Personal mobile grids with a honeybee inspired resource scheduler

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The overall aim of the thesis has been to introduce Personal Mobile Grids (PMGrids) as a novel paradigm in grid computing that scales grid infrastructures to mobile devices and extends grid entities to individual personal users. In this thesis, architectural designs as well as simulation models for PM-Grids are developed. The core of any grid system is its resource scheduler. However, virtually all current conventional grid schedulers do not address the non-clairvoyant scheduling problem, where job information is not available before the end of execution. Therefore, this thesis proposes a honeybee inspired resource scheduling heuristic for PM-Grids (HoPe) incorporating a radical approach to grid resource scheduling to tackle this problem. A detailed design and implementation of HoPe with a decentralised self-management and adaptive policy are initiated. Among the other main contributions are a comprehensive taxonomy of grid systems as well as a detailed analysis of the honeybee colony and its nectar acquisition process (NAP), from the resource scheduling perspective, which have not been presented in any previous work, to the best of our knowledge. PM-Grid designs and HoPe implementation were evaluated thoroughly through a strictly controlled empirical evaluation framework with a well-established heuristic in high throughput computing, the opportunistic scheduling heuristic (OSH), as a benchmark algorithm. Comparisons with optimal values and worst bounds are conducted to gain a clear insight into HoPe behaviour, in terms of stability, throughput, turnaround time and speedup, under different running conditions of number of jobs and grid scales. Experimental results demonstrate the superiority of HoPe performance where it has successfully maintained optimum stability and throughput in more than 95% of the experiments, with HoPe achieving three times better than the OSH under extremely heavy loads. Regarding the turnaround time and speedup, HoPe has effectively achieved less than 50% of the turnaround time incurred by the OSH, while doubling its speedup in more than 60% of the experiments. These results indicate the potential of both PM-Grids and HoPe in realising futuristic grid visions. Therefore considering the deployment of PM-Grids in real life scenarios and the utilisation of HoPe in other parallel processing and high throughput computing systems are recommended

Personal mobile grids with a honeybee inspired resource scheduler

The overall aim of the thesis has been to introduce Personal Mobile Grids (PMGrids) as a novel paradigm in grid computing that scales grid infrastructures to mobile devices and extends grid entities to individual personal users. In this thesis, architectural designs as well as simulation models for PM-Grids are developed. The core of any grid system is its resource scheduler. However, virtually all current conventional grid schedulers do not address the non-clairvoyant scheduling problem, where job information is not available before the end of execution. Therefore, this thesis proposes a honeybee inspired resource scheduling heuristic for PM-Grids (HoPe) incorporating a radical approach to grid resource scheduling to tackle this problem. A detailed design and implementation of HoPe with a decentralised self-management and adaptive policy are initiated. Among the other main contributions are a comprehensive taxonomy of grid systems as well as a detailed analysis of the honeybee colony and its nectar acquisition process (NAP), from the resource scheduling perspective, which have not been presented in any previous work, to the best of our knowledge. PM-Grid designs and HoPe implementation were evaluated thoroughly through a strictly controlled empirical evaluation framework with a well-established heuristic in high throughput computing, the opportunistic scheduling heuristic (OSH), as a benchmark algorithm. Comparisons with optimal values and worst bounds are conducted to gain a clear insight into HoPe behaviour, in terms of stability, throughput, turnaround time and speedup, under different running conditions of number of jobs and grid scales. Experimental results demonstrate the superiority of HoPe performance where it has successfully maintained optimum stability and throughput in more than 95% of the experiments, with HoPe achieving three times better than the OSH under extremely heavy loads. Regarding the turnaround time and speedup, HoPe has effectively achieved less than 50% of the turnaround time incurred by the OSH, while doubling its speedup in more than 60% of the experiments. These results indicate the potential of both PM-Grids and HoPe in realising futuristic grid visions. Therefore considering the deployment of PM-Grids in real life scenarios and the utilisation of HoPe in other parallel processing and high throughput computing systems are recommended.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Acceleration Techniques for Sparse Recovery Based Plane-wave Decomposition of a Sound Field

Plane-wave decomposition by sparse recovery is a reliable and accurate technique for plane-wave decomposition which can be used for source localization, beamforming, etc. In this work, we introduce techniques to accelerate the plane-wave decomposition by sparse recovery. The method consists of two main algorithms which are spherical Fourier transformation (SFT) and sparse recovery. Comparing the two algorithms, the sparse recovery is the most computationally intensive. We implement the SFT on an FPGA and the sparse recovery on a multithreaded computing platform. Then the multithreaded computing platform could be fully utilized for the sparse recovery. On the other hand, implementing the SFT on an FPGA helps to flexibly integrate the microphones and improve the portability of the microphone array. For implementing the SFT on an FPGA, we develop a scalable FPGA design model that enables the quick design of the SFT architecture on FPGAs. The model considers the number of microphones, the number of SFT channels and the cost of the FPGA and provides the design of a resource optimized and cost-effective FPGA architecture as the output. Then we investigate the performance of the sparse recovery algorithm executed on various multithreaded computing platforms (i.e., chip-multiprocessor, multiprocessor, GPU, manycore). Finally, we investigate the influence of modifying the dictionary size on the computational performance and the accuracy of the sparse recovery algorithms. We introduce novel sparse-recovery techniques which use non-uniform dictionaries to improve the performance of the sparse recovery on a parallel architecture

Cogitator : a parallel, fuzzy, database-driven expert system

The quest to build anthropomorphic machines has led researchers to focus on knowledge and the manipulation thereof. Recently, the expert system was proposed as a solution, working well in small, well understood domains. However these initial attempts highlighted the tedious process associated with building systems to display intelligence, the most notable being the Knowledge Acquisition Bottleneck. Attempts to circumvent this problem have led researchers to propose the use of machine learning databases as a source of knowledge. Attempts to utilise databases as sources of knowledge has led to the development Database-Driven Expert Systems. Furthermore, it has been ascertained that a requisite for intelligent systems is powerful computation. In response to these problems and proposals, a new type of database-driven expert system, Cogitator is proposed. It is shown to circumvent the Knowledge Acquisition Bottleneck and posess many other advantages over both traditional expert systems and connectionist systems, whilst having non-serious disadvantages.KMBT_22

Automated Collection Of Honey Bee Hive Data Using The Raspberry Pi

In recent years beekeepers have faced significant losses to their populations of managed honey bees, a phenomenon known as Colony Collapse Disorder (CCD). Many researchers are studying CCD, attempting to determine its cause and how its effects can be mitigated. Some research efforts have focused on the analysis of bee hive audio and video recordings to better understand the behavior of bees and the health of the hive. To provide data for this research, it is important to have a means of capturing audio, video, and other sensor data, using a system that is reliable, inexpensive, and causes minimal disruption to the bees’ behavior. This thesis details the design and implementation of a data collection system, known as BeeMon, which is based around the Raspberry Pi. This system automatically captures sensor data and sends it to a remote server for analysis. With the ability to operate continuously in an outdoor apiary environment, it allows for constant, near real-time data collection. The results of several years of real world operation are discussed, as well as some research that has used the data collected

Supporting distributed computation over wide area gigabit networks

The advent of high bandwidth fibre optic links that may be used over very large distances has lead to much research and development in the field of wide area gigabit networking. One problem that needs to be addressed is how loosely coupled distributed systems may be built over these links, allowing many computers worldwide to take part in complex calculations in order to solve "Grand Challenge" problems. The research conducted as part of this PhD has looked at the practicality of implementing a communication mechanism proposed by Craig Partridge called Late-binding Remote Procedure Calls (LbRPC). LbRPC is intended to export both code and data over the network to remote machines for evaluation, as opposed to traditional RPC mechanisms that only send parameters to pre-existing remote procedures. The ability to send code as well as data means that LbRPC requests can overcome one of the biggest problems in Wide Area Distributed Computer Systems (WADCS): the fixed latency due to the speed of light. As machines get faster, the fixed multi-millisecond round trip delay equates to ever increasing numbers of CPU cycles. For a WADCS to be efficient, programs should minimise the number of network transits they incur. By allowing the application programmer to export arbitrary code to the remote machine, this may be achieved. This research has looked at the feasibility of supporting secure exportation of arbitrary code and data in heterogeneous, loosely coupled, distributed computing environments. It has investigated techniques for making placement decisions for the code in cases where there are a large number of widely dispersed remote servers that could be used. The latter has resulted in the development of a novel prototype LbRPC using multicast IP for implicit placement and a sequenced, multi-packet saturation multicast transport protocol. These prototypes show that it is possible to export code and data to multiple remote hosts, thereby removing the need to perform complex and error prone explicit process placement decisions