10,634 research outputs found
NASA Automated Rendezvous and Capture Review. Executive summary
In support of the Cargo Transfer Vehicle (CTV) Definition Studies in FY-92, the Advanced Program Development division of the Office of Space Flight at NASA Headquarters conducted an evaluation and review of the United States capabilities and state-of-the-art in Automated Rendezvous and Capture (AR&C). This review was held in Williamsburg, Virginia on 19-21 Nov. 1991 and included over 120 attendees from U.S. government organizations, industries, and universities. One hundred abstracts were submitted to the organizing committee for consideration. Forty-two were selected for presentation. The review was structured to include five technical sessions. Forty-two papers addressed topics in the five categories below: (1) hardware systems and components; (2) software systems; (3) integrated systems; (4) operations; and (5) supporting infrastructure
Roving vehicle motion control Final report
Roving vehicle motion control for unmanned planetary and lunar exploratio
An integrated Rotorcraft Avionics/Controls Architecture to support advanced controls and low-altitude guidance flight research
Salient design features of a new NASA/Army research rotorcraft--the Rotorcraft-Aircrew Systems Concepts Airborne Laboratory (RASCAL) are described. Using a UH-60A Black Hawk helicopter as a baseline vehicle, the RASCAL will be a flying laboratory capable of supporting the research requirements of major NASA and Army guidance, control, and display research programs. The paper describes the research facility requirements of these programs together with other critical constraints on the design of the research system. Research program schedules demand a phased development approach, wherein specific research capability milestones are met and flight research projects are flown throughout the complete development cycle of the RASCAL. This development approach is summarized, and selected features of the research system are described. The research system includes a real-time obstacle detection and avoidance system which will generate low-altitude guidance commands to the pilot on a wide field-of-view, color helmet-mounted display and a full-authority, programmable, fault-tolerant/fail-safe, fly-by-wire flight control system
Local Motion Planner for Autonomous Navigation in Vineyards with a RGB-D Camera-Based Algorithm and Deep Learning Synergy
With the advent of agriculture 3.0 and 4.0, researchers are increasingly
focusing on the development of innovative smart farming and precision
agriculture technologies by introducing automation and robotics into the
agricultural processes. Autonomous agricultural field machines have been
gaining significant attention from farmers and industries to reduce costs,
human workload, and required resources. Nevertheless, achieving sufficient
autonomous navigation capabilities requires the simultaneous cooperation of
different processes; localization, mapping, and path planning are just some of
the steps that aim at providing to the machine the right set of skills to
operate in semi-structured and unstructured environments. In this context, this
study presents a low-cost local motion planner for autonomous navigation in
vineyards based only on an RGB-D camera, low range hardware, and a dual layer
control algorithm. The first algorithm exploits the disparity map and its depth
representation to generate a proportional control for the robotic platform.
Concurrently, a second back-up algorithm, based on representations learning and
resilient to illumination variations, can take control of the machine in case
of a momentaneous failure of the first block. Moreover, due to the double
nature of the system, after initial training of the deep learning model with an
initial dataset, the strict synergy between the two algorithms opens the
possibility of exploiting new automatically labeled data, coming from the
field, to extend the existing model knowledge. The machine learning algorithm
has been trained and tested, using transfer learning, with acquired images
during different field surveys in the North region of Italy and then optimized
for on-device inference with model pruning and quantization. Finally, the
overall system has been validated with a customized robot platform in the
relevant environment
Transfer Learning-Based Crack Detection by Autonomous UAVs
Unmanned Aerial Vehicles (UAVs) have recently shown great performance
collecting visual data through autonomous exploration and mapping in building
inspection. Yet, the number of studies is limited considering the post
processing of the data and its integration with autonomous UAVs. These will
enable huge steps onward into full automation of building inspection. In this
regard, this work presents a decision making tool for revisiting tasks in
visual building inspection by autonomous UAVs. The tool is an implementation of
fine-tuning a pretrained Convolutional Neural Network (CNN) for surface crack
detection. It offers an optional mechanism for task planning of revisiting
pinpoint locations during inspection. It is integrated to a quadrotor UAV
system that can autonomously navigate in GPS-denied environments. The UAV is
equipped with onboard sensors and computers for autonomous localization,
mapping and motion planning. The integrated system is tested through
simulations and real-world experiments. The results show that the system
achieves crack detection and autonomous navigation in GPS-denied environments
for building inspection
Encoderless Gimbal Calibration of Dynamic Multi-Camera Clusters
Dynamic Camera Clusters (DCCs) are multi-camera systems where one or more
cameras are mounted on actuated mechanisms such as a gimbal. Existing methods
for DCC calibration rely on joint angle measurements to resolve the
time-varying transformation between the dynamic and static camera. This
information is usually provided by motor encoders, however, joint angle
measurements are not always readily available on off-the-shelf mechanisms. In
this paper, we present an encoderless approach for DCC calibration which
simultaneously estimates the kinematic parameters of the transformation chain
as well as the unknown joint angles. We also demonstrate the integration of an
encoderless gimbal mechanism with a state-of-the art VIO algorithm, and show
the extensions required in order to perform simultaneous online estimation of
the joint angles and vehicle localization state. The proposed calibration
approach is validated both in simulation and on a physical DCC composed of a
2-DOF gimbal mounted on a UAV. Finally, we show the experimental results of the
calibrated mechanism integrated into the OKVIS VIO package, and demonstrate
successful online joint angle estimation while maintaining localization
accuracy that is comparable to a standard static multi-camera configuration.Comment: ICRA 201
An Effective Multi-Cue Positioning System for Agricultural Robotics
The self-localization capability is a crucial component for Unmanned Ground
Vehicles (UGV) in farming applications. Approaches based solely on visual cues
or on low-cost GPS are easily prone to fail in such scenarios. In this paper,
we present a robust and accurate 3D global pose estimation framework, designed
to take full advantage of heterogeneous sensory data. By modeling the pose
estimation problem as a pose graph optimization, our approach simultaneously
mitigates the cumulative drift introduced by motion estimation systems (wheel
odometry, visual odometry, ...), and the noise introduced by raw GPS readings.
Along with a suitable motion model, our system also integrates two additional
types of constraints: (i) a Digital Elevation Model and (ii) a Markov Random
Field assumption. We demonstrate how using these additional cues substantially
reduces the error along the altitude axis and, moreover, how this benefit
spreads to the other components of the state. We report exhaustive experiments
combining several sensor setups, showing accuracy improvements ranging from 37%
to 76% with respect to the exclusive use of a GPS sensor. We show that our
approach provides accurate results even if the GPS unexpectedly changes
positioning mode. The code of our system along with the acquired datasets are
released with this paper.Comment: Accepted for publication in IEEE Robotics and Automation Letters,
201
The Leeds Advanced Driving Simulator: Three Years In Operation
The Leeds Advanced Driving Simulator (LADS) at the University of Leeds is a medium cost fixed-base simulator and its development has been funded by the Science and Engineering Research Council (now EPSRC). It has been fully operational since mid-1993 for rural-road scenes (Carsten and Gallimore, 1993) but currently simulation of urban environments and vehicle interactions are possible too. This paper focuses on the recent development of LADS. Also detailed other recent research projects carried out in the simulator to date
- …