8 figure