High-frequency issues using rotating voltage injections intended for position self-sensing

The rotor position is required in many control schemes in electrical drives. Replacing position sensors by machine self-sensing estimators increases reliability and reduces cost. Solutions based on tracking magnetic anisotropies through the monitoring of the incremental inductance variations are efficient at low-speed and standstill operations. This inductance can be estimated by measuring the response to the injection of high-frequency signals. In general however, the selection of the optimal frequency is not addressed thoroughly. In this paper, we propose discrete-time operations based on a rotating voltage injection at frequencies up to one third of the sampling frequency used by the digital controller. The impact on the rotation-drive, the computational requirement, the robustness and the effect of the resistance on the position estimation are analyzed regarding the signal frequency

Market fields structure & dynamics in industrial automation

There is a research tradition in the economics of standards which addresses standards wars, antitrust concerns or positive externalities from standards. Recent research has also dealt with the process characteristics of standardisation, de facto standard-setting consortia and intellectual property concerns in the technology specification or implementation phase. Nonetheless, there are no studies which analyse capabilities, comparative industry dynamics or incentive structures sufficiently in the context of standard-setting. In my study, I address the characteristics of collaborative research and standard-setting as a new mode of deploying assets beyond motivations well-known from R&D consortia or market alliances. On the basis of a case study of a leading user organisation in the market for industrial automation technology, but also a descriptive network analysis of cross-community affiliations, I demonstrate that there must be a paradoxical relationship between cooperation and competition. More precisely, I explain how there can be a dual relationship between value creation and value capture respecting exploration and exploitation. My case study emphasises the dynamics between knowledge stocks (knowledge alignment, narrowing and deepening) produced by collaborative standard setting and innovation; it also sheds light on an evolutional relationship between the exploration of assets and use cases and each firm's exploitation activities in the market. I derive standard-setting capabilities from an empirical analysis of membership structures, policies and incumbent firm characteristics in selected, but leading, user organisations. The results are as follows: the market for industrial automation technology is characterised by collaboration on standards, high technology influences of other industries and network effects on standards. Further, system integrators play a decisive role in value creation in the customer-specific business case. Standard-setting activities appear to be loosely coupled to the products offered on the market. Core leaders in world standards in industrial automation own a variety of assets and they are affiliated to many standard-setting communities rather than exclusively committed to a few standards. Furthermore, their R&D ratios outperform those of peripheral members and experience in standard-setting processes can be assumed. Standard-setting communities specify common core concepts as the basis for the development of each member's proprietary products, complementary technologies and industrial services. From a knowledge-based perspective, the targeted disclosure of certain knowledge can be used to achieve high innovation returns through systemic products which add proprietary features to open standards. Finally, the interplay between exploitation and exploration respecting the deployment of standard-setting capabilities linked to cooperative, pre-competitive processes leads to an evolution in common technology owned and exploited by the standard-setting community as a particular kind of innovation ecosystem. --standard-setting,innovation,industry dynamics and context,industrial automation

Limits to Modularity: A Review of the Literature and Evidence from Chip Design

This working paper has been prepared as part of the East-West Center's research project on Globalization of Knowledge Work: Why is Chip Design Moving to Asia. In this paper, Dieter assesses what we know about the limits to modularity and their impact on firm organization and industry structure. He focuses on evidence form chip design, drawing on interview on 2002 and 2003 with a sample of 60 companies and 15 research institutions that are involved in chip design in the US, Taiwan, Korea, China and Malaysia. It is summarized "stylized" propositions of the modularity literature that are well-established, as well as predictions that are controversial. In addition, important limits to modularity and relevant management responses were reviewed.

Design Drives - materials innovation

Design Drives Materials Innovation‘ outlines the potential of a D:STEM (Design, Science, Technology, Engineering amd Mathematics) approach to combining traditionally different fields through design-led, needs driven and technology anchored future products using electro/photo/bio-active polymers in physical formats defined in ‚dots, lines, surfaces and structures‘.It also identifies Ambient Assisted Living as a key driver for future applications

Torque prediction using the flux-MMF diagram in AC, DC, and reluctance motors

This paper uses the flux-MMF diagram to compare and contrast the torque production mechanism in seven common types of electric motor. The flux-MMF diagram is a generalized version of the flux-linkage versus current (ψ-i) diagram for switched-reluctance motors. It is illustrated for switched-reluctance, synchronous-reluctance, induction, brushless AC, brushless DC, interior PM and commutator motors. The calculated flux-MMF diagrams for motors with the same electromagnetic volume, airgap, slotfill, and total copper loss are shown and are used to compare the low-speed torque and torque ripple performance. The motor designs used were reasonably optimized using a combination of commercially available motor CAD packages and finite-element analysis

Information technology as boundary object for transformational learning

Collaborative work is considered as a way to improve productivity and value generation in construction. However, recent research demonstrates that socio-cognitive factors related to fragmentation of specialized knowledge may hinder team performance. New methods based on theories of practice are emerging in Computer Supported Collaborative Work and organisational learning to break these knowledge boundaries, facilitating knowledge sharing and the generation of new knowledge through transformational learning. According to these theories, objects used in professional practice play a key role in mediating interactions. Rules and methods related to these practices are also embedded in these objects. Therefore changing collaborative patterns demand reconfiguring objects that are at the boundary between specialized practices, namely boundary objects. This research is unique in presenting an IT strategy in which technology is used as a boundary object to facilitate transformational learning in collaborative design work

Printed Circuit Board (PCB) design process and fabrication

This module describes main characteristics of Printed Circuit Boards (PCBs). A brief history of PCBs is introduced in the first chapter. Then, the design processes and the fabrication of PCBs are addressed and finally a study case is presented in the last chapter of the module.Peer ReviewedPostprint (published version

Networking Innovation in the European Car Industry : Does the Open Innovation Model Fit?

The automobile industry is has entered an innovation race. Uncertain technological trends, long development cycles, highly capital intensive product development, saturated markets, and environmental and safety regulations have subjected the sector to major transformations. The technological and organizational innovations related to these transformations necessitate research that can enhance our understanding of the characteristics of the new systems and extrapolate the implications for companies as well as for the wider economy. Is the industry ready to change and accelerate the pace of its innovation and adaptability? Have the traditional supply chains transformed into supply networks and regional automobile ecosystems? The study investigates the applicability of the Open Innovation concept to a mature capital-intensive asset-based industry, which is preparing for a radical technological discontinuity - the European automobile industry - through interviewing purposely selected knowledgeable respondents across seven European countries. The findings contribute to the understanding of the OI concept by identifying key obstacles to the wider adoption of the OI model, and signalling the importance of intermediaries and large incumbents for driving network development and OI practices as well as the need of new competencies to be developed by all players.Peer reviewe