Bridging the Testing Speed Gap: Design for Delay Testability

The economic testing of high-speed digital ICs is becoming increasingly problematic. Even advanced, expensive testers are not always capable of testing these ICs because of their high-speed limitations. This paper focuses on a design for delay testability technique such that high-speed ICs can be tested using inexpensive, low-speed ATE. Also extensions for possible full BIST of delay faults are addresse

A low-speed BIST framework for high-performance circuit testing

Testing of high performance integrated circuits is becoming increasingly a challenging task owing to high clock frequencies. Often testers are not able to test such devices due to their limited high frequency capabilities. In this article we outline a design-for-test methodology such that high performance devices can be tested on relatively low performance testers. In addition, a BIST framework is discussed based on this methodology. Various implementation aspects of this technique are also addresse

FPGA ARCHITECTURE AND VERIFICATION OF BUILT IN SELF-TEST (BIST) FOR 32-BIT ADDER/SUBTRACTER USING DE0-NANO FPGA AND ANALOG DISCOVERY 2 HARDWARE

The integrated circuit (IC) is an integral part of everyday modern technology, and its application is very attractive to hardware and software design engineers because of its versatility, integration, power consumption, cost, and board area reduction. IC is available in various types such as Field Programming Gate Array (FPGA), Application Specific Integrated Circuit (ASIC), System on Chip (SoC) architecture, Digital Signal Processing (DSP), microcontrollers (μC), and many more. With technology demand focused on faster, low power consumption, efficient IC application, design engineers are facing tremendous challenges in developing and testing integrated circuits that guaranty functionality, high fault coverage, and reliability as the transistor technology is shrinking to the point where manufacturing defects of ICs are affecting yield which associates with the increased cost of the part. The competitive IC market is pressuring manufactures of ICs to develop and market IC in a relatively quick turnaround which in return requires design and verification engineers to develop an integrated self-test structure that would ensure fault-free and the quality product is delivered on the market. 70-80% of IC design is spent on verification and testing to ensure high quality and reliability for the enduser. To test complex and sophisticated IC designs, the verification engineers must produce laborious and costly test fixtures which affect the cost of the part on the competitive market. To avoid increasing the part cost due to yield and test time to the end-user and to keep up with the competitive market many IC design engineers are deviating from complex external test fixture approach and are focusing on integrating Built-in Self-Test (BIST) or Design for Test (DFT) techniques onto IC’s which would reduce time to market but still guarantee high coverage for the product. Understanding the BIST, the architecture, as well as the application of IC, must be understood before developing IC. The architecture of FPGA is elaborated in this paper followed by several BIST techniques and applications of those BIST relative to FPGA, SoC, analog to digital (ADC), or digital to analog converters (DAC) that are integrated on IC. Paper is concluded with verification of BIST for the 32-bit adder/subtracter designed in Quartus II software using the Analog Discovery 2 module as stimulus and DE0-NANO FPGA board for verification

A Flexible Power Control Method for Right Power Testing of Scan-Based Logic BIST

High power dissipation during scan-based logic BIST is a crucial problem that leads to over-testing. Although controlling test power of a circuit under test (CUT) to an appropriate level is strongly required, it is not easy to control test power in BIST. This paper proposes a novel power controlling method to control the toggle rate of the patterns to an arbitrary level by modifying pseudo random patterns generated by a TPG (Test Pattern Generator) of logic BIST. While many approaches have been proposed to control the toggle rate of the patterns, the proposed approach can provide higher fault coverage. Experimental results show that the proposed approach can control toggle rates to a predetermined target level and modified patterns can achieve high fault coverage without increasing test time.2016 IEEE 25th Asian Test Symposium (ATS), 21-24 Nov. 2016, Hiroshima, Japa

Design for testability of a latch-based design

Abstract. The purpose of this thesis was to decrease the area of digital logic in a power management integrated circuit (PMIC), by replacing selected flip-flops with latches. The thesis consists of a theory part, that provides background theory for the thesis, and a practical part, that presents a latch register design and design for testability (DFT) method for achieving an acceptable level of manufacturing fault coverage for it. The total area was decreased by replacing flip-flops of read-write and one-time programmable registers with latches. One set of negative level active primary latches were shared with all the positive level active latch registers in the same register bank. Clock gating was used to select which latch register the write data was loaded to from the primary latches. The latches were made transparent during the shift operation of partial scan testing. The observability of the latch register clock gating logic was improved by leaving the first bit of each latch register as a flip-flop. The controllability was improved by inserting control points. The latch register design, developed in this thesis, resulted in a total area decrease of 5% and a register bank area decrease of 15% compared to a flip-flop-based reference design. The latch register design manages to maintain the same stuck-at fault coverage as the reference design.Salpaperäisen piirin testattavuuden suunnittelu. Tiivistelmä. Tämän opinnäytetyön tarkoituksena oli pienentää digitaalisen logiikan pinta-alaa integroidussa tehonhallintapiirissä, korvaamalla valitut kiikut salpapiireillä. Opinnäytetyö koostuu teoriaosasta, joka antaa taustatietoa opinnäytetyölle, ja käytännön osuudesta, jossa esitellään salparekisteripiiri ja testattavuussuunnittelun menetelmä, jolla saavutettiin riittävän hyvä virhekattavuus salparekisteripiirille. Kokonaispinta-alaa pienennettiin korvaamalla luku-kirjoitusrekistereiden ja kerran ohjelmoitavien rekistereiden kiikut salpapiireillä. Yhdet negatiivisella tasolla aktiiviset isäntä-salpapiirit jaettiin kaikkien samassa rekisteripankissa olevien positiivisella tasolla aktiivisten salparekistereiden kanssa. Kellon portittamisella valittiin mihin salparekisteriin kirjoitusdata ladattiin yhteisistä isäntä-salpapireistä. Osittaisessa testipolkuihin perustuvassa testauksessa salpapiirit tehtiin läpinäkyviksi siirtooperaation aikana. Salparekisterin kellon portituslogiikan havaittavuutta parannettiin jättämällä jokaisen salparekisterin ensimmäinen bitti kiikuksi. Ohjattavuutta parannettiin lisäämällä ohjauspisteitä. Salparekisteripiiri, joka suunniteltiin tässä diplomityössä, pienensi kokonaispinta-alaa 5 % ja rekisteripankin pinta-alaa 15 % verrattuna kiikkuperäiseen vertailupiiriin. Salparekisteripiiri onnistuu pitämään saman juuttumisvikamallin virhekattavuuden kuin vertailupiiri

Design of a Scan Chain for Side Channel Attacks on AES Cryptosystem for Improved Security

Scan chain-based attacks are side-channel attacks focusing on one of the most significant features of hardware test circuitry. A technique called Design for Testability (DfT) involves integrating certain testability components into a hardware design. However, this creates a side channel for cryptanalysis, providing crypto devices vulnerable to scan-based attacks. Advanced Encryption Standard (AES) has been proven as the most powerful and secure symmetric encryption algorithm announced by USA Government and it outperforms all other existing cryptographic algorithms. Furthermore, the on-chip implementation of private key algorithms like AES has faced scan-based side-channel attacks. With the aim of protecting the data for secure communication, a new hybrid pipelined AES algorithm with enhanced security features is implemented. This paper proposes testing an AES core with unpredictable response compaction and bit level-masking throughout the scan chain process. A bit-level scan flipflop focused on masking as a scan protection solution for secure testing. The experimental results show that the best security is provided by the randomized addition of masked scan flipflop through the scan chain and also provides minimal design difficulty and power expansion overhead with some negligible delay measures. Thus, the proposed technique outperforms the state-of-the-art LUT-based S-box and the composite sub-byte transformation model regarding throughput rate 2 times and 15 times respectively. And security measured in the avalanche effect for the sub-pipelined model has been increased up to 95 per cent with reduced computational complexity. Also, the proposed sub-pipelined S-box utilizing a composite field arithmetic scheme achieves 7 per cent area effectiveness and 2.5 times the hardware complexity compared to the LUT-based model

A Framework for the Detection of Crosstalk Noise in FPGAs

In recent years, crosstalk noise has emerged a serious problem because more and more devices and wires have been packed on electronic chips. As integrated circuits are migrated to more advanced technologies, it has become clear that crosstalk noise is the important phenomenon that must be taken into account. Despite of being more immune to crosstalk noise than their ASIC (application specific integrated circuit) counterparts, the dense interconnected structures of FPGAs (field programmable gate arrays) invite more vulnerabilities with crosstalk noise. Due to the lack of electrical detail concerning FPGA devices it is quite difficult to test the faults affected by crosstalk noise. This paper proposes a new approach for detecting the effects such as glitches and delays in transition that are due to crosstalk noise in FPGAs. This approach is similar to the BIST (built-in self test) technique in that it incorporates the test pattern generator to generate the test vectors and the analyzer to analyze the crosstalk faults without any overhead for testing

Integration of a Digital Built-in Self-Test for On-Chip Memories

The ability of testing on-chip circuitry is extremely essential to ASIC implemen- tations today. However, providing functional tests and verification for on-chip (embedded) memories always poses a huge number of challenges to the designer. Therefore, a co-existing automated built-in self-test block with the Design Under Test (DUT) seems crucial to provide comprehensive, efficient and robust testing features. The target DUT of this thesis project is the state-of-the-arts Ultra Low Power (ULP) dual-port SRAMs designed in ASIC group of EIT department at Lund University. This thesis starts from system RTL modeling and verification from an earlier project, and then goes through ASIC design phase in 28 nm FD-SOI technology from ST-Microelectronics. All scripts during the ASIC design phase are developed in TCL. This design is implemented with multiple power domains (using CPF approach and introducing level-shifters at crossing-points between domains) and multiple clock sources in order to make it possible to perform various measurements with a high reliability on different flavours of a dual-port SRAM.This design is able to reduce dramatically the complexity of verification and measurement to integrated memories. This digital integrated circuit (IC) is developed as an application-specific IC (ASIC) chip for functional verification of integrated memories and measuring them in different aspects such as power consumption. The design is automated and capable of being reconfigured easily in terms of required actions and data for testing on-chip memories. Put it in other words, this design has automated and optimized the generation of what data to be stored on which location on memories as well as how they have been treated and interpreted later on. For instance, it refreshes and delivers different operation modes and working patterns to the entire test system in order to fully utilize integrated memories, of which such an automation is instructed by the stimuli to the chip. Besides, the pattern generation of the stimuli is implemented on MATLAB in an automated way. Due to constant advancements in chip manufacturing technology, more devices are squeezed into the same silicon area. Meaning that in order to monitor more internal signals introduced by the increased complexity of the circuits, more dedicated input/output ports (the physical interface between the chip internal signals and outside world) are required, that makes the chip bonding and testing in the future difficult and time-consuming. Additionally, memories usually have a bigger number of pins for signal reactions than other circuit blocks do, the method of dealing with so many pins should also be taken into account. Thus, a few techniques are adopted in this system to assist the designers deal with all mentioned issues. Once the ASIC chip has been fabricated (manufactured) and bonded, the on-chip memories can be tested directly on a printed circuit board in a simple and flexible way: Once test instruction input is loaded into the chip, the system starts to update the system settings and then to generate the internal configurations(parameters) so that all different operations, modes or instructions related to memory testing are automatically processed