Wireless Power Transfer: Survey and Roadmap

Wireless power transfer (WPT) technologies have been widely used in many areas, e.g., the charging of electric toothbrush, mobile phones, and electric vehicles. This paper introduces fundamental principles of three WPT technologies, i.e., inductive coupling-based WPT, magnetic resonant coupling-based WPT, and electromagnetic radiation-based WPT, together with discussions of their strengths and weaknesses. Main research themes are then presented, i.e., improving the transmission efficiency and distance, and designing multiple transmitters/receivers. The state-of-the-art techniques are reviewed and categorised. Several WPT applications are described. Open research challenges are then presented with a brief discussion of potential roadmap

Analytical Comparison on Inductive Wireless Power Transfer System for Biomedical Devices

This paper presents a comparative analysis for the four basic topologies of inductive link wireless power transmission, thereby allowing designers to select the most appropriate topology according to the requirements of the application. Wireless energy transfer systems applied for diagnostic or monitoring signals in biomedical devices to eliminate the needs for tethering wires or implantable batteries. Inductive link studied as main technique in wireless power transmission for biomedical devices. In various applications, the maximum delivered power and maximum efficiency of an inductive link system are two important factors to be considered. The efficiency expression for power transfer of the four topologies (series – series, parallel – series, parallel –parallel, series-parallel) has been derived. For biomedical devices, theoretically the series – series topology has been identified as the most suited due to its independency on the coupling coefficient however, series-parallel topology is widely used in practice. The circuits have been simulated using ADS simulator of keysight technology at a resonant frequency of 13.56MHz

Matching Network Elimination in Broadband Rectennas for High-Efficiency Wireless Power Transfer and Energy Harvesting

Impedance matching networks for nonlinear devices such as amplifiers and rectifiers are normally very challenging to design, particularly for broadband and multiband devices. A novel design concept for a broadband high-efficiency rectenna without using matching networks is presented in this paper for the first time. An off-center-fed dipole antenna with relatively high input impedance over a wide frequency band is proposed. The antenna impedance can be tuned to the desired value and directly provides a complex conjugate match to the impedance of a rectifier. The received RF power by the antenna can be delivered to the rectifier efficiently without using impedance matching networks; thus, the proposed rectenna is of a simple structure, low cost, and compact size. In addition, the rectenna can work well under different operating conditions and using different types of rectifying diodes. A rectenna has been designed and made based on this concept. The measured results show that the rectenna is of high power conversion efficiency (more than 60%) in two wide bands, which are 0.9-1.1 and 1.8-2.5 GHz, for mobile, Wi-Fi, and ISM bands. Moreover, by using different diodes, the rectenna can maintain its wide bandwidth and high efficiency over a wide range of input power levels (from 0 to 23 dBm) and load values (from 200 to 2000 Ω). It is, therefore, suitable for high-efficiency wireless power transfer or energy harvesting applications. The proposed rectenna is general and simple in structure without the need for a matching network hence is of great significance for many applications

FSK-based Simultaneous Wireless Information and Power Transfer in Inductively Coupled Resonant Circuits Exploiting Frequency Splitting

Inductively coupled resonant circuits are affected by the so-called frequency splitting phenomenon at short distances. In the area of power electronics, tracking of one of the peak frequencies is state-of-the-art. In the data transmission community, however, the frequency splitting effect is often ignored. Particularly, modulation schemes have not yet been adapted to the bifurcation phenomenon. We argue that binary frequency shift keying (2-ary FSK) is a low-cost modulation scheme which well matches the double-peak voltage transfer function $H(s)$, particularly when the quality factor $Q$ is large, whereas most other modulation schemes suffer from the small bandwidths of the peaks. Additionally we show that a rectified version of 2-ary FSK, coined rectified FSK (RFSK), is even more attractive from output power and implementation points of view. Analytical and numerical contributions include the efficiency factor, the impulse response, and the bit error performance. A low-cost incoherent receiver is proposed. Theoretical examinations are supported by an experimental prototype

The Parameters Optimization of MCR-WPT System Based on the Improved Genetic Simulated Annealing Algorithm

To solve the problem of parameter selection during the design of magnetically coupled resonant wireless power transmission system (MCR-WPT), this paper proposed an improved genetic simulated annealing algorithm. Firstly, the equivalent circuit of the system is analysis in this study and a nonlinear programming mathematical model is built. Secondly, in place of the penalty function method in the genetic algorithm, the selection strategy based on the distance between individuals is adopted to select individual. In this way, it reduces the excess empirical parameters. Meanwhile, it can improve the convergence rate and the searching ability by calculating crossover probability and mutation probability according to the variance of population’s fitness. At last, the simulated annealing operator is added to increase local search ability of the method. The simulation shows that the improved method can break the limit of the local optimum solution and get the global optimum solution faster. The optimized system can achieve the practical requirements