Analysis of subthreshold swing in junctionless double gate MOSFET using stacked high-k gate oxide

In this paper, the subthreshold swing was observed when the stacked high-k gate oxide was used for a junctionless double gate (JLDG) MOSFET. For this purpose, a subthreshold swing model was presented using the series-type potential model derived from the Poisson equation. The results of the model presented in this paper were in good agreement with the two-dimensional numerical values and those from other papers. Using this model, the variation of the subthreshold swing for the channel length, silicon thickness, gate oxide thickness, and dielectric constant of the stacked high-k material was observed using the dielectric constant as a parameter. As a result, the subthreshold swing was reduced when the high-k materials were used as the stacked gate oxide film. In the case of the asymmetric structure, the subthreshold swing can be reduced than that of the symmetric JLDG MOSFET when the dielectric constant of the bottom stacked oxide film was greater than that of the top stacked oxide film. In the case of the asymmetric structure, the subthreshold swing could be also reduced by applying the bottom gate voltage lower than the top gate voltage

Subthreshold swing model using scale length for sub-10 nm junction-based double-gate MOSFETs

We propose an analytical model for subthreshold swing using scale length for sub-10 nm double gate (DG) MOSFETs. When the order of the calculation for the series type potential distribution is increased it is possible to obtain accuracy, but there is a problem that the calculation becomes large. Using only the first order calculation of potential distribution, we derive the scale length λ1 and use it to obtain an analytical model of subthreshold swing. The findings show this subthreshold swing model is in concordance with a 2D simulation. The relationship between the channel length and silicon thickness, which can analyze the subthreshold swing using λ1, is derived by the relationship between the scale length and the geometric mean of the silicon and oxide thickness. If the silicon thickness and oxide film thickness satisfy the condition of (Lg-0.215)/6.38 > tsi(=tox), it is found that the result of this model agrees with the results using higher order calculations, within a 4% error range

Relationship of drain induced barrier lowering and top/bottom gate oxide thickness in asymmetric junctionless double gate MOSFET

The relationship of drain induced barrier lowering (DIBL) phenomenon and channel length, silicon thickness, and thicknesses of top and bottom gate oxide films is derived for asymmetric junctionless double gate (JLDG) MOSFETs. The characteristics between the drain current and the gate voltage is derived by using the potential distribution model to propose in this paper. In this case, the threshold voltage is defined as the corresponding gate voltage when the drain current is (W/L) × 10-7 A, and the DIBL representing the change in the threshold voltage with respect to the drain voltage is obtained. As a result, we observe the DIBL is proportional to the negative third power of the channel length and the second power of the silicon thickness and linearly proportional to the geometric mean of the top and bottom gate oxide thicknesses, and derive a relation such as DIBL =25.15ηL_g^(-3) t_si^2 √(t_ox1∙t_ox2 ), where η is a static feedback coefficients between 0 and 1. The η is found to be between 0.5 and 1.0 in this model. The DIBL model of this paper has been observed to be in good agreement with the result of other paper, so it can be used in circuit simulation such as SPICE

Simulation of FinFET Structures

The intensive downscaling of MOS transistors has been the major driving force behind the aggressive increases in transistor density and performance, leading to more chip functionality at higher speeds. While on the other side the reduction in MOSFET dimensions leads to the close proximity between source and drain, which in turn reduces the ability of the gate electrode to control the potential distribution and current flow in the channel region and also results in some undesirable effects called the short-channel effects. These limitations associated with downscaling of MOSFET device geometries have lead device designers and researchers to number of innovative techniques which include the use of different device structures, different channel materials, different gate-oxide materials, different processes such as shallow trench isolation, source/drain silicidation, lightly doped extensions etc. to enable controlled device scaling to smaller dimensions. A lot of research and development works have been done in these and related fields and more remains to be carried out in order to exploit these devices for the wider applications

Design and analytical performance of subthreshold characteristics of CSDG MOSFET.

Masters Degree. University of KwaZulu-Natal, Durban.The downscaling of the Metal-Oxide-Semiconductor Field Effect Transistors (MOSFET) devices have been the driving force for Nanotechnology and Very Large-Scale Integration (VLSI) systems. This is affirmed by Moore’s law which states that “The number of transistors placed in an Integrated Circuit (IC) or chip doubles approximately every two years”. The main objectives for the transistor scaling are: to increase functionality, switching speed, packing density and lower the operating power of the ICs. However, the downscaling of the MOSFET device is posed with various challenges such as the threshold roll-off, Drain Induced Barrier Lowing (DIBL), surface scattering, and velocity saturation known as Short Channel Effects (SCEs). To overcome these challenges, a cylindrically structured MOSFET is employed because it increases the switching speed, current flow, packing density, and provides better immunity to SCEs. This thesis proposes a Cylindrical Surrounding Double-Gate (CSDG) MOSFET which is an extended version of Double-Gate (DG) MOSFET and Cylindrical Surrounding-Gate (CSG) MOSFET in terms of form factor and current drive respectively. Furthermore, employing the Evanescent-Mode analysis (EMA) of a two-dimensional (2D) Poisson solution, the performance analysis of the novel CSDG MOSFET is presented. The channel length, radii Silicon film difference, and the oxide thickness are investigated for the CSDG MOSFET at the subthreshold regime. Using the minimum channel potential expression obtained by EMA, the threshold voltage and the subthreshold swing model of the proposed CSDG MOSFET are evaluated and discussed. The device performance is verified with various values of radii Silicon film difference and gate oxide thickness Finally, the low operating power and switching characteristics of the proposed CSDG MOSFET has been employed to design a simple CSDG bridge rectifier circuit for micropower electricity (energy harvester). Similar to the traditional MOSFETs, the switching process of CSDG MOSFET is in two operating modes: switch-ON (conduction of current between the drain and source) or switched-OFF (no conduction of current). However, unlike the traditional diode bridge rectifier which utilizes four diodes for its operation, the CSDG bridge rectifier circuits employs only two CSDGs (n-channel and p- channel) for its operation. This optimizes cost and improves efficiency. Finally, the results from the analyses demonstrate that the proposed CSDG MOSFET is a promising device for nanotechnology and self-micro powered device system application

Design Strategies for Ultralow Power 10nm FinFETs

Integrated circuits and microprocessor chips have become integral part of our everyday life to such an extent that it is difficult to imagine a system related to consumer electronics, health care, public transportation, household application without these small components. The heart of these circuits is, the metal oxide field-effect transistor (MOSFET) which is used as a switch. The dimensions of these transistors have been scaled from a few micrometers to few tens of nanometer to achieve higher performance, lower power consumption and low cost of production. According to the International Technology Roadmap for Semiconductors (ITRS), beyond 32 nm technology node, planer devices will not be able to fulfill the strict leakage requirement anymore due to overpowering short channel effects and need of multi-gate transistor is inevitable. The motivation of the thesis therefore is to investigate techniques to engineer threshold voltage of a tri-gate FinFET for low power and ultra-low power applications. The complexity of physics involved in 3D nano- devices encourages use of advanced simulation tools. Thus, Technology Computer Aided Design Tools (TCAD) are needed to perform device optimization and support device and process integration engineers. Below 20nm technology node, the Fin-shaped Field Effect Transistor or Tri-gate transistor requires extensive use of 3D TCAD simulations. The multi-gate devices such as FinFETs are considered to be one of the most promising devices for Ultra Large Scale Integration (ULSI). This device structural design with additional gate electrodes and channel surfaces offers dynamic threshold voltage control. In addition, it can provide better short channel performance and reduced leakage. In this study, new design strategies for 10nm node NMOS bulk FinFET transistors are investigated to meet low power (LP) (50pA/μ

Analysis of on-off current ratio in asymmetrical junctionless double gate MOSFET using high-k dielectric materials

The variation of the on-off current ratio is investigated when the asymmetrical junctionless double gate MOSFET is fabricated as a SiO2/high-k dielectric stacked gate oxide. The high dielectric materials have the advantage of reducing the short channel effect, but the rise of gate parasitic current due to the reduction of the band offset and the poor interface property with silicon has become a problem. To overcome this disadvantage, a stacked oxide film is used. The potential distributions are obtained from the Poission equation, and the threshold voltage is calculated from the second derivative method to obtain the on-current. As a result, this model agrees with the results from other papers. The on-off current ratio is in proportion to the arithmetic average of the upper and lower high dielectric material thicknesses. The on-off current ratio of 104 or less is shown for SiO2, but the on-off current ratio for TiO2 (k=80) increases to 107 or more

Studies of short channel effects and Performance enhancement of nano-mosfet Based on multi-objective genetic algorithm Approach

The nano-scale devices face a major issue i.e Short Channel Effects, as a result of which the performance of the devices degrade. To enhance the performance of such devices, the SCEs should be reduced. This thesis contributes to enhance the performance of nano-scaled DG MOSFET by re-ducing the short channel effects. To approach towards the main objective of the thesis, a study has been done on analytical modeling of undoped symmetric DG MOSFET. Then, to get the picture of SCEs, the electrical parameters such as maximum Drain current(Ion),Leakage current(Ioff ), Sub threshold Swing (SS), Threshold voltage (Vth ), and Drain In-duced Barrier Lowering (DIBL) are analytically derived by solving 2-dimensional Poisson’s equation and the same are studied with the variation of design parameters such as L, tsi and tox. To validate such analytical models, SCEs are studied using ATLAS device simulator. Graded Cannel engineering techniques are used for reduction of SCEs. For further reduction or minimization of SCEs, a multi-objective optimization technique is used to enhance the accuracy with optimum design parameters. To validate the optimized structure, a simulated model is built with those optimized values of the design parameter and the performance of the device is compared with the existing result [32]

Analytical modeling of Gate All Around (GAA) MOSFET in nanoscale.

The nano-scale devices face a major issue i.e. Short Channel Effects, as a result of which the performance of the devices degrade. To enhance the performance of such devices, the SCEs should be reduced. This Thesis contributes to enhance the performance of nano-scaled Quadruple gate MOSFET by reducing the SCEs effects. In this work, an accurate analytical sub threshold models has been developed for an Undoped double gate MOSFET considering parabolic approximation of the channel. The Centre (axial) as well as the surface potential model is obtained by solving the 2-D Poisson’s equation. Using two 2-D double gate MOSFETs and then using perimeter weighted sum method the center potential model of the Quadruple gate MOSFET has been developed. The developed Centre potential model is used further to develop the threshold voltage model. The Centre potential model was further applied to estimate the sub threshold drain current and the sub threshold swing of the device. An extensive analysis of the device parameters like the channel thickness, channel width, oxide thickness, channel length etc. on the sub threshold electrical parameters is demonstrated. This gives a highly accurate model which closely matches with the simulations. The models are verified by the simulations obtained from 3-D numerical device simulator Sentaurus from Synopsys

Modeling and Simulation of Negative Capacitance MOSFETs

The current and voltage characteristics of a MOSFET device are maily characterized by the source to channel barrier which is controlled by the gate voltage. The Boltazmann statistics which govern the number of carriers that are able to cross the barrier indicates that to increase the current by a decade, atleast 60 mV of rise in gate voltage is required. As a result of this limitation, the threshold voltage of modern MOSFETs cannot be less than about 0.3 V for an ION to IOFF ratio of 5 decades. This has put a fundamental bottleneck in voltage downscaling increasing the power consumption in modern IC based chips with billions of transistors. Sayeef Salahuddin and Supriyo Dutta proposed the idea of including ferroelectric in MOSFET gate stack which allows an internal voltage ampli�cation at the MOSFET channel which can be used to achieve a smaller subthreshold swing which would further reduce the power consumption of the devices. In this thesis we have undertaken a simulation based study of such devices to study how the inclusion of negative capacitance ferroelectrics leads changes in various device characteristics. Initially we have taken a compact modeling based approach to study device characteristics in latest industry standard FinFET devices. For this purpose we have used the BSIM-CMG Verilog A model and modi�ed the model appropriately to include the e�ect of negative capacitance ferroelectric in the gate stack. This simulation allowed us to observe that negative capacitance (NC) devices can indeed give a subthreshold swing lesser than 60 mV/dec. Further other interesting properties like negative output resistance and drain induced barrier rising are observed. Using the compact models developed above, we have analyzed some simple circuits with NC devices. Initially an inverter shows a hysteresis in the transfer characteristics. This can be attributed to negative di�erential resistance. Ring oscillator analysis shows that RO frequency for NC devices is lesser than that of regular devices due to enhanced gate capacitance and slower response of ferroelectrics. Scaling analysis has been performed to see the performance of NC devices in future technologies. For this we used TCAD analysis coupled with Landau Khalatnikov equation. This analysis shows that NC devices are more e�ective in suppressing short channel e�ects like DIBL and can hence be used for further downscaling of the devices. Finally we develop models to take into account the multidomain Landau equations for ferroelec- tric into account. We have performed such an analysis for a ferroelectric resistor series network. A similar analysis is performed for short channel double gate MOSFET without inter layer metal be- tween ferroelectric and the internal MOS device. This analysis showed that coupling factor between ferroelectric domains plays an important role in the device characteristics