A cross-layer approach for new reliability-performance trade-offs in MLC NAND flash memories

In spite of the mature cell structure, the memory controller architecture of Multi-level cell (MLC) NAND Flash memories is evolving fast in an attempt to improve the uncorrected/miscorrected bit error rate (UBER) and to provide a more flexible usage model where the performance-reliability trade-off point can be adjusted at runtime. However, optimization techniques in the memory controller architecture cannot avoid a strict trade-off between UBER and read throughput. In this paper, we show that co-optimizing ECC architecture configuration in the memory controller with program algorithm selection at the technology layer, a more flexible memory sub-system arises, which is capable of unprecedented trade-offs points between performance and reliability

Proposal of an Adaptive Fault Tolerance Mechanism to Tolerate Intermittent Faults in RAM

[EN] Due to transistor shrinking, intermittent faults are a major concern in current digital systems. This work presents an adaptive fault tolerance mechanism based on error correction codes (ECC), able to modify its behavior when the error conditions change without increasing the redundancy. As a case example, we have designed a mechanism that can detect intermittent faults and swap from an initial generic ECC to a specific ECC capable of tolerating one intermittent fault. We have inserted the mechanism in the memory system of a 32-bit RISC processor and validated it by using VHDL simulation-based fault injection. We have used two (39, 32) codes: a single error correction-double error detection (SEC-DED) and a code developed by our research group, called EPB3932, capable of correcting single errors and double and triple adjacent errors that include a bit previously tagged as error-prone. The results of injecting transient, intermittent, and combinations of intermittent and transient faults show that the proposed mechanism works properly. As an example, the percentage of failures and latent errors is 0% when injecting a triple adjacent fault after an intermittent stuck-at fault. We have synthesized the adaptive fault tolerance mechanism proposed in two types of FPGAs: non-reconfigurable and partially reconfigurable. In both cases, the overhead introduced is affordable in terms of hardware, time and power consumption.This research was supported in part by the Spanish Government, project TIN2016-81,075-R, and by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), project 20190032.Baraza Calvo, JC.; Gracia-Morán, J.; Saiz-Adalid, L.; Gil Tomás, DA.; Gil, P. (2020). Proposal of an Adaptive Fault Tolerance Mechanism to Tolerate Intermittent Faults in RAM. Electronics. 9(12):1-30. https://doi.org/10.3390/electronics9122074S130912International Technology Roadmap for Semiconductors (ITRS)http://www.itrs2.net/2013-itrs.htmlJeng, S.-L., Lu, J.-C., & Wang, K. (2007). A Review of Reliability Research on Nanotechnology. IEEE Transactions on Reliability, 56(3), 401-410. doi:10.1109/tr.2007.903188Ibe, E., Taniguchi, H., Yahagi, Y., Shimbo, K., & Toba, T. (2010). Impact of Scaling on Neutron-Induced Soft Error in SRAMs From a 250 nm to a 22 nm Design Rule. IEEE Transactions on Electron Devices, 57(7), 1527-1538. doi:10.1109/ted.2010.2047907Boussif, A., Ghazel, M., & Basilio, J. C. (2020). Intermittent fault diagnosability of discrete event systems: an overview of automaton-based approaches. Discrete Event Dynamic Systems, 31(1), 59-102. doi:10.1007/s10626-020-00324-yConstantinescu, C. (2003). Trends and challenges in VLSI circuit reliability. IEEE Micro, 23(4), 14-19. doi:10.1109/mm.2003.1225959Bondavalli, A., Chiaradonna, S., Di Giandomenico, F., & Grandoni, F. (2000). Threshold-based mechanisms to discriminate transient from intermittent faults. IEEE Transactions on Computers, 49(3), 230-245. doi:10.1109/12.841127Contant, O., Lafortune, S., & Teneketzis, D. (2004). Diagnosis of Intermittent Faults. Discrete Event Dynamic Systems, 14(2), 171-202. doi:10.1023/b:disc.0000018570.20941.d2Sorensen, B. A., Kelly, G., Sajecki, A., & Sorensen, P. W. (s. f.). An analyzer for detecting intermittent faults in electronic devices. Proceedings of AUTOTESTCON ’94. doi:10.1109/autest.1994.381590Gracia-Moran, J., Gil-Tomas, D., Saiz-Adalid, L. J., Baraza, J. C., & Gil-Vicente, P. J. (2010). Experimental validation of a fault tolerant microcomputer system against intermittent faults. 2010 IEEE/IFIP International Conference on Dependable Systems & Networks (DSN). doi:10.1109/dsn.2010.5544288Fujiwara, E. (2005). Code Design for Dependable Systems. doi:10.1002/0471792748Hamming, R. W. (1950). Error Detecting and Error Correcting Codes. Bell System Technical Journal, 29(2), 147-160. doi:10.1002/j.1538-7305.1950.tb00463.xSaiz-Adalid, L.-J., Gil-Vicente, P.-J., Ruiz-García, J.-C., Gil-Tomás, D., Baraza, J.-C., & Gracia-Morán, J. (2013). Flexible Unequal Error Control Codes with Selectable Error Detection and Correction Levels. Computer Safety, Reliability, and Security, 178-189. doi:10.1007/978-3-642-40793-2_17Frei, R., McWilliam, R., Derrick, B., Purvis, A., Tiwari, A., & Di Marzo Serugendo, G. (2013). Self-healing and self-repairing technologies. The International Journal of Advanced Manufacturing Technology, 69(5-8), 1033-1061. doi:10.1007/s00170-013-5070-2Maiz, J., Hareland, S., Zhang, K., & Armstrong, P. (s. f.). Characterization of multi-bit soft error events in advanced SRAMs. IEEE International Electron Devices Meeting 2003. doi:10.1109/iedm.2003.1269335Schroeder, B., Pinheiro, E., & Weber, W.-D. (2011). DRAM errors in the wild. Communications of the ACM, 54(2), 100-107. doi:10.1145/1897816.1897844BanaiyanMofrad, A., Ebrahimi, M., Oboril, F., Tahoori, M. B., & Dutt, N. (2015). Protecting caches against multi-bit errors using embedded erasure coding. 2015 20th IEEE European Test Symposium (ETS). doi:10.1109/ets.2015.7138735Kim, J., Sullivan, M., Lym, S., & Erez, M. (2016). All-Inclusive ECC: Thorough End-to-End Protection for Reliable Computer Memory. 2016 ACM/IEEE 43rd Annual International Symposium on Computer Architecture (ISCA). doi:10.1109/isca.2016.60Hwang, A. A., Stefanovici, I. A., & Schroeder, B. (2012). Cosmic rays don’t strike twice. ACM SIGPLAN Notices, 47(4), 111-122. doi:10.1145/2248487.2150989Gil-Tomás, D., Gracia-Morán, J., Baraza-Calvo, J.-C., Saiz-Adalid, L.-J., & Gil-Vicente, P.-J. (2012). Studying the effects of intermittent faults on a microcontroller. Microelectronics Reliability, 52(11), 2837-2846. doi:10.1016/j.microrel.2012.06.004Plasma CPU Modelhttps://opencores.org/projects/plasmaArlat, J., Aguera, M., Amat, L., Crouzet, Y., Fabre, J.-C., Laprie, J.-C., … Powell, D. (1990). Fault injection for dependability validation: a methodology and some applications. IEEE Transactions on Software Engineering, 16(2), 166-182. doi:10.1109/32.44380Gil-Tomas, D., Gracia-Moran, J., Baraza-Calvo, J.-C., Saiz-Adalid, L.-J., & Gil-Vicente, P.-J. (2012). Analyzing the Impact of Intermittent Faults on Microprocessors Applying Fault Injection. IEEE Design & Test of Computers, 29(6), 66-73. doi:10.1109/mdt.2011.2179514Rashid, L., Pattabiraman, K., & Gopalakrishnan, S. (2010). Modeling the Propagation of Intermittent Hardware Faults in Programs. 2010 IEEE 16th Pacific Rim International Symposium on Dependable Computing. doi:10.1109/prdc.2010.52Amiri, M., Siddiqui, F. M., Kelly, C., Woods, R., Rafferty, K., & Bardak, B. (2016). FPGA-Based Soft-Core Processors for Image Processing Applications. Journal of Signal Processing Systems, 87(1), 139-156. doi:10.1007/s11265-016-1185-7Hailesellasie, M., Hasan, S. R., & Mohamed, O. A. (2019). MulMapper: Towards an Automated FPGA-Based CNN Processor Generator Based on a Dynamic Design Space Exploration. 2019 IEEE International Symposium on Circuits and Systems (ISCAS). doi:10.1109/iscas.2019.8702589Mittal, S. (2018). A survey of FPGA-based accelerators for convolutional neural networks. Neural Computing and Applications, 32(4), 1109-1139. doi:10.1007/s00521-018-3761-1Intel Completes Acquisition of Alterahttps://newsroom.intel.com/news-releases/intel-completes-acquisition-of-altera/#gs.mi6ujuAMD to Acquire Xilinx, Creating the Industry’s High Performance Computing Leaderhttps://www.amd.com/en/press-releases/2020-10-27-amd-to-acquire-xilinx-creating-the-industry-s-high-performance-computingKim, K. H., & Lawrence, T. F. (s. f.). Adaptive fault tolerance: issues and approaches. [1990] Proceedings. Second IEEE Workshop on Future Trends of Distributed Computing Systems. doi:10.1109/ftdcs.1990.138292Gonzalez, O., Shrikumar, H., Stankovic, J. A., & Ramamritham, K. (s. f.). Adaptive fault tolerance and graceful degradation under dynamic hard real-time scheduling. Proceedings Real-Time Systems Symposium. doi:10.1109/real.1997.641271Jacobs, A., George, A. D., & Cieslewski, G. (2009). Reconfigurable fault tolerance: A framework for environmentally adaptive fault mitigation in space. 2009 International Conference on Field Programmable Logic and Applications. doi:10.1109/fpl.2009.5272313Shin, D., Park, J., Park, J., Paul, S., & Bhunia, S. (2017). Adaptive ECC for Tailored Protection of Nanoscale Memory. IEEE Design & Test, 34(6), 84-93. doi:10.1109/mdat.2016.2615844Silva, F., Muniz, A., Silveira, J., & Marcon, C. (2020). CLC-A: An Adaptive Implementation of the Column Line Code (CLC) ECC. 2020 33rd Symposium on Integrated Circuits and Systems Design (SBCCI). doi:10.1109/sbcci50935.2020.9189901Mukherjee, S. S., Emer, J., Fossum, T., & Reinhardt, S. K. (s. f.). Cache scrubbing in microprocessors: myth or necessity? 10th IEEE Pacific Rim International Symposium on Dependable Computing, 2004. Proceedings. doi:10.1109/prdc.2004.1276550Saleh, A. M., Serrano, J. J., & Patel, J. H. (1990). Reliability of scrubbing recovery-techniques for memory systems. IEEE Transactions on Reliability, 39(1), 114-122. doi:10.1109/24.52622X9SRA User’s Manual (Rev. 1.1)https://www.manualshelf.com/manual/supermicro/x9sra/user-s-manual-1-1.htmlChishti, Z., Alameldeen, A. R., Wilkerson, C., Wu, W., & Lu, S.-L. (2009). Improving cache lifetime reliability at ultra-low voltages. Proceedings of the 42nd Annual IEEE/ACM International Symposium on Microarchitecture - Micro-42. doi:10.1145/1669112.1669126Datta, R., & Touba, N. A. (2011). Designing a fast and adaptive error correction scheme for increasing the lifetime of phase change memories. 29th VLSI Test Symposium. doi:10.1109/vts.2011.5783773Kim, J., Lim, J., Cho, W., Shin, K.-S., Kim, H., & Lee, H.-J. (2016). Adaptive Memory Controller for High-performance Multi-channel Memory. JSTS:Journal of Semiconductor Technology and Science, 16(6), 808-816. doi:10.5573/jsts.2016.16.6.808Yuan, L., Liu, H., Jia, P., & Yang, Y. (2015). Reliability-Based ECC System for Adaptive Protection of NAND Flash Memories. 2015 Fifth International Conference on Communication Systems and Network Technologies. doi:10.1109/csnt.2015.23Zhou, Y., Wu, F., Lu, Z., He, X., Huang, P., & Xie, C. (2019). SCORE. ACM Transactions on Architecture and Code Optimization, 15(4), 1-25. doi:10.1145/3291052Lu, S.-K., Li, H.-P., & Miyase, K. (2018). Adaptive ECC Techniques for Reliability and Yield Enhancement of Phase Change Memory. 2018 IEEE 24th International Symposium on On-Line Testing And Robust System Design (IOLTS). doi:10.1109/iolts.2018.8474118Chen, J., Andjelkovic, M., Simevski, A., Li, Y., Skoncej, P., & Krstic, M. (2019). Design of SRAM-Based Low-Cost SEU Monitor for Self-Adaptive Multiprocessing Systems. 2019 22nd Euromicro Conference on Digital System Design (DSD). doi:10.1109/dsd.2019.00080Wang, X., Jiang, L., & Chakrabarty, K. (2020). LSTM-based Analysis of Temporally- and Spatially-Correlated Signatures for Intermittent Fault Detection. 2020 IEEE 38th VLSI Test Symposium (VTS). doi:10.1109/vts48691.2020.9107600Ebrahimi, H., & G. Kerkhoff, H. (2018). Intermittent Resistance Fault Detection at Board Level. 2018 IEEE 21st International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS). doi:10.1109/ddecs.2018.00031Ebrahimi, H., & Kerkhoff, H. G. (2020). A New Monitor Insertion Algorithm for Intermittent Fault Detection. 2020 IEEE European Test Symposium (ETS). doi:10.1109/ets48528.2020.9131563Hsiao, M. Y. (1970). A Class of Optimal Minimum Odd-weight-column SEC-DED Codes. IBM Journal of Research and Development, 14(4), 395-401. doi:10.1147/rd.144.0395Benso, A., & Prinetto, P. (Eds.). (2004). Fault Injection Techniques and Tools for Embedded Systems Reliability Evaluation. Frontiers in Electronic Testing. doi:10.1007/b105828Gracia, J., Saiz, L. J., Baraza, J. C., Gil, D., & Gil, P. J. (2008). Analysis of the influence of intermittent faults in a microcontroller. 2008 11th IEEE Workshop on Design and Diagnostics of Electronic Circuits and Systems. doi:10.1109/ddecs.2008.4538761ZC702 Evaluation Board for the Zynq-7000 XC7Z020 SoChttps://www.xilinx.com/support/documentation/boards_and_kits/zc702_zvik/ug850-zc702-eval-bd.pd

Towards Design and Analysis For High-Performance and Reliable SSDs

NAND Flash-based Solid State Disks have many attractive technical merits, such as low power consumption, light weight, shock resistance, sustainability of hotter operation regimes, and extraordinarily high performance for random read access, which makes SSDs immensely popular and be widely employed in different types of environments including portable devices, personal computers, large data centers, and distributed data systems. However, current SSDs still suffer from several critical inherent limitations, such as the inability of in-place-update, asymmetric read and write performance, slow garbage collection processes, limited endurance, and degraded write performance with the adoption of MLC and TLC techniques. To alleviate these limitations, we propose optimizations from both specific outside applications layer and SSDs\u27 internal layer. Since SSDs are good compromise between the performance and price, so SSDs are widely deployed as second layer caches sitting between DRAMs and hard disks to boost the system performance. Due to the special properties of SSDs such as the internal garbage collection processes and limited lifetime, traditional cache devices like DRAM and SRAM based optimizations might not work consistently for SSD-based cache. Therefore, for the outside applications layer, our work focus on integrating the special properties of SSDs into the optimizations of SSD caches. Moreover, our work also involves the alleviation of the increased Flash write latency and ECC complexity due to the adoption of MLC and TLC technologies by analyzing the real work workloads

Designs for increasing reliability while reducing energy and increasing lifetime

In the last decades, the computing technology experienced tremendous developments. For instance, transistors' feature size shrank to half at every two years as consistently from the first time Moore stated his law. Consequently, number of transistors and core count per chip doubles at each generation. Similarly, petascale systems that have the capability of processing more than one billion calculation per second have been developed. As a matter of fact, exascale systems are predicted to be available at year 2020. However, these developments in computer systems face a reliability wall. For instance, transistor feature sizes are getting so small that it becomes easier for high-energy particles to temporarily flip the state of a memory cell from 1-to-0 or 0-to-1. Also, even if we assume that fault-rate per transistor stays constant with scaling, the increase in total transistor and core count per chip will significantly increase the number of faults for future desktop and exascale systems. Moreover, circuit ageing is exacerbated due to increased manufacturing variability and thermal stresses, therefore, lifetime of processor structures are becoming shorter. On the other side, due to the limited power budget of the computer systems such that mobile devices, it is attractive to scale down the voltage. However, when the voltage level scales to beyond the safe margin especially to the ultra-low level, the error rate increases drastically. Nevertheless, new memory technologies such as NAND flashes present only limited amount of nominal lifetime, and when they exceed this lifetime, they can not guarantee storing of the data correctly leading to data retention problems. Due to these issues, reliability became a first-class design constraint for contemporary computing in addition to power and performance. Moreover, reliability even plays increasingly important role when computer systems process sensitive and life-critical information such as health records, financial information, power regulation, transportation, etc. In this thesis, we present several different reliability designs for detecting and correcting errors occurring in processor pipelines, L1 caches and non-volatile NAND flash memories due to various reasons. We design reliability solutions in order to serve three main purposes. Our first goal is to improve the reliability of computer systems by detecting and correcting random and non-predictable errors such as bit flips or ageing errors. Second, we aim to reduce the energy consumption of the computer systems by allowing them to operate reliably at ultra-low voltage level. Third, we target to increase the lifetime of new memory technologies by implementing efficient and low-cost reliability schemes