Novel Approaches for Structural Health Monitoring

The thirty-plus years of progress in the field of structural health monitoring (SHM) have left a paramount impact on our everyday lives. Be it for the monitoring of fixed- and rotary-wing aircrafts, for the preservation of the cultural and architectural heritage, or for the predictive maintenance of long-span bridges or wind farms, SHM has shaped the framework of many engineering fields. Given the current state of quantitative and principled methodologies, it is nowadays possible to rapidly and consistently evaluate the structural safety of industrial machines, modern concrete buildings, historical masonry complexes, etc., to test their capability and to serve their intended purpose. However, old unsolved problematics as well as new challenges exist. Furthermore, unprecedented conditions, such as stricter safety requirements and ageing civil infrastructure, pose new challenges for confrontation. Therefore, this Special Issue gathers the main contributions of academics and practitioners in civil, aerospace, and mechanical engineering to provide a common ground for structural health monitoring in dealing with old and new aspects of this ever-growing research field

Development of Non-Destructive Testing by Eddy Currents for Highly Demanding Engineering Applications

Defect detection with Non-Destructive Testing (NDT) is essential in accidents prevention, requiring R&TD to generate new scientific and procedural knowledge for new products with high safety requirements. A current challenge lies in the detection of surface and sub-surface micro defects with NDT by Eddy Currents (EC). The main objective of this work was the development of applied research, technological innovation and experimental validation of EC customized systems for three highly demanding inspection scenarios: micro defects in tubular geometries; brazed joints for the automotive industry; and high-speed moving composite materials. This objective implied starting from the scientific fundamentals of NDT by EC to design and simulate EC probes and the prototypes developed were tested in industrial environment, reaching a TRL ≈ 5. Another objective, of a more scientific and disruptive nature, was to test a new technique for the creation of EC in the materials to be inspect, named Magnetic Permeability Pattern Substrate (MPPS). This technique consists on the development of substrates/films with patterns of different magnetic permeabilities rather than the use of excitation bobbin coils or filaments of complex geometry. The experimental results demonstrated that the prototypes developed for the three industrial applications studied outperformed the state of the art, allowing the detection of target defects with a very good signal-to-noise ratio: in tubular geometries defects with depth of 0.5 mm and thickness of 0.2 mm in any scanning position; in the laser brazed weld beads pores with 0.13 mm diameter and internal artificial defects 1 mm from the weld surface; in composite materials defects under 1 mm at speeds up to 4 m/s and 3 mm lift-off. The numerical simulations assisted the probe design, allowing to describe and characterize electrical and magnetic phenomena. The new MPPS concept for the introduction of EC was validated numerically and experimentally