887 research outputs found
Review on auto-depth control system for an unmanned underwater remotely operated vehicle (ROV) using intelligent controller
This paper presents a review of auto-depth control
system for an Unmanned Underwater Remotely operated Vehicle
(ROV), focusing on the Artificial Intelligent Controller
Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts
of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth control
Review on Auto-Depth Control System for an Unmanned Underwater Remotely Operated Vehicle (ROV) using Intelligent Controller
This paper presents a review of auto-depth control system for an Unmanned Underwater Remotely operated Vehicle (ROV), focusing on the Artificial Intelligent Controller Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth contro
Review on Auto-Depth Control System for an Unmanned Underwater Remotely Operated Vehicle (ROV) using Intelligent Controller
This paper presents a review of auto-depth control system for an Unmanned Underwater Remotely operated Vehicle (ROV), focusing on the Artificial Intelligent Controller Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth contro
Intelligent Control Strategies for an Autonomous Underwater Vehicle
The dynamic characteristics of autonomous underwater vehicles (AUVs) present a control
problem that classical methods cannot often accommodate easily. Fundamentally, AUV dynamics
are highly non-linear, and the relative similarity between the linear and angular velocities about
each degree of freedom means that control schemes employed within other flight vehicles are not
always applicable. In such instances, intelligent control strategies offer a more sophisticated
approach to the design of the control algorithm. Neurofuzzy control is one such technique, which
fuses the beneficial properties of neural networks and fuzzy logic in a hybrid control architecture.
Such an approach is highly suited to development of an autopilot for an AUV.
Specifically, the adaptive network-based fuzzy inference system (ANFIS) is discussed in
Chapter 4 as an effective new approach for neurally tuning course-changing fuzzy autopilots.
However, the limitation of this technique is that it cannot be used for developing multivariable
fuzzy structures. Consequently, the co-active ANFIS (CANFIS) architecture is developed and
employed as a novel multi variable AUV autopilot within Chapter 5, whereby simultaneous control
of the AUV yaw and roll channels is achieved. Moreover, this structure is flexible in that it is
extended in Chapter 6 to perform on-line control of the AUV leading to a novel autopilot design
that can accommodate changing vehicle pay loads and environmental disturbances.
Whilst the typical ANFIS and CANFIS structures prove effective for AUV control system
design, the well known properties of radial basis function networks (RBFN) offer a more flexible
controller architecture. Chapter 7 presents a new approach to fuzzy modelling and employs both
ANFIS and CANFIS structures with non-linear consequent functions of composite Gaussian form.
This merger of CANFIS and a RBFN lends itself naturally to tuning with an extended form of the
hybrid learning rule, and provides a very effective approach to intelligent controller development.The Sea Systems and Platform Integration Sector,
Defence Evaluation and Research Agency, Winfrit
Online Interval Type-2 Fuzzy Extreme Learning Machine Applied to 3D Path Following for Remotely Operated Underwater Vehicles
In marine missions that involve 3D path following tasks, the overall goal of Underwater Vehicles (UVs) is the successful completion of a path previously specified by the operator. This implies that the path must be followed by the UV as closely as possible and arrive at a location for collection by a vessel. In this paper, an Online Interval Type-2 Fuzzy Extreme Learning Machine (OIT2-FELM) is suggested to achieve a robust following behaviour along a predefined 3D path using a Remotely Operated Underwater Vehicle (ROV). The proposed machine is a fast sequential learning scheme to the training of a more generalised model of TSK Interval Type-2 Fuzzy Inference Systems (TSK IT2 FISs) equivalent to Single Layer Feedforward Neural Networks (SLFNs). Learning new input data in the OIT2-FELM can be done one-by-one or chunk-by-chunk with a fixed or varying size. The OIT2-FELM is implemented in a hierarchical navigation strategy (HNS) as the main guidance mechanism to infer local control motions and to provide the ROV with the necessary autonomy to complete a predefined 3D path. For local path-planning, the OIT2-FELM performs signal classification for obstacle avoidance and target detection based on data collected by an on-board scan sonar. To evaluate the performance of the proposed OIT2-FELM, two different experiments are suggested. First, a number of benchmark problems in the field of non-linear system identification, regression and classification problems are used. Secondly, a number of experiments to the completion of a predefined 3D path using an ROV is implemented. Compared to other fuzzy strategies, the OIT2-FELM offered two significant capabilities. On the one hand, the OIT2-FELM provides a better treatment of uncertainty and noisy signals in underwater environments while improving the ROV's performance. Secondly, online learning in OIT2-FELM allows continuous knowledge discovery from survey data to infer the surroundings of the ROV. Experiment results to the completion of 3D paths show the effectiveness of the proposed approach to handle uncertainty and produce reasonable classification predictions (∼90.5% accuracy in testing data).</p
Development of Robust Control Strategies for Autonomous Underwater Vehicles
The resources of the energy and chemical balance in the ocean sustain mankind in many ways. Therefore, ocean exploration is an essential task that is accomplished by deploying Underwater Vehicles. An Underwater Vehicle with autonomy feature for its navigation and control is called
Autonomous Underwater Vehicle (AUV). Among the task handled by an AUV, accurately positioning itself at a desired position with respect to the reference objects is called set-point control. Similarly, tracking of the reference trajectory is also another important task. Battery recharging of AUV, positioning with respect to underwater structure, cable, seabed, tracking of reference trajectory with desired accuracy and speed to avoid collision with the guiding vehicle in the last phase of docking are some significant applications where an AUV needs to perform
the above tasks. Parametric uncertainties in AUV dynamics and actuator torque limitation necessitate to design robust control algorithms to achieve motion control objectives in the face of uncertainties. Sliding Mode Controller (SMC), H / μ synthesis, model based PID group controllers are some of the robust controllers which have been applied to AUV. But SMC suffers from less efficient tuning of its switching gains due to model parameters and noisy estimated acceleration states appearing in its control law. In addition, demand of high control effort due to high frequency chattering is another drawback of SMC. Furthermore, real-time implementation of H / μ synthesis controller based on its stability study is restricted due to use of linearly approximated dynamic model of an AUV, which hinders achieving robustness. Moreover, model based PID group controllers suffer from implementation complexities and exhibit poor transient and steady-state performances under parametric uncertainties. On the other hand model free
Linear PID (LPID) has inherent problem of narrow convergence region, i.e.it can not ensure convergence of large initial error to zero. Additionally, it suffers from integrator-wind-up and subsequent saturation of actuator during the occurrence of large initial error. But LPID controller
has inherent capability to cope up with the uncertainties. In view of addressing the above said problem, this work proposes wind-up free Nonlinear PID with Bounded Integral (BI) and Bounded Derivative (BD) for set-point control and combination of continuous SMC with Nonlinear PID with BI and BD namely SM-N-PID with BI and BD for trajectory tracking.
Nonlinear functions are used for all P,I and D controllers (for both of set-point and tracking control) in addition to use of nonlinear tan hyperbolic function in SMC(for tracking only) such that torque demand from the controller can be kept within a limit. A direct Lyapunov analysis is pursued to prove stable motion of AUV. The efficacies of the proposed controllers are compared with other two controllers namely PD and N-PID without BI and BD for set-point control and PD plus Feedforward Compensation (FC) and SM-NPID without BI and BD for tracking control.
Multiple AUVs cooperatively performing a mission offers several advantages over a single AUV in a non-cooperative manner; such as reliability and increased work efficiency, etc. Bandwidth limitation in acoustic medium possess challenges in designing cooperative motion control
algorithm for multiple AUVs owing to the necessity of communication of sensors and actuator signals among AUVs. In literature, undirected graph based approach is used for control design under communication constraints and thus it is not suitable for large number of AUVs participating in a cooperative motion plan. Formation control is a popular cooperative motion control paradigm. This thesis models the formation as a minimally persistent directed graph and
proposes control schemes for maintaining the distance constraints during the course of motion of entire formation. For formation control each AUV uses Sliding Mode Nonlinear PID controller with Bounded Integrator and Bounded Derivative. Direct Lyapunov stability analysis in the
framework of input-to-state stability ensures the stable motion of formation while maintaining the desired distance constraints among the AUVs
Pemahaman pelajar tingkatan lima katering terhadap bab kaedah memasak dalam mata pelajaran teknologi katering
Bab Kaedah Memasak merupakan salah satu bab yang penting dalam mata
pelajaran Teknologi Katering. Faktor terpenting adalah memastikan pelajar menguasai
serta memahami konsepnya adalah melalui proses pengajaran dan pembelajaran yang
betul. Tinjauan awal di Sekolah Menengah Teknik yang menawarkan Kursus Katering,
menunjukkan bahawa kebanyakan pelajar sukar untuk menguasai dan memahami bab
tersebut. Berdasarkan hasil tinjauan , pengkaji ingin mengenalpasti pemasalahan dalam
memahami bab tersebut. Di samping itu juga, pengkaji ingin mengenalpasti adakah
pencapaian pelajar dalam PMR, minat, motivasi dan gaya pembelajaran mempengaruhi
pemahaman pelajar, Kajian rintis telah dilakukan terhadap 10 orang responden dengan
nilai alpha 0.91. Ini menunjukkan kebolehpercayaan terhadap kajian di jalankan adalah
tinggi. Responden adalah terdiri daripada 30 orang pelajar Tingkatan Lima (ERT)
Sekolah Menengah Teknik Muar, Johor. Keputusan skor min keseluruhan menunjukkan
pelajar berminat dan mempunyai motivasi ynag baik dalam bidang ini. Namun begitu,
gaya pembelajaran yang diamalkan tidak sesuai dan antara pemyebab wujudnya
pemasalahan dalam memahami bab Kaedah Memasak. Ujian kolerasi menunjukkan
bahawa tidak terdapat sebarang hubungan signifikan antara pencapaian PMR pelajar
dengan pemahaman bab tersebut. Sementara minat, motivasi dan gaya pembelajaran
membuktikan ada hubungan signifikan dengan pemahaman pelajar dalam bab Kaedah
Memasak
Analysis on AUV Heading Control System Based on RS-Chaos-LSSVM
Aimed at the submarine uncertainties and model's impreciseness, an integrated RS-Chaos-LSSVM model is put forward because of nonlinearity and time-variability of AUV heading control system. The LSSVM is a typical nonlinear regression modeling based on small sample. Its parameters are optimized by Chaos algorithm. It is to gain the optimal model and get the higher accurate. By using Rough theory the monitor data attribute of AUV is reduced to eliminate the redundant information to improve efficiency. Taken a certain typed AUV as an example, the two controller compare results .The results show the RS-Chaos-LSSVM controller markedly reduce the time. And the heading error and control rudder are simulated in the ideal and ocean current environment. In the ideal environment the two controllers all have good performances. But in the ocean current environment the simulation results show the integrated controller improve the model's stability and accuracy. The overshoot, the rise and adjust time reduced greatly. In a word the integrated RS-Chaos-LSSVM heading predictive controller has better performances especially strong anti-interfere capability
Review of dynamic positioning control in maritime microgrid systems
For many offshore activities, including offshore oil and gas exploration and offshore wind farm construction, it is essential to keep the position and heading of the vessel stable. The dynamic positioning system is a progressive technology, which is extensively used in shipping and other maritime structures. To maintain the vessels or platforms from displacement, its thrusters are used automatically to control and stabilize the position and heading of vessels in sea state disturbances. The theory of dynamic positioning has been studied and developed in terms of control techniques to achieve greater accuracy and reduce ship movement caused by environmental disturbance for more than 30 years. This paper reviews the control strategies and architecture of the DPS in marine vessels. In addition, it suggests possible control principles and makes a comparison between the advantages and disadvantages of existing literature. Some details for future research on DP control challenges are discussed in this paper
- …