52,252 research outputs found
Control Strategies for Open-End Winding Drives Operating in the Flux-Weakening Region
This paper presents and compares control strategies for three-phase open-end winding drives operating in the flux-weakening region. A six-leg inverter with a single dc-link is associated with the machine in order to use a single energy source. With this topology, the zero-sequence circuit has to be considered since the zero-sequence current can circulate in the windings. Therefore, conventional over-modulation strategies are not appropriate when the machine enters in the flux-weakening region. A few solutions dealing with the zero-sequence circuit have been proposed in literature. They use a modified space vector modulation or a conventional modulation with additional voltage limitations. The paper describes the aforementioned strategies and then a new strategy is proposed. This new strategy takes into account the magnitudes and phase angles of the voltage harmonic components. This yields better voltage utilization in the dq frame. Furthermore, inverter saturation is avoided in the zero-sequence frame and therefore zero-sequence current control is maintained. Three methods are implemented on a test bed composed of a three-phase permanent-magnet synchronous machine, a six-leg inverter and a hybrid DSP/FPGA controller. Experimental results are presented and compared for all strategies. A performance analysis is conducted as regards the region of operation and the machine parameters.Projet SOFRACI/FU
Closed-loop focal plane wavefront control with the SCExAO instrument
This article describes the implementation of a focal plane based wavefront
control loop on the high-contrast imaging instrument SCExAO (Subaru
Coronagraphic Extreme Adaptive Optics). The sensor relies on the Fourier
analysis of conventional focal-plane images acquired after an asymmetric mask
is introduced in the pupil of the instrument. This absolute sensor is used here
in a closed-loop to compensate the non-common path errors that normally affects
any imaging system relying on an upstream adaptive optics system.This specific
implementation was used to control low order modes corresponding to eight
zernike modes (from focus to spherical). This loop was successfully run on-sky
at the Subaru Telescope and is used to offset the SCExAO deformable mirror
shape used as a zero-point by the high-order wavefront sensor. The paper
precises the range of errors this wavefront sensing approach can operate within
and explores the impact of saturation of the data and how it can be bypassed,
at a cost in performance. Beyond this application, because of its low hardware
impact, APF-WFS can easily be ported in a wide variety of wavefront sensing
contexts, for ground- as well space-borne telescopes, and for telescope pupils
that can be continuous, segmented or even sparse. The technique is powerful
because it measures the wavefront where it really matters, at the level of the
science detector.Comment: 9 pages, 14 figures, accepted for publication by A&
Multilevel Converters: An Enabling Technology for High-Power Applications
| Multilevel converters are considered today as the
state-of-the-art power-conversion systems for high-power and
power-quality demanding applications. This paper presents a
tutorial on this technology, covering the operating principle and
the different power circuit topologies, modulation methods,
technical issues and industry applications. Special attention is
given to established technology already found in industry with
more in-depth and self-contained information, while recent
advances and state-of-the-art contributions are addressed with
useful references. This paper serves as an introduction to the
subject for the not-familiarized reader, as well as an update or
reference for academics and practicing engineers working in
the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Deep Learning for Frame Error Probability Prediction in BICM-OFDM Systems
In the context of wireless communications, we propose a deep learning
approach to learn the mapping from the instantaneous state of a frequency
selective fading channel to the corresponding frame error probability (FEP) for
an arbitrary set of transmission parameters. We propose an abstract model of a
bit interleaved coded modulation (BICM) orthogonal frequency division
multiplexing (OFDM) link chain and show that the maximum likelihood (ML)
estimator of the model parameters estimates the true FEP distribution. Further,
we exploit deep neural networks as a general purpose tool to implement our
model and propose a training scheme for which, even while training with the
binary frame error events (i.e., ACKs / NACKs), the network outputs converge to
the FEP conditioned on the input channel state. We provide simulation results
that demonstrate gains in the FEP prediction accuracy with our approach as
compared to the traditional effective exponential SIR metric (EESM) approach
for a range of channel code rates, and show that these gains can be exploited
to increase the link throughput.Comment: Submitted to 2018 IEEE International Conference on Acoustics, Speech
and Signal Processin
Beamforming in MISO Systems: Empirical Results and EVM-based Analysis
We present an analytical, simulation, and experimental-based study of
beamforming Multiple Input Single Output (MISO) systems. We analyze the
performance of beamforming MISO systems taking into account implementation
complexity and effects of imperfect channel estimate, delayed feedback, real
Radio Frequency (RF) hardware, and imperfect timing synchronization. Our
results show that efficient implementation of codebook-based beamforming MISO
systems with good performance is feasible in the presence of channel and
implementation-induced imperfections. As part of our study we develop a
framework for Average Error Vector Magnitude Squared (AEVMS)-based analysis of
beamforming MISO systems which facilitates comparison of analytical,
simulation, and experimental results on the same scale. In addition, AEVMS
allows fair comparison of experimental results obtained from different wireless
testbeds. We derive novel expressions for the AEVMS of beamforming MISO systems
and show how the AEVMS relates to important system characteristics like the
diversity gain, coding gain, and error floor.Comment: Submitted to IEEE Transactions on Wireless Communications, November
200
- …