Low-Complexity Joint Channel Estimation and List Decoding of Short Codes

A pilot-assisted transmission (PAT) scheme is proposed for short blocklengths, where the pilots are used only to derive an initial channel estimate for the list construction step. The final decision of the message is obtained by applying a non-coherent decoding metric to the codewords composing the list. This allows one to use very few pilots, thus reducing the channel estimation overhead. The method is applied to an ordered statistics decoder for communication over a Rayleigh block-fading channel. Gains of up to $1.2$ dB as compared to traditional PAT schemes are demonstrated for short codes with QPSK signaling. The approach can be generalized to other list decoders, e.g., to list decoding of polar codes.Comment: Accepted at the 12th International ITG Conference on Systems, Communications and Coding (SCC 2019), Rostock, German

List Decoding of Short Codes for Communication over Unknown Fading Channels

In this paper, the advantages of list decoding for short packet transmission over fading channels with an unknown state are illustrated. The principle is applied to polar codes (under successive cancellation list decoding) and to general short binary linear block codes (under ordered-statistics decoding). The proposed decoders assume neither a-priori knowledge of the channel coefficients, nor of their statistics. The scheme relies on short pilot fields that are used only to derive an initial channel estimate. The channel estimate is required to be accurate enough to enable a good list construction, i.e., the construction of a list that contains, with high probability, the transmitted codeword. The final decision on the message is obtained by applying a list. This allows one to use very few pilots, thus reducing the the Rayleigh block-fading channel and compared to finite-length performance bounds. The proposed technique provides (in the short block length regime) gains of 1 dB with respect to a traditional pilot-aided transmission scheme

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Channel Detection and Decoding With Deep Learning

In this thesis, we investigate the designs of pragmatic data detectors and channel decoders with the assistance of deep learning. We focus on three emerging and fundamental research problems, including the designs of message passing algorithms for data detection in faster-than-Nyquist (FTN) signalling, soft-decision decoding algorithms for high-density parity-check codes and user identification for massive machine-type communications (mMTC). These wireless communication research problems are addressed by the employment of deep learning and an outline of the main contributions are given below. In the first part, we study a deep learning-assisted sum-product detection algorithm for FTN signalling. The proposed data detection algorithm works on a modified factor graph which concatenates a neural network function node to the variable nodes of the conventional FTN factor graph to compensate any detrimental effects that degrade the detection performance. By investigating the maximum-likelihood bit-error rate performance of a finite length coded FTN system, we show that the error performance of the proposed algorithm approaches the maximum a posterior performance, which might not be approachable by employing the sum-product algorithm on conventional FTN factor graph. After investigating the deep learning-assisted message passing algorithm for data detection, we move to the design of an efficient channel decoder. Specifically, we propose a node-classified redundant decoding algorithm based on the received sequence’s channel reliability for Bose-Chaudhuri-Hocquenghem (BCH) codes. Two preprocessing steps are proposed prior to decoding, to mitigate the unreliable information propagation and to improve the decoding performance. On top of the preprocessing, we propose a list decoding algorithm to augment the decoder’s performance. Moreover, we show that the node-classified redundant decoding algorithm can be transformed into a neural network framework, where multiplicative tuneable weights are attached to the decoding messages to optimise the decoding performance. We show that the node-classified redundant decoding algorithm provides a performance gain compared to the random redundant decoding algorithm. Additional decoding performance gain can be obtained by both the list decoding method and the neural network “learned” node-classified redundant decoding algorithm. Finally, we consider one of the practical services provided by the fifth-generation (5G) wireless communication networks, mMTC. Two separate system models for mMTC are studied. The first model assumes that low-resolution digital-to-analog converters are equipped by the devices in mMTC. The second model assumes that the devices' activities are correlated. In the first system model, two rounds of signal recoveries are performed. A neural network is employed to identify a suspicious device which is most likely to be falsely alarmed during the first round of signal recovery. The suspicious device is enforced to be inactive in the second round of signal recovery. The proposed scheme can effectively combat the interference caused by the suspicious device and thus improve the user identification performance. In the second system model, two deep learning-assisted algorithms are proposed to exploit the user activity correlation to facilitate channel estimation and user identification. We propose a deep learning modified orthogonal approximate message passing algorithm to exploit the correlation structure among devices. In addition, we propose a neural network framework that is dedicated for the user identification. More specifically, the neural network aims to minimise the missed detection probability under a pre-determined false alarm probability. The proposed algorithms substantially reduce the mean squared error between the estimate and unknown sequence, and largely improve the trade-off between the missed detection probability and the false alarm probability compared to the conventional orthogonal approximate message passing algorithm. All the aforementioned three parts of research works demonstrate that deep learning is a powerful technology in the physical layer designs of wireless communications

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors