411 research outputs found
A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries
Engineering andPhysical Science ResearchCouncil
(EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt
to improve standard cell libraries aimed at operation in the subthreshold regime and in
Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is
examined, with particular emphasis on how subthreshold physical effects degrade
robustness, variability and performance. How prevalent these physical effects are in a
commercial 65nm library is then investigated by extensive modeling of a BSIM4.5
compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out
and post-layout parasitically extracted models simulated to determine the
advantages/disadvantages of each. Full custom ring oscillators are designed and
manufactured. Measured results reveal a close correlation with the simulated results, with
frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices
respectively. The experiment provides the first silicon evidence of the improvement
capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well
as a mechanism of additional temperature stability in the subthreshold regime.
A novel sizing strategy is proposed and pursued to determine whether it is able to produce
a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit
AES cores are synthesized from the novel sizing strategy and compared against a third
AES core synthesized from a state-of-the-art subthreshold standard cell library used by
ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency
improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior
over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in
energy-per-cycle of 24% and frequency improvement of 8.65X.
A comparison to prior art is then performed. Valid cases are presented where the
proposed sizing strategy would be a candidate to produce superior subthreshold circuits
Recommended from our members
Electromigration modeling and layout optimization for advanced VLSI
textElectromigration (EM) is a critical problem for interconnect reliability in advanced VLSI design. Because EM is a strong function of current density, a smaller cross-sectional area of interconnects can degrade the EM-related lifetime of IC, which is expected to become more severe in future technology nodes. Moreover, as EM is governed by various factors such as temperature, material property, geometrical shape, and mechanical stress, different interconnect structures can have distinct EM issues and solutions to mitigate them. For example, one of the most prominent technologies, die stacking technology of three-dimensional (3D) ICs, can have different EM problems from that of planer ICs, due to their unique interconnects such as through-silicon vias (TSVs).
This dissertation investigates EM in various interconnect structures, and applies the EM models to optimize IC layout. First, modeling of EM is developed for chip-level interconnects, such as wires, local vias, TSVs, and multi-scale vias (MSVs). Based on the models, fast and accurate EM-prediction methods are proposed for the chip-level designs. After that, by utilizing the EM-prediction methods, the layout optimization methods are suggested, such as EM-aware routing for 3D ICs and EM-aware redundant via insertion for the future technology nodes in VLSI.
Experimental results show that the proposed EM modeling approaches enable fast and accurate EM evaluation for chip design, and the EM-aware layout optimization methods improve EM-robustness of advanced VLSI designs.Electrical and Computer Engineerin
Effective network grid synthesis and optimization for high performance very large scale integration system design
制度:新 ; 文部省報告番号:甲2642号 ; 学位の種類:博士(工学) ; 授与年月日:2008/3/15 ; 早大学位記番号:新480
Design methodology and productivity improvement in high speed VLSI circuits
2017 Spring.Includes bibliographical references.To view the abstract, please see the full text of the document
Recommended from our members
Physics-Based Electromigration Modeling and Analysis and Optimization
Long-term reliability is a major concern in modern VLSI design. Literature has shown that reliability gets worse as technology advances. It is expected that the future VLSI systems would have shorter reliability-induced lifetime comparing with previous generations. Being one of the most serious reliability effects, electromigration (EM) is a physical phenomenon of the migration of metal atoms due to the momentum exchange between atoms and the conducting electrons. It can cause wire resistance change or open circuit and result in functional failure of the circuit. Power-ground networks are the most vulnerable part to EM effect among all the interconnect wires since the current flow on this part is the largest on the chip. With new generation oftechnology node and aggressive design strategies, more accurate and efficient EM models are required. However, traditional EM approaches are very conservative and cannot meet current aggressive design strategies. Besides circuit level, EM also need to be thoroughly studied in system level due to limited power and temperature budgets among cores on chip. This research focuses on developing physical level EM model for VLSI circuits and system level EM optimization for multi-core systems in order to overcome the aforementioned problems. Specifically, for physical level, we develop two EM immortality check methods and a power grid EM check method. Firstly, a voltage based EM immortality analysis has been developed. Immortality condition in nucleation phase can be determined fast and accurately for multi-segment interconnect wires. Secondly, a saturation volume based incubation phase immortality check method has been proposed. This method can further reduce the redundancy in VLSI circuit design by immortality check in multiphase. Furthermore, both immortality check methods are integrated into a new power grid EM check methodology (EMspice) as filter for EM analysis. These filters can accelerate the simulation by filtering out immortal trees so that we only need to do simulation on fewer trees that are mortal. Coupled EM simulation considering both hydrostatic stress and electronic current/voltage in the power grid network will be applied to these mortal trees. This tool can work seamlessly with commercial synthesis flow. Besides physical level reliability models, system level reliability optimization is also discussed in this research. A deep reinforcement learning based EM optimization has been proposed for multi-core system. Both long term reliability effect (hard error) and transient soft error are considered. Energy can be optimized with all the reliability and other constraints fast and accurately compared to existing reliability management techniques. Last but not least, a scheduling based reliability optimization method for multi-core systems has been proposed. NBTI, HCI and EM are considered jointly. Lifetime of the system can be improved significantly compared to traditional methods which mainly focus on utilization
inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices
Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability.
This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from 30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads
Dependable Embedded Systems
This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems
- …