The impact of Rayleigh fading channel effects on the RF-DNA fingerprinting process

The Internet of Things (IoT) consists of many electronic and electromechanical devices connected to the Internet. It is estimated that the number of connected IoT devices will be between 20 and 50 billion by the year 2020. The need for mechanisms to secure IoT networks will increase dramatically as 70% of the edge devices have no encryption. Previous research has proposed RF-DNA fingerprinting to provide wireless network access security through the exploitation of PHY layer features. RF-DNA fingerprinting takes advantage of unique and distinct characteristics that unintentionally occur within a given radio’s transmit chain during waveform generation. In this work, the application of RF-DNA fingerprinting is extended by developing a Nelder-Mead-based algorithm that estimates the coefficients of an indoor Rayleigh fading channel. The performance of the Nelder-Mead estimator is compared to the Least Square estimator and is assessed with degrading signal-to-noise ratio. The Rayleigh channel coefficients set estimated by the Nelder-Mead estimator is used to remove the multipath channel effects from the radio signal. The resulting channel-compensated signal is the region where the RF-DNA fingerprints are generated and classified. For a signal-to-noise ratio greater than 21 decibels, an average percent correct classification of more than 95% was achieved in a two-reflector channel

Receiver design for nonlinearly distorted OFDM : signals applications in radio-over-fiber systems

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 201

Algorithms for channel impairment mitigation in broadband wireless communications

Ph.DDOCTOR OF PHILOSOPH

Iterative joint frequency offset and channel estimation for OFDM systems using first and second order approximation algorithms

[[abstract]]To implement an algorithm for joint estimation of carrier frequency offset (CFO) and channel impulse response (CIR) in orthogonal frequency division multiplexing (OFDM) systems, the maximum-likelihood criterion is commonly adopted. A major difficulty arises from the highly nonlinear nature of the log-likelihood function which renders local extrema or multiple solutions for the CFO and CIR estimators. Use of an approximation method coupled with an adaptive iteration algorithm has been a popular approach to ease problem solving. The approximation used in those existing methods is usually of the first order level. Here, in addition to a new first order approximation method, we also propose a second order approximation method. Further, for the part of the adaptive iteration algorithm, we adopt a new technique which will enable performance improvement. Our first order approximation method is found to outperform the existing ones in terms of estimation accuracies, tracking range, computation complexity, and convergence speed. As expected, our second order approximation method provides an even further improvement at the expense of higher computation complication.[[notice]]補正完畢[[journaltype]]國外[[incitationindex]]SCI[[booktype]]紙本[[booktype]]電子版[[countrycodes]]DE

Frequency tracking by method of least squares combined with channel estimation for OFDM over mobile wireless channels

[[abstract]]To track frequency offset and time-varying channel in orthogonal frequency division multiplexing (OFDM) systems over mobile wireless channels, a common technique is, based on one OFDM training block sample, to apply the maximum-likelihood (ML) algorithm to perform joint frequency tracking and channel estimation employing some adaptive iteration processes. The major drawback of such joint estimation techniques is the local extrema problem arising from the highly nonlinear nature of the log-likelihood function. This makes the joint estimation process very difficult and complicated, and many a time the results are not very satisfactory if the algorithm is not well designed. In this study, rather than using the ML algorithm, we shall apply the method of least squares (LS) for frequency tracking utilizing repeated OFDM training blocks. As will be seen, by using such an LS approach, the frequency offset estimation requires no channel knowledge. The channel state can be estimated separately after the LS frequency offset correction. This not only circumvents the local extrema complication, but also obviates the need for the lengthy adaptive iteration process of joint estimation thus greatly simplifies the entire estimation process. Most importantly, our technique can achieve excellent estimation performance as compared to the usual ML algorithms.[[incitationindex]]SCI[[booktype]]紙

Single carrier frequency domain equalization and energy efficiency optimization for MIMO cognitive radio.

This dissertation studies two separate topics in wireless communication systems. One topic focuses on the Single Carrier Frequency Domain Equalization (SC-FDE), which is a promising technique to mitigate the multipath effect in the broadband wireless communication. Another topic targets on the energy efficiency optimization in a multiple input multiple output (MIMO) cognitive radio network. For SC-FDE, the conventional linear receivers suffer from the noise amplification in deep fading channel. To overcome this, a fractional spaced frequency domain (FSFD) receiver based on frequency domain oversampling (FDO) is proposed for SC-FDE to improve the performance of the linear receiver under deep fading channels. By properly designing the guard interval, a larger sized Discrete Fourier Transform (DFT) is equipped to oversample the received signal in frequency domain. Thus, the effect of frequency-selective fading can still be eliminated by a one-tap frequency domain filter. Two types of FSFD receivers are proposed based on the least square (LS) and minimum mean square error (MMSE) criterion. Both the semi-analytical analysis and simulation results are given to evaluate the performance of the proposed receivers. Another challenge in SC-FDE is the in-phase/quadrature phase (IQ) imbalance caused by unideal radio frequency (RF) front-end at the transmitter or the receiver. Most existing works in single carrier transmission employ linear compensation methods, such as LS and MMSE, to combat the interference caused by IQ imbalance. Actually, for single carrier transmissions, it is possible for the receivers to adopt advanced nonlinear compensation methods to improve the system performance under IQ imbalance. For such purpose, an iterative decision feedback receiver is proposed to compensate the IQ imbalance caused by unideal RF front-end in SC-FDE. Numerical results show that the proposed iterative IQ imbalance compensation can significantly improve the performance of SC-FDE system under IQ imbalance compared with the conventional linear method. For the energy efficiency optimization in the MIMO cognitive radio network, multiple secondary users (SUs) coexisting with a primary user (PU) adjust their antenna radiation patterns and power allocations to achieve energy-efficient transmission. The optimization problems are formulated to maximize the energy efficiency of a cognitive radio network in both distributed and centralized point of views. Also, constraints on the transmission power and the interference to PU are introduced to protect the PU’s transmission. In order to solve the non-convex optimization problems, convex relaxations are used to transform them into equivalent problems with better tractability. Then three optimization algorithms are proposed to find the energy-efficient transmission strategies. Simulation results show that the proposed energy-efficiency optimization algorithms outperform the existing algorithms

Estimation and detection techniques for doubly-selective channels in wireless communications

A fundamental problem in communications is the estimation of the channel. The signal transmitted through a communications channel undergoes distortions so that it is often received in an unrecognizable form at the receiver. The receiver must expend significant signal processing effort in order to be able to decode the transmit signal from this received signal. This signal processing requires knowledge of how the channel distorts the transmit signal, i.e. channel knowledge. To maintain a reliable link, the channel must be estimated and tracked by the receiver. The estimation of the channel at the receiver often proceeds by transmission of a signal called the 'pilot' which is known a priori to the receiver. The receiver forms its estimate of the transmitted signal based on how this known signal is distorted by the channel, i.e. it estimates the channel from the received signal and the pilot. This design of the pilot is a function of the modulation, the type of training and the channel. [Continues.