3,687 research outputs found
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
Analog MIMO Radio-over-Copper: Prototype and Preliminary Experimental Results
Analog Multiple-Input Multiple-Output Radio-over-Copper (A-MIMO-RoC) is an
effective all-analog FrontHaul (FH) architecture that exploits any pre-existing
Local Area Network (LAN) cabling infrastructure of buildings to distribute
Radio-Frequency (RF) signals indoors. A-MIMO-RoC, by leveraging a fully analog
implementation, completely avoids any dedicated digital interface by using a
transparent end-to-end system, with consequent latency, bandwidth and cost
benefits. Usually, LAN cables are exploited mainly in the low-frequency
spectrum portion, mostly due to the moderate cable attenuation and crosstalk
among twisted-pairs. Unlike current systems based on LAN cables, the key
feature of the proposed platform is to exploit more efficiently the huge
bandwidth capability offered by LAN cables, that contain 4 twisted-pairs
reaching up to 500 MHz bandwidth/pair when the length is below 100 m. Several
works proposed numerical simulations that assert the feasibility of employing
LAN cables for indoor FH applications up to several hundreds of MHz, but an
A-MIMO-RoC experimental evaluation is still missing. Here, we present some
preliminary results obtained with an A-MIMO-RoC prototype made by low-cost
all-analog/all-passive devices along the signal path. This setup demonstrates
experimentally the feasibility of the proposed analog relaying of MIMO RF
signals over LAN cables up to 400 MHz, thus enabling an efficient exploitation
of the LAN cables transport capabilities for 5G indoor applications.Comment: Part of this work has been accepted as a conference publication to
ISWCS 201
CogCell: Cognitive Interplay between 60GHz Picocells and 2.4/5GHz Hotspots in the 5G Era
Rapid proliferation of wireless communication devices and the emergence of a
variety of new applications have triggered investigations into next-generation
mobile broadband systems, i.e., 5G. Legacy 2G--4G systems covering large areas
were envisioned to serve both indoor and outdoor environments. However, in the
5G-era, 80\% of overall traffic is expected to be generated in indoors. Hence,
the current approach of macro-cell mobile network, where there is no
differentiation between indoors and outdoors, needs to be reconsidered. We
envision 60\,GHz mmWave picocell architecture to support high-speed indoor and
hotspot communications. We envisage the 5G indoor network as a combination of-,
and interplay between, 2.4/5\,GHz having robust coverage and 60\,GHz links
offering high datarate. This requires an intelligent coordination and
cooperation. We propose 60\,GHz picocellular network architecture, called
CogCell, leveraging the ubiquitous WiFi. We propose to use 60\,GHz for the data
plane and 2.4/5GHz for the control plane. The hybrid network architecture
considers an opportunistic fall-back to 2.4/5\,GHz in case of poor connectivity
in the 60\,GHz domain. Further, to avoid the frequent re-beamforming in 60\,GHz
directional links due to mobility, we propose a cognitive module -- a
sensor-assisted intelligent beam switching procedure -- which reduces the
communication overhead. We believe that the CogCell concept will help future
indoor communications and possibly outdoor hotspots, where mobile stations and
access points collaborate with each other to improve the user experience.Comment: 14 PAGES in IEEE Communications Magazine, Special issue on Emerging
Applications, Services and Engineering for Cognitive Cellular Systems
(EASE4CCS), July 201
Wearable Communications in 5G: Challenges and Enabling Technologies
As wearable devices become more ingrained in our daily lives, traditional
communication networks primarily designed for human being-oriented applications
are facing tremendous challenges. The upcoming 5G wireless system aims to
support unprecedented high capacity, low latency, and massive connectivity. In
this article, we evaluate key challenges in wearable communications. A
cloud/edge communication architecture that integrates the cloud radio access
network, software defined network, device to device communications, and
cloud/edge technologies is presented. Computation offloading enabled by this
multi-layer communications architecture can offload computation-excessive and
latency-stringent applications to nearby devices through device to device
communications or to nearby edge nodes through cellular or other wireless
technologies. Critical issues faced by wearable communications such as short
battery life, limited computing capability, and stringent latency can be
greatly alleviated by this cloud/edge architecture. Together with the presented
architecture, current transmission and networking technologies, including
non-orthogonal multiple access, mobile edge computing, and energy harvesting,
can greatly enhance the performance of wearable communication in terms of
spectral efficiency, energy efficiency, latency, and connectivity.Comment: This work has been accepted by IEEE Vehicular Technology Magazin
- …