208 research outputs found
Whether and Where to Code in the Wireless Relay Channel
The throughput benefits of random linear network codes have been studied
extensively for wirelined and wireless erasure networks. It is often assumed
that all nodes within a network perform coding operations. In
energy-constrained systems, however, coding subgraphs should be chosen to
control the number of coding nodes while maintaining throughput. In this paper,
we explore the strategic use of network coding in the wireless packet erasure
relay channel according to both throughput and energy metrics. In the relay
channel, a single source communicates to a single sink through the aid of a
half-duplex relay. The fluid flow model is used to describe the case where both
the source and the relay are coding, and Markov chain models are proposed to
describe packet evolution if only the source or only the relay is coding. In
addition to transmission energy, we take into account coding and reception
energies. We show that coding at the relay alone while operating in a rateless
fashion is neither throughput nor energy efficient. Given a set of system
parameters, our analysis determines the optimal amount of time the relay should
participate in the transmission, and where coding should be performed.Comment: 11 pages, 12 figures, to be published in the IEEE JSAC Special Issue
on Theories and Methods for Advanced Wireless Relay
Bilayer Low-Density Parity-Check Codes for Decode-and-Forward in Relay Channels
This paper describes an efficient implementation of binning for the relay
channel using low-density parity-check (LDPC) codes. We devise bilayer LDPC
codes to approach the theoretically promised rate of the decode-and-forward
relaying strategy by incorporating relay-generated information bits in
specially designed bilayer graphical code structures. While conventional LDPC
codes are sensitively tuned to operate efficiently at a certain channel
parameter, the proposed bilayer LDPC codes are capable of working at two
different channel parameters and two different rates: that at the relay and at
the destination. To analyze the performance of bilayer LDPC codes, bilayer
density evolution is devised as an extension of the standard density evolution
algorithm. Based on bilayer density evolution, a design methodology is
developed for the bilayer codes in which the degree distribution is iteratively
improved using linear programming. Further, in order to approach the
theoretical decode-and-forward rate for a wide range of channel parameters,
this paper proposes two different forms bilayer codes, the bilayer-expurgated
and bilayer-lengthened codes. It is demonstrated that a properly designed
bilayer LDPC code can achieve an asymptotic infinite-length threshold within
0.24 dB gap to the Shannon limits of two different channels simultaneously for
a wide range of channel parameters. By practical code construction,
finite-length bilayer codes are shown to be able to approach within a 0.6 dB
gap to the theoretical decode-and-forward rate of the relay channel at a block
length of and a bit-error probability (BER) of . Finally, it is
demonstrated that a generalized version of the proposed bilayer code
construction is applicable to relay networks with multiple relays.Comment: Submitted to IEEE Trans. Info. Theor
V2X Content Distribution Based on Batched Network Coding with Distributed Scheduling
Content distribution is an application in intelligent transportation system
to assist vehicles in acquiring information such as digital maps and
entertainment materials. In this paper, we consider content distribution from a
single roadside infrastructure unit to a group of vehicles passing by it. To
combat the short connection time and the lossy channel quality, the downloaded
contents need to be further shared among vehicles after the initial
broadcasting phase. To this end, we propose a joint infrastructure-to-vehicle
(I2V) and vehicle-to-vehicle (V2V) communication scheme based on batched sparse
(BATS) coding to minimize the traffic overhead and reduce the total
transmission delay. In the I2V phase, the roadside unit (RSU) encodes the
original large-size file into a number of batches in a rateless manner, each
containing a fixed number of coded packets, and sequentially broadcasts them
during the I2V connection time. In the V2V phase, vehicles perform the network
coded cooperative sharing by re-encoding the received packets. We propose a
utility-based distributed algorithm to efficiently schedule the V2V cooperative
transmissions, hence reducing the transmission delay. A closed-form expression
for the expected rank distribution of the proposed content distribution scheme
is derived, which is used to design the optimal BATS code. The performance of
the proposed content distribution scheme is evaluated by extensive simulations
that consider multi-lane road and realistic vehicular traffic settings, and
shown to significantly outperform the existing content distribution protocols.Comment: 12 pages and 9 figure
Reconfigurable rateless codes
We propose novel reconfigurable rateless codes, that are capable of not only varying the block length but also adaptively modify their encoding strategy by incrementally adjusting their degree distribution according to the prevalent channel conditions without the availability of the channel state information at the transmitter. In particular, we characterize a reconfigurable ratelesscode designed for the transmission of 9,500 information bits that achieves a performance, which is approximately 1 dB away from the discrete-input continuous-output memoryless channel’s (DCMC) capacity over a diverse range of channel signal-to-noise (SNR) ratios
Performance Analysis of NOMA Multicast Systems Based on Rateless Codes with Delay Constraints
To achieve an efficient and reliable data transmission in time-varying conditions, a novel non-orthogonal multiple access (NOMA) transmission scheme based on rateless codes (NOMA-RC) is proposed in the multicast system in this paper. Using rateless codes at the packet level, the system can generate enough encoded data packets according to users’ requirements to cope with adverse environments. The performance of the NOMA-RC multicast system with delay constraints is analyzed over Rayleigh fading channels. The closed-form expressions for the frame error ratio and the average transmission time are derived for two cases which are a broadcast communication scenario (Scenario 1) and a relay communication scenario (Scenario 2). Under the condition that the quality of service for the edge user is satisfied, an optimization model of power allocation is established to maximize the sum rate. Simulation results show that Scenario 2 can provide better block error ratio performance and exhibit less transmission time than Scenario 1. When compared with orthogonal multiple access (OMA) with rateless codes system, the proposed system can save on the transmission time and improve the system throughput
Buffer-Based Distributed LT Codes
We focus on the design of distributed Luby transform (DLT) codes for erasure
networks with multiple sources and multiple relays, communicating to a single
destination. The erasure-floor performance of DLT codes improves with the
maximum degree of the relay-degree distribution. However, for conventional DLT
codes, the maximum degree is upper-bounded by the number of sources. An
additional constraint is that the sources are required to have the same
information block length. We introduce a -bit buffer for each source-relay
link, which allows the relay to select multiple encoded bits from the same
source for the relay-encoding process; thus, the number of sources no longer
limits the maximum degree at the relay. Furthermore, the introduction of
buffers facilitates the use of different information block sizes across
sources. Based on density evolution we develop an asymptotic analytical
framework for optimization of the relay-degree distribution. We further
integrate techniques for unequal erasure protection into the optimization
framework. The proposed codes are considered for both lossless and lossy
source-relay links. Numerical examples show that there is no loss in erasure
performance for transmission over lossy source-relay links as compared to
lossless links. Additional delays, however, may occur. The design framework and
our contributions are demonstrated by a number of illustrative examples,
showing the improvements obtained by the proposed buffer-based DLT codes.Comment: 14 pages, 17 figures, submitte
- …