1,873 research outputs found
Synthetic aperture radar/LANDSAT MSS image registration
Algorithms and procedures necessary to merge aircraft synthetic aperture radar (SAR) and LANDSAT multispectral scanner (MSS) imagery were determined. The design of a SAR/LANDSAT data merging system was developed. Aircraft SAR images were registered to the corresponding LANDSAT MSS scenes and were the subject of experimental investigations. Results indicate that the registration of SAR imagery with LANDSAT MSS imagery is feasible from a technical viewpoint, and useful from an information-content viewpoint
Fusion of Urban TanDEM-X raw DEMs using variational models
Recently, a new global Digital Elevation Model (DEM) with pixel spacing of
0.4 arcseconds and relative height accuracy finer than 2m for flat areas
(slopes 20%) was created
through the TanDEM-X mission. One important step of the chain of global DEM
generation is to mosaic and fuse multiple raw DEM tiles to reach the target
height accuracy. Currently, Weighted Averaging (WA) is applied as a fast and
simple method for TanDEM-X raw DEM fusion in which the weights are computed
from height error maps delivered from the Interferometric TanDEM-X Processor
(ITP). However, evaluations show that WA is not the perfect DEM fusion method
for urban areas especially in confrontation with edges such as building
outlines. The main focus of this paper is to investigate more advanced
variational approaches such as TV-L1 and Huber models. Furthermore, we also
assess the performance of variational models for fusing raw DEMs produced from
data takes with different baseline configurations and height of ambiguities.
The results illustrate the high efficiency of variational models for TanDEM-X
raw DEM fusion in comparison to WA. Using variational models could improve the
DEM quality by up to 2m particularly in inner-city subsets.Comment: This is the pre-acceptance version, to read the final version, please
go to IEEE Journal of Selected Topics in Applied Earth Observations and
Remote Sensing on IEEE Xplor
Automated extraction of the Antarctic coastline using snakes
In this paper we present an automatic approach for coastline detection from images which is based on parametric active contours (snakes). Snakes require the definition of an energy functional that reflects the underlying coastline model. As for Antarctica, our application domain, the coastline appearance in the used optical images is heterogeneous. Therefore, a single model does not work equally well in all situations. On the basis of an up-to-date Landsat mosaic three different models are formulated that match a large part of the Antarctic coastline, i.e. the transition from ice shelf to water, from ice shelf to sea ice and from rocky terrain to water. For each of the three different cases the energy terms are optimized based on the radiometric properties of the adjacent regions as well as the curvature and the potential change-rate of the coastline itself. A supervised classification for the three classes ice, water and rocky terrain controls the whole process by choosing the most applicable model for a certain image region. With a view to the practical application the developed approach was integrated into a semiautomatic system, where the human operator supervises the optimization process of the contour and interactively corrects the results if the system fails
Towards Automatic SAR-Optical Stereogrammetry over Urban Areas using Very High Resolution Imagery
In this paper we discuss the potential and challenges regarding SAR-optical
stereogrammetry for urban areas, using very-high-resolution (VHR) remote
sensing imagery. Since we do this mainly from a geometrical point of view, we
first analyze the height reconstruction accuracy to be expected for different
stereogrammetric configurations. Then, we propose a strategy for simultaneous
tie point matching and 3D reconstruction, which exploits an epipolar-like
search window constraint. To drive the matching and ensure some robustness, we
combine different established handcrafted similarity measures. For the
experiments, we use real test data acquired by the Worldview-2, TerraSAR-X and
MEMPHIS sensors. Our results show that SAR-optical stereogrammetry using VHR
imagery is generally feasible with 3D positioning accuracies in the
meter-domain, although the matching of these strongly hetereogeneous
multi-sensor data remains very challenging. Keywords: Synthetic Aperture Radar
(SAR), optical images, remote sensing, data fusion, stereogrammetr
Airborne photogrammetry and LIDAR for DSM extraction and 3D change detection over an urban area : a comparative study
A digital surface model (DSM) extracted from stereoscopic aerial images, acquired in March 2000, is compared with a DSM derived from airborne light detection and ranging (lidar) data collected in July 2009. Three densely built-up study areas in the city centre of Ghent, Belgium, are selected, each covering approximately 0.4 km(2). The surface models, generated from the two different 3D acquisition methods, are compared qualitatively and quantitatively as to what extent they are suitable in modelling an urban environment, in particular for the 3D reconstruction of buildings. Then the data sets, which are acquired at two different epochs t(1) and t(2), are investigated as to what extent 3D (building) changes can be detected and modelled over the time interval. A difference model, generated by pixel-wise subtracting of both DSMs, indicates changes in elevation. Filters are proposed to differentiate 'real' building changes from false alarms provoked by model noise, outliers, vegetation, etc. A final 3D building change model maps all destructed and newly constructed buildings within the time interval t(2) - t(1). Based on the change model, the surface and volume of the building changes can be quantified
- …