A cross layer multi hop network architecture for wireless Ad Hoc networks

In this paper, a novel decentralized cross-layer multi-hop cooperative network architecture is presented. Our architecture involves the design of a simple yet efficient cooperative flooding scheme,two decentralized opportunistic cooperative forwarding mechanisms as well as the design of Routing Enabled Cooperative Medium Access Control (RECOMAC) protocol that spans and incorporates the physical, medium access control (MAC) and routing layers for improving the performance of multihop communication. The proposed architecture exploits randomized coding at the physical layer to realize cooperative diversity. Randomized coding alleviates relay selection and actuation mechanisms,and therefore reduces the coordination among the relays. The coded packets are forwarded via opportunistically formed cooperative sets within a region, without communication among the relays and without establishing a prior route. In our architecture, routing layer functionality is submerged into the MAC layer to provide seamless cooperative communication while the messaging overhead to set up routes, select and actuate relays is minimized. RECOMAC is shown to provide dramatic performance improvements, such as eight times higher throughput and ten times lower end-to-end delay as well as reduced overhead, as compared to networks based on well-known IEEE 802.11 and Ad hoc On Demand Distance Vector (AODV) protocols

Reliable multi-hop routing with cooperative transmissions in energy-constrained networks

We present a novel approach in characterizing the optimal reliable multi-hop virtual multiple-input single-output (vMISO) routing in ad hoc networks. Under a high node density regime, we determine the optimal cardinality of the cooperation sets at each hop on a path minimizing the total energy cost per transmitted bit. Optimal cooperating set cardinality curves are derived, and they can be used to determine the optimal routing strategy based on the required reliability, transmission power, and path loss coefficient. We design a new greedy geographical routing algorithm suitable for vMISO transmissions, and demonstrate the applicability of our results for more general networks

Power Optimisation and Relay Selection in Cooperative Wireless Communication Networks

Cooperative communications have emerged as a significant concept to improve reliability and throughput in wireless systems. In cooperative networks, the idea is to implement a scheme in wireless systems where the nodes can harmonize their resources thereby enhancing the network performance in different aspects such as latency, BER and throughput. As cooperation spans from the basic idea of transmit diversity achieved via MIMO techniques and the relay channel, it aims to reap somewhat multiple benefits of combating fading/burst errors, increasing throughput and reducing energy use. Another major benefit of cooperation in wireless networks is that since the concept only requires neighbouring nodes to act as virtual relay antennas, the concept evades the negative impacts of deployment costs of multiple physical antennas for network operators especially in areas where they are difficult to deploy. In cooperative communications energy efficiency and long network lifetimes are very important design issues, the focus in this work is on ad hoc and sensor network varieties where the nodes integrate sensing, processing and communication such that their cooperation capabilities are subject to power optimisation. As cooperation communications leads to trade-offs in Quality of Services and transmit power, the key design issue is power optimisation to dynamically combat channel fluctuations and achieve a net reduction of transmit power with the goal of saving battery life. Recent researches in cooperative communications focus on power optimisation achieved via power control at the PHY layer, and/or scheduling mechanism at the MAC layer. The approach for this work will be to review the power control strategy at the PHY layer, identify their associated trade-offs, and use this as a basis to propose a power control strategy that offers adaptability to channel conditions, the road to novelty in this work is a channel adaptable power control algorithm that jointly optimise power allocation, modulation strategy and relay selection. Thus, a novel relay selection method is developed and implemented to improve the performance of cooperative wireless networks in terms of energy consumption. The relay selection method revolves on selection the node with minimum distance to the source and destination. The design is valid to any wireless network setting especially Ad-hoc and sensor networks where space limitations preclude the implementation of bigger capacity battery. The thesis first investigates the design of relay selection schemes in cooperative networks and the associated protocols. Besides, modulation strategy and error correction code impact on energy consumption are investigated and the optimal solution is proposed and jointly implemented with the relay selection method. The proposed algorithm is extended to cooperative networks in which multiple nodes participate in cooperation in fixed and variable rate system. Thus, multi relay selection algorithm is proposed to improve virtual MIMO performance in terms of energy consumption. Furthermore, motivated by the trend of cell size optimisation in wireless networks, the proposed relay selection method is extended to clustered wireless networks, and jointly implemented with virtual clustering technique. The work will encompass three main stages: First, the cooperative system is designed and two major protocols Decode and Forward (DF) and amplify and forward (AF) are investigated. Second, the proposed algorithm is modelled and tested under different channel conditions with emphasis on its performance using different modulation strategies for different cooperative wireless networks. Finally, the performance of the proposed algorithm is illustrated and verified via computer simulations. Simulation results show that the distance based relay selection algorithm exhibits an improved performance in terms of energy consumption compared to the conventional cooperative schemes under different cooperative communication scenarios

Integrated Data and Energy Communication Network: A Comprehensive Survey

OAPA In order to satisfy the power thirsty of communication devices in the imminent 5G era, wireless charging techniques have attracted much attention both from the academic and industrial communities. Although the inductive coupling and magnetic resonance based charging techniques are indeed capable of supplying energy in a wireless manner, they tend to restrict the freedom of movement. By contrast, RF signals are capable of supplying energy over distances, which are gradually inclining closer to our ultimate goal – charging anytime and anywhere. Furthermore, transmitters capable of emitting RF signals have been widely deployed, such as TV towers, cellular base stations and Wi-Fi access points. This communication infrastructure may indeed be employed also for wireless energy transfer (WET). Therefore, no extra investment in dedicated WET infrastructure is required. However, allowing RF signal based WET may impair the wireless information transfer (WIT) operating in the same spectrum. Hence, it is crucial to coordinate and balance WET and WIT for simultaneous wireless information and power transfer (SWIPT), which evolves to Integrated Data and Energy communication Networks (IDENs). To this end, a ubiquitous IDEN architecture is introduced by summarising its natural heterogeneity and by synthesising a diverse range of integrated WET and WIT scenarios. Then the inherent relationship between WET and WIT is revealed from an information theoretical perspective, which is followed by the critical appraisal of the hardware enabling techniques extracting energy from RF signals. Furthermore, the transceiver design, resource allocation and user scheduling as well as networking aspects are elaborated on. In a nutshell, this treatise can be used as a handbook for researchers and engineers, who are interested in enriching their knowledge base of IDENs and in putting this vision into practice

Energy-efficient multihop cooperative MISO transmission with optimal hop distance in wireless ad hoc networks

In this paper, we investigate the hop distance optimization problem in ad hoc networks where cooperative multiinput- single-output (MISO) is adopted to improve the energy efficiency of the network. We first establish the energy model of multihop cooperative MISO transmission. Based on the model, the energy consumption per bit of the network with high node density is minimized numerically by finding an optimal hop distance, and, to get the global minimum energy consumption, both hop distance and the number of cooperating nodes around each relay node for multihop transmission are jointly optimized. We also compare the performance between multihop cooperative MISO transmission and single-input-single-output (SISO) transmission, under the same network condition (high node density). We show that cooperative MISO transmission could be energyinefficient compared with SISO transmission when the path-loss exponent becomes high. We then extend our investigation to the networks with varied node densities and show the effectiveness of the joint optimization method in this scenario using simulation results. It is shown that the optimal results depend on network conditions such as node density and path-loss exponent, and the simulation results are closely matched to those obtained using the numerical models for high node density cases

Distributed MIMO for wireless sensor networks

Over the past decade, wireless sensor networks have gained more research attention for their potential applications in healthcare, defense, environmental monitoring, etc. Due to the strict energy limitation in the sensor node, techniques used for energy saving are necessary for this kind of network. MIMO technology is proven to be an effective method of increasing the channel capacity and supporting higher data rate under a fixed power budget and bit-error-rate requirement. So, wireless sensor networks and MIMO technology are combined and investigated in this thesis. The key contributions of this thesis are detailed below. Firstly, the extended total energy consumption equations for different transmission modes in cluster-based wireless sensor networks are derived. The transmitting energy consumption and the circuit energy consumption are taken into account in both intra-cluster and inter-cluster phases respectively. Secondly, a resource allocation framework is proposed for cluster-based cooperative MIMO on consideration of circuit energy. By introducing two adjusting parameters for the transmitting energy and the time slot allocation between intra-cluster and inter-cluster phases, this framework is designed to achieve the maximum data throughput of the whole system whilst maintaining the capacity and outage probability requirement in these two phases respectively. Thirdly, on comparison of various transmission modes in wireless sensor networks, a relatively energy-efficient mode switching framework is proposed for both single-hop and multi-hop transmissions. Based on the destination and the neighboring nodes’ path-loss, the source node can decide which transmission mode, SISO or cooperative MISO, single-hop or multi-hop, should be chosen. Conditions for each mode switching are investigated. The possible existing area of the cooperative nodes and the relaying nodes can be obtained from this framework

Applications of Repeated Games in Wireless Networks: A Survey

A repeated game is an effective tool to model interactions and conflicts for players aiming to achieve their objectives in a long-term basis. Contrary to static noncooperative games that model an interaction among players in only one period, in repeated games, interactions of players repeat for multiple periods; and thus the players become aware of other players' past behaviors and their future benefits, and will adapt their behavior accordingly. In wireless networks, conflicts among wireless nodes can lead to selfish behaviors, resulting in poor network performances and detrimental individual payoffs. In this paper, we survey the applications of repeated games in different wireless networks. The main goal is to demonstrate the use of repeated games to encourage wireless nodes to cooperate, thereby improving network performances and avoiding network disruption due to selfish behaviors. Furthermore, various problems in wireless networks and variations of repeated game models together with the corresponding solutions are discussed in this survey. Finally, we outline some open issues and future research directions.Comment: 32 pages, 15 figures, 5 tables, 168 reference

On energy efficiency of routing with cooperative transmissions

Cooperative transmissions emulating multi-antenna systems may help reduce the total energy consumption in wireless networks. In this thesis, we define a virtual multiple-input single-output (vMISO) link to be established when a group of nodes (transmitters) jointly enable space-time communications with a single receiver. There has been plethora of research investigating physical layer issues of such systems; however, higher layer protocols that exploit vMISO links in ad hoc networks are still emerging. We present a novel approach in characterizing the optimal multi-hop vMISO routing in ad hoc networks. The key advantages of vMISO links that we exploit are the increase in transmission range and the decrease in the required transmission energy due to diversity gain. Specifically, under a high node density regime, we solve a nonlinear program that minimizes the total energy cost of reliable end-to-end transmissions by selecting the optimal cooperation set and the location of the next relay node at each hop. We characterize the optimal solution with respect to the reliability of the links, and for different fixed node transmission powers. Our results indicate that a multi-hop vMISO system is energy efficient only when a few nodes cooperate at each hop. We design a new greedy geographical vMISO routing protocol that is also suitable for sparse networks using the results determined under high node density regime. Also, we consider the network lifetime maximization problem in networks employing vMISO links. We formulated the network lifetime maximization with vMISO routing as a nonlinear program. Then, we presented a novel cooperation set selection and flow augmentation based routing heuristic that can significantly increase the network lifetime compared to Single-Input Single-Output (SISO) systems