Surface profile and acoustic emission as diagnostics of tool wear in face milling

This thesis examines the relationship between progressive wear of cutting inserts during a face milling operation and the acoustic emission and surface profile generated by that process. Milling experiments were performed on a range of workpiece materials using both eight point and single point inseý arrangements contained in two cutters of different geometries. Surface profile measurements were made using a stylus profilometer at intervals during the experiments. Correlations between the wear state as measured by the length of the flank wear land (Vb) and the spatial frequency content of the surface profiles were established. Investigations into the variation of fractal dimension of a milled surface with Vb demonstrated that no correlation was observable between these quantities. Acoustic emission (AE) measurements were made using a non-contacting fibre-optic interferometer which allowed the rms of the AE signal and its mean frequency to be determined. Correlations between these parameters and Vb were established for a range of workpiece materials and cutter geometries. It was shown that neither AE measurements nor surface profile measurements in isolation could predict tool wear state in all situations. The advantages of fusing data from surface profile and AE sources via an artificial neural network in tool wear monitoring were demonstrate

Computer Numerical Control CNC Machine Health Prediction using ‎Multi-domain Feature Extraction and Deep Neural Network Regression

Tool wear monitoring has become more vital in intelligent production to enhance Computer Numerical Control CNC machine health state. Multidomain features may effectively define tool wear status and help tool wear prediction. Prognostics and health management (PHM) plays a vital role in condition-based maintenance (CBM) to prevent rather than detect malfunctions in machinery. This has great advantage of saving costs of fault repair including human effort, financial costs as long as power and energy consumption. The huge evolution of Industrial Internet of Things (IIOT) and industrial big data analytics has made Deep Learning a growing field of research. The PHM society has held many competitions including PHM10 concerning CNC milling machine cutters data for tool wear prediction The purpose of this paper is to predict tool wear of CNC cutters and. We adopted a multi-domain feature extraction method for health statement of the cutters. and a deep neural network DNN method for tool wear prediction

A hybrid prognostics approach for motorized spindle-tool holder remaining useful life prediction

The quality and efficiency of high-speed machining are restricted by the matching performance of the motorized spindle-tool holder. In high speed cutting process, the mating surface is subjected to alternating torque, repeated clamping wear and centrifugal force, which results in serious degradation of mating performance. Therefore, for the purpose of the optimum maintenance time, periodic evaluation and prediction of remaining useful life (RUL) should be carried out. Firstly, the mapping model between the current of the motorized spindle and matching performance was extracted, and the degradation characteristics of spindle-tool holder were emphatically analyzed. After the original current is de-noised by an adaptive threshold function, the extent of degradation was identified by the amplitudes of wavelet packet entropy. A hybrid prognostics combining Relevance Vector Machine (RVM) i.e. AI-model with power regression i.e. statistical model was proposed to predict the RUL. Finally, the proposed scheme was verified based on a motorized spindle reliability test platform. The experimental results show that the current signal processing method based on wavelet packet and entropy can reflect the change of the degradation characteristics sensitively. Compared with other two similar models, the hybrid model proposed can accurately predict the RUL. This model is suitable for complex and high reliability equipment when Condition Monitoring (CM) data is scarcer

Smart Sensor Monitoring in Machining of Difficult-to-cut Materials

The research activities presented in this thesis are focused on the development of smart sensor monitoring procedures applied to diverse machining processes with particular reference to the machining of difficult-to-cut materials. This work will describe the whole smart sensor monitoring procedure starting from the configuration of the multiple sensor monitoring system for each specific application and proceeding with the methodologies for sensor signal detection and analysis aimed at the extraction of signal features to feed to intelligent decision-making systems based on artificial neural networks. The final aim is to perform tool condition monitoring in advanced machining processes in terms of tool wear diagnosis and forecast, in the perspective of zero defect manufacturing and green technologies. The work has been addressed within the framework of the national MIUR PON research project CAPRI, acronym for “Carrello per atterraggio con attuazione intelligente” (Landing Gear with Intelligent Actuation), and the research project STEP FAR, acronym for “Sviluppo di materiali e Tecnologie Ecocompatibili, di Processi di Foratura, taglio e di Assemblaggio Robotizzato” (Development of eco-compatible materials and technologies for robotised drilling and assembly processes). Both projects are sponsored by DAC, the Campania Technological Aerospace District, and involve two aerospace industries, Magnaghi Aeronautica S.p.A. and Leonardo S.p.A., respectively. Due to the industrial framework in which the projects were developed and taking advantage of the support from the industrial partners, the project activities have been carried out with the aim to contribute to the scientific research in the field of machining process monitoring as well as to promote the industrial applicability of the results. The thesis was structured in order to illustrate all the methodologies, the experimental tests and the results obtained from the research activities. It begins with an introduction to “Sensor monitoring of machining processes” (Chapter 2) with particular attention to the main sensor monitoring applications and the types of sensors which are employed in machining. The key methods for advanced sensor signal processing, including the implementation of sensor fusion technology, are discussed in details as they represent the basic input for cognitive decision-making systems construction. The chapter finally presents a brief discussion on cloud-based manufacturing which will represent one of the future developments of this research work. Chapters 3 and 4 illustrate the case studies of machining process sensor monitoring investigated in the research work. Within the CAPRI project, the feasibility of the dry turning process of Ti6Al4V alloy (Chapter 3) was studied with particular attention to the optimization of the machining parameters avoiding the use of coolant fluids. Since very rapid tool wear is experienced during dry machining of Titanium alloys, the multiple sensor monitoring system was used in order to develop a methodology based on a smart system for on line tool wear detection in terms of maximum flank wear land. Within the STEP FAR project, the drilling process of carbon fibre reinforced (CFRP) composite materials was studied using diverse experimental set-ups. Regarding the tools, three different types of drill bit were employed, including traditional as well as innovative geometry ones. Concerning the investigated materials, two different types of stack configurations were employed, namely CFRP/CFRP stacks and hybrid Al/CFRP stacks. Consequently, the machining parameters for each experimental campaign were varied, and also the methods for signal analysis were changed to verify the performance of the different methodologies. Finally, for each case different neural network configurations were investigated for cognitive-based decision making. First of all, the applicability of the system was tested in order to perform tool wear diagnosis and forecast. Then, the discussion proceeds with a further aim of the research work, which is the reduction of the number of selected sensor signal features, in order to improve the performance of the cognitive decision-making system, simplify modelling and facilitate the implementation of these methodologies in a cloud manufacturing approach to tool condition monitoring. Sensor fusion methodologies were applied to the extracted and selected sensor signal features in the perspective of feature reduction with the purpose to implement these procedures for big data analytics within the Industry 4.0 framework. In conclusion, the positive impact of the proposed tool condition monitoring methodologies based on multiple sensor signal acquisition and processing is illustrated, with particular reference to the reliable assessment of tool state in order to avoid too early or too late cutting tool substitution that negatively affect machining time and cost

Monitoring of hybrid manufacturing using acoustic emission sensor

The approach of hybrid manufacturing addressed in this research uses two manufacturing processes, one process builds a metal part using laser metal deposition, and the other process finishes the part using a milling machining. The ability to produce complete functioning parts in a short time with minimal cost and energy consumption has made hybrid manufacturing popular in many industries for parts repair and rapid prototyping. Monitoring of hybrid manufacturing processes has become popular because it increases the quality and accuracy of the parts produced and reduces both costs and production time. The goal of this work is to monitor the entire hybrid manufacturing process. During the laser metal deposition, the acoustic emission sensor will monitor the defect formation. The acoustic emission sensor will monitor the depth of cut during milling machining. There are three tasks in this study. The first task addresses depth-of-cut detection and tool-workpiece engagement using an acoustic emission monitoring system during milling machining for a deposited material. The second task, defects monitoring system was proposed to detect and classify defects in real time using an acoustic emission (AE) sensor and an unsupervised pattern recognition analysis (K-means clustering) in conjunction with a principal component analysis (PCA). In the third task, a study was conducted to investigate the ability of AE to detect and identify defects during laser metal deposition using a Logistic Regression Model (LR) and an Artificial Neural Network (ANN) --Abstract, page iv

Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision

Ceramic tools are prone to chipping due to their low impact toughness. Tool chipping significantly decreases the surface finish quality and dimensional accuracy of the workpiece. Thus, in-process detection of chipping in ceramic tools is important especially in unattended machining. Existing in-process tool failure detection methods using sensor signals have limitations in detecting tool chipping. The monitoring of tool wear from the workpiece profile using machine vision has great potential to be applied in-process, however no attempt has been made to detect tool chipping. In this work, a vision-based approach has been developed to detect tool chipping in ceramic insert from 2-D workpiece profile signature. The profile of the workpiece surface was captured using a DSLR camera. The surface profile was extracted to sub-pixel accuracy using invariant moment method. The effect of chipping in the ceramic cutting tools on the workpiece profile was investigated using autocorrelation function (ACF) and fast Fourier transform (FFT). Detection of onset tool chipping was conducted by using the sub-window FFT and continuous wavelet transform (CWT). Chipping in the ceramic tool was found to cause the peaks of ACF of the workpiece profile to decrease rapidly as the lag distance increased and deviated significantly from one another at different workpiece rotation angles. From FFT analysis the amplitude of the fundamental feed frequency increases steadily with cutting duration during gradual wear, however, fluctuates significantly after tool has chipped. The stochastic behaviour of the cutting process after tool chipping leads to a sharp increase in the amplitude of spatial frequencies below the fundamental feed frequency. CWT method was found more effective to detect the onset of tool chipping at 16.5 s instead of 17.13 s by sub-window FFT. Root mean square of CWT coefficients for the workpiece profile at higher scale band was found to be more sensitive to chipping and thus can be used as an indicator to detect the occurrence of the tool chipping in ceramic inserts

Discrete wavelet transforms analysis of vibration signals for correlating tool wear in diamond turning of additive manufactured Ti-6Al-4V alloy

Ultra-precision machining (UPM) of Ti-6Al-4V alloy is widely regarded as a challenging material processing due to excessive tool wear and chemical reactivity of the tool and workpiece. Tool wear has a significant influence on the surface quality and also causes damage to the substrate. Therefore, it is critical to consider the tool condition during diamond turning, especially as precision machining moves toward intelligent systems. Consequently, there is a need for effective ways for in-process tool wear monitoring in UPM. This study aims to monitor the diamond tool wear using time-frequency-based wavelet analysis on vibrational signals acquired during the machining of Additively Manufactured (AM) Ti6Al4V alloy. The analysis employed Daubechies wavelet (db4, level 8) to establish a correlation between the Standard Deviation (SD) of the magnitude in the decomposed vibrational signal obtained from both the fresh and used tools. The analysis revealed that at a feed rate of 1 mm/min, the change in SD is 32.3% whereas at a feed rate of 5 mm/min, the change in SD is 8.4%. Furthermore, the flank wear and microfractures are observed using a scanning electron microscope on the respective flank and rake face of the diamond tool.The author(s) received no financial support for the research, authorship, and/or publication of this article