State-of-the art of acousto-optic sensing and imaging of turbid media

Acousto-optic (AO) is an emerging hybrid technique for measuring optical contrast in turbid media using coherent light and ultrasound (US). A turbid object is illuminated with a coherent light source leading to speckle formation in the remitted light. With the use of US, a small volume is selected,which is commonly referred to as the “tagging” volume. This volume acts as a source of modulated light, where modulation might involve phase and intensity change. The tagging volume is created by focusing ultrasound for good lateral resolution; the axial resolution is accomplished by making either the US frequency, amplitude, or phase time-dependent. Typical resolutions are in the order of 1 mm. We will concentrate on the progress in the field since 2003. Different schemes will be discussed to detect the modulated photons based on speckle detection, heterodyne detection, photorefractive crystal (PRC) assisted detection, and spectral hole burning (SHB) as well as Fabry-Perot interferometers. The SHB and Fabry-Perot interferometer techniques are insensitive to speckle decorrelation and therefore suitable for in vivo imaging. However, heterodyne and PRC methods also have potential for in vivo measurements. Besides measuring optical properties such as scattering and absorption, AO can be applied in fluorescence and elastography applications

Noninvasive depth estimation using tissue optical properties and a dual-wavelength fluorescent molecular probe in vivo

Translation of fluorescence imaging using molecularly targeted imaging agents for real-time assessment of surgical margins in the operating room requires a fast and reliable method to predict tumor depth from planar optical imaging. Here, we developed a dual-wavelength fluorescent molecular probe with distinct visible and near-infrared excitation and emission spectra for depth estimation in mice and a method to predict the optical properties of the imaging medium such that the technique is applicable to a range of medium types. Imaging was conducted at two wavelengths in a simulated blood vessel and an in vivo tumor model. Although the depth estimation method was insensitive to changes in the molecular probe concentration, it was responsive to the optical parameters of the medium. Results of the intra-tumor fluorescent probe injection showed that the average measured tumor sub-surface depths were 1.31 ± 0.442 mm, 1.07 ± 0.187 mm, and 1.42 ± 0.182 mm, and the average estimated sub-surface depths were 0.97 ± 0.308 mm, 1.11 ± 0.428 mm, 1.21 ± 0.492 mm, respectively. Intravenous injection of the molecular probe allowed for selective tumor accumulation, with measured tumor sub-surface depths of 1.28 ± 0.168 mm, and 1.50 ± 0.394 mm, and the estimated depths were 1.46 ± 0.314 mm, and 1.60 ± 0.409 mm, respectively. Expansion of our technique by using material optical properties and mouse skin optical parameters to estimate the sub-surface depth of a tumor demonstrated an agreement between measured and estimated depth within 0.38 mm and 0.63 mm for intra-tumor and intravenous dye injections, respectively. Our results demonstrate the feasibility of dual-wavelength imaging for determining the depth of blood vessels and characterizing the sub-surface depth of tumors in vivo

Determination of tissue optical properties by steady-state spatial frequency-domain reflectometry

A new non-invasive method to measure the optical properties of biological tissue is described. This method consists of illuminating the investigated sample with light which is spatially periodically modulated in intensity. The spatial modulation of the backscattered light and the diffuse reflectivity of the sample, both detected with an imaging technique, are used to deduce the absorption and reduced scattering coefficient from a table generated by Monte Carlo simulations. This principle has three major advantages: Firstly, it permits the immediate acquisition of the average values of the optical coefficients over a relatively large area (typ. 20 mm in diameter), thus avoiding the perturbations generated by small tissue heterogeneities; It also provides good flexibility for measuring the optical coefficients at various wavelengths and it does not require the use of a detector with a large dynamic range. The method was first validated on phantoms with known optical properties. Finally, we measured the optical properties of human skin at 400 nm, 500 nm, 633 nm and 700 nm in viv

Online object oriented Monte Carlo computational tool for the needs of biomedical optics

Conceptual engineering design and optimization of laser-based imaging techniques and optical diagnostic systems used in the field of biomedical optics requires a clear understanding of the light-tissue interaction and peculiarities of localization of the detected optical radiation within the medium. The description of photon migration within the turbid tissue-like media is based on the concept of radiative transfer that forms a basis of Monte Carlo (MC) modeling. An opportunity of direct simulation of influence of structural variations of biological tissues on the probing light makes MC a primary tool for biomedical optics and optical engineering. Due to the diversity of optical modalities utilizing different properties of light and mechanisms of light-tissue interactions a new MC code is typically required to be developed for the particular diagnostic application. In current paper introducing an object oriented concept of MC modeling and utilizing modern web applications we present the generalized online computational tool suitable for the major applications in biophotonics. The computation is supported by NVIDEA CUDA Graphics Processing Unit providing acceleration of modeling up to 340 times

Monte Carlo modelling of Raman scattering in heterogeneous breast tissue

Breast cancer is the most common cancer for a woman to develop in her lifetime. By detecting breast cancer at an early stage, the symptoms can be easier to manage and the patient should have the best chance of survival. The current gold standard for breast cancer detection is a mammogram, followed by a biopsy and histopathology. This is effective but can also be expensive and invasive. A promising addition to the diagnostic pathway uses vibrational spectroscopy which utilises non-elastic interactions between light and tissue. Raman spectroscopy has been used widely in industry and research: it is a non-invasive and chemically specific technique. This spectroscopic technique has been proven to be applicable to the detection of microcalcifications in breast tissue to aid in diagnosing breast cancer and potentially reducing the number of biopsies required. This thesis involves the development of algorithms to model Raman scattering in biological tissues to aid in the improvement of breast cancer detection. The technique used is the numerical modelling method Monte Carlo Radiative Transport (MCRT) to effectively simulate the transport of light through turbid media. There is a need for a fast and flexible code capable of modelling a variety of Raman source materials, tissue types and shapes, input laser beams and detectors. This rapid simulation of light transport through breast tissue can provide more information and insight to complement the practical measurements and analysis of experimental work, which can be used to improve future experiments and probes. By implementing physically correct Raman scattering into a fast and powerful code, and utilising work from the field to estimate the optical properties of tissues, simulations to supplement experimental work and predict potential clinical results are performed and analysed